VANCO 280702 User Manual

HOME

THEATER

HDMI® Splitters

Vanco Part Numbers

280705 (4x8)
280708 (1x8)
280704 (1x4)
280702 (1x2)

Technical Support

www.vanco1.com • [e-mail] • 800-626-6445

DEAR CUSTOMER

Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully before
connecting, operating or adjusting this product.
Please keep this manual for future reference.

This product is 100% inspected and tested in the United States
to verify HDMI performance parameters.

WARNING

1. Do not expose this unit to water, moisture,
or excessive humidity.

2. Do not install or place this unit in a built-in
cabinet, or other conned space without
adequate ventilation.

3. To prevent risk of electrical shock or re
hazard, due to overheating, do not obstruct
unit’s ventilation openings.

4. Do not install near any source of heat,
including other units that may produce heat.

5. Do not place unit near ames.

6. Only clean unit with a dry cloth.

7. Unplug unit during lightening storms, or
when not used for an extended period
of time. A surge protector is strongly
recommended.

8. Protect the power cord from being walked
on or pinched, particularly at the plugs.

9. Use unit only with accessories specied by
the manufacturer.

10. Refer all servicing to qualied personnel.

CAUTION

HDMI is a very complex technology requiring continuous authentication of the signal and the same
video resolution and audio settings on all electronic equipment in the system. When there are multiple
sources and displays, the video resolution and audio setting on all connected units must be adjusted
to correspond with that of the display having the lowest video and audio capability.

2

www.vanco1.com

FEATURES

Super IR Control

These units have the capability of being controlled via IR signals. The splitter can be controlled from the
display. This is accomplished by using an optional IR Receiver pigtail (Part #280721) pointing away from the
display(s), which can be connected with the optional HDMI IR Adapter (Part # 280703), and inserted between
the HDMI cable connector and the display with the toggle switch at the “IR” position. The IR Transmitter pigtail
(Part # 280720) is then connected to the splitter and pointed at the source(s). A remote control is used at
the display to control the source.

*** These products are only compatible with Vanco’s Super HDMI IR Accessories.

Super IR Control System Over HDMI Cable

Blu-Ray

Player

HDMI

IR IR

IR TX

Pigtail

(1 per display for Matrix, Switches, Extenders

1 per source for Splitters)

Matrix, Splitter,

or Switch

IR Remote

HDMI

IR

RX Pigtail

HDMI IR
Adapter

HDTV

Over-Current Over-Voltage Protection

The circuit boards are equipped with both over-current and over-voltage protection and automatically power
down if these are encountered. The power circuit will restore itself automatically once the excessive current or
voltage conditions are rectied. The 4x8 splitter also features RS-232 control.

HDMI® 4 x 8 Splitter with IR and RS232 Control

Part # 280705

• Allows 4 HDMI Sources to be Connected to 8
HDMI Displays Devices

• High Speed Chip Set that Supports 3D, 4K x 2K

• Full HD1080P/120HZ

• HDCP Compliant

• Super IR & RS232 control system, IR transport

channel can be forward or backward, an IR
adapter and transmit and receive pigtails are
needed

• Supports Digital Audio Format, DTS-HD/Dolby­True HD/LPCM7.1/AC3/DTS/DSD

• Built-in equalization support output

• Unique Circuit Design Allows for Protection

against High Voltage and Peak Currents

• Tested for Compatibility with all leading HD
Video brands

• Tested with Whole Series 7.1 Home Theater
Systems

• Locking HDMI Compatible

• 19” Rack Mounting

• 5V DC, UL Listed Power Supply

• Dimensions: 17.25”W x 2”H x 8”D

800-626-6445

3

HDMI® 1 x 8 Splitter with IR Control

Part # 280708

• Allows 1 HDMI Source to be Connected to 8
HDMI Displays Devices

• High Speed Chip Set that Supports 3D, 4K x 2K

• Full HD1080P/120HZ, Cascading up to 3 layers

• HDCP Compliant

• Super IR control system, IR transport channel

can be forward or backward, an IR adapter and
transmit and receive pigtails are needed

• Supports Digital Audio Format, DTS-HD/Dolby­True HD/LPCM7.1/AC3/DTS/DSD

• Built-in equalization support output

• Unique Circuit Design Allows for Protection

against High Voltage and Peak Currents

• Tested for Compatibility with all leading HD
Video brands

• Tested with Whole Series 7.1 Home Theater
Systems

• Locking HDMI Compatible

• Shelf or Wall Mounting

• 5V DC, UL Listed Power Supply

• Dimensions: 12.5”W x 1.125”H x 6.5”D

HDMI® 1 x 4 Splitter with IR Control

Part # 280704

• Allows 1 HDMI Source to be Connected to 4
HDMI Displays Devices

• High Speed Chip Set that Supports 3D, 4K x 2K

• Full HD1080P/60HZ

• HDCP Compliant

• Super IR control system, IR transport channel

can be forward or backward, an IR adapter and
transmit and receive pigtails are needed

• Supports Digital Audio Format, DTS-HD/Dolby­True HD/LPCM7.1/AC3/DTS/DSD

• Built-in equalization support output

• Unique Circuit Design Allows for Protection

against High Voltage and Peak Currents

• Tested for Compatibility with all leading HD
Video brands

• Tested with Dolby 7.1 Home Theater Systems

• Shelf Mounting

• 5V DC, UL Listed Power Supply

• Dimensions: 4.375” W x 1” H x 3” D

4

www.vanco1.com