Vanco 280564 Technical Support
HDMI® 4x4 4K2K
Compact Matrix
Selector Switch
Vanco Part Number:
280564
Technical Support
www.vanco1.com • info@vanco1.com • 800-626-6445
www.vanco1.com
2
1. Do not expose this unit to water, moisture,
or excessive humidity.
2. Do not install or place this unit in a built-in
cabinet, or other conned space without
adequate ventilation.
3. To prevent risk of electrical shock or re
hazard, due to overheating, do not obstruct
unit’s ventilation openings.
4. Do not install near any source of heat,
including other units that may produce heat.
5. Do not place unit near ames.
6. Only clean unit with a dry cloth.
7. Unplug unit during lightening storms, or
when not used for an extended period
of time. A surge protector is strongly
recommended.
8. Protect the power cord from being walked
on or pinched, particularly at the plugs.
9. Use unit only with accessories specied by
the manufacturer.
10. Refer all servicing to qualied personnel.
CAUTION
HDMI is a very complex technology requiring continuous authentication of the signal and the same
video resolution and audio settings on all electronic equipment in the system. When there are multiple
sources and displays, the video resolution and audio setting on all connected units must be adjusted
to correspond with that of the display having the lowest video and audio capability.
WARNING
DEAR CUSTOMER
Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully before
connecting, operating or adjusting this product.
Please keep this manual for future reference.
This product is 100% inspected and tested in the United States
to verify HDMI performance parameters.
800-626-6445
3
FEATURES
The Vanco 280564 HDMI 4x4 Compact Matrix Selector Switch allows 4 HDMI sources
to be distributed to up to 4 displays simultaneously. Have multiple sources displayed
simultaneously on any display or have a single source duplicated on multiple displays,
exibility for the perfect solution. The 280564 is capable of up to 4K2K (2160p) Ultra
High Denition resolution and HD multi-channel audio distribution with simple control
using the front panel or remotely via IR Receivers at display locations. Also features EDID
management, which allows and encourages source and display “handshake” for seamless
integration. In addition, the 280564 is also equipped with RS-232 connectivity which allows
for third party integration. For reliable, no-nonsense HDMI distribution and control on a
budget, over short distances, the 280564 Matrix Selector Switch is a great choice for any
application
HDMI® 4x4 Compact Matrix Selector Switch
Part # 280564
• Allows up to 4 HDMI sources to be distributed
simultaneously to up to 4 displays
• Ultra HD capable Matrix Switcher providing a
perfect solution for Home or Retail AV as well
as Commercial and Hospitality Installations
• Features EDID management which supports
default HDMI EDID and has the ability to
learn the EDID of display equipment for any
“handshake” issues
• HDCP Compliant
• Supports 4K2K (2160p @ 30 Hz) Ultra High
Denition Resolution
• Supports HDMI Deep Color and 3D
• Supports 7.1 channel digital audio
• Wideband bi-directional IR pass-through (IR
transmitters, IR Receivers and IR Remote
Control Included)
• Equipped with RS-232 connectivity which allows
for third party integration
• Compact design for easy installation with
rack-mounting and wall-mounting design, rack
mounting ear set included
• Power Supply: DC 12V
• Dimensions: 10.2” W x 1” H x 4.4” D
www.vanco1.com
4
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are
contained in the shipping carton:
• (1) 280564 HDMI 4x4 Matrix Selector Switch
• (5) IR Receiver (RX)
• (4) IR Blaster (TX)
• (1) DC 12V, 2.5A power supply
• (1) Rack-mounting ear set
• (1) IR remote control
• (1) RS-232 serial cable
• (1) User Manual
SPECIFICATIONS
HDCP Compliance ...................................................... Yes
Video Bandwidth ........................................................ Single-link 297MHz
Video Support ........................................................... 480i/480p/720p/1080i/1080p @60/2160p @30
48-bit color
Audio Support ........................................................... Surround Sound (up to 7.1 ch) or stereo digital audio
and L-PCM at up to 192kHz, compressed audio (IEC 61937), DSD, DST, DTS and HBR
ESD Protection .......................................................... +/- 8 kV (air-gap discharge) & +/- 4 kV (contact
discharge)
PCB stack-up ............................................................ 4 layers
Input ........................................................................ 4x HDMI / 1x RS-232 / 1x IR socket for IR receiver
Output ...................................................................... 4x HDMI
HDMI connector ........................................................ Type A 19 pin female
3.5mm connector ...................................................... [System IR] Receives IR commands from remote
control
MECHANICAL SPECS
Housing .................................................................... Metal enclosure
Power Supply ............................................................ DC 12V, 2.5A
Power consumption .................................................... 20 watts (max)
Operation temperature ............................................... 32~104 °F
Storage temperature.................................................. -4 ~140 °F
Relative humidity ....................................................... 20~90 % RH (no condensation)
800-626-6445
5
PANEL DESCRIPTIONS
1. ON/OFF: Power ON/OFF switch
2. POWER: This red LED illuminates when the device is powered
3. IR EYE: IR eye which receives IR signals from included remote for matrix switching
4. OUTPUT A: Selects and displays which specic input is selected
5. OUTPUT B: Selects and displays which specic input is selected
6. OUTPUT C: Selects and displays which specic input is selected
7. OUTPUT D: Selects and displays which specic input is selected
8. INPUT PORTS: Inputs 1-4, LED light illuminates for each input when an active signal is being sent from the
source to the matrix unit
9. OUTPUT PORTS: Outputs 1-4, LED light illuminates for each output when an active display is connected to
the matrix unit
10. RS232: Port for use of PC control and EDID settings
11. 12V DC: Plug the 12V DC power supply into the unit and connect the adapter to AC wall outlet for power
12. IR EXT: Connect included IR RX receiver for extension, which receives IR signals from included remote for
matrix switching
13. IR IN: Connect included IR RX pigtails, to be used at each display for matrix switching control and source
control
14. IR OUT: Connect included IR TX pigtails, to be used at each source for source control
15. EDID Selector: Select HDMI output signal format via EDID Selector (located on the right side panel)
1 2 3
4 6
8
9
10
11
12
12
5 7
13 14
15
Loading...