Vanco 280332 Instruction Manual
Instruction Manual
1x2 Digital H
DMI Splitter/Extender
Model:
280332
Table Of Contents
1.0
Introduction
3
2.0
Specifications
4
3.0
Checking Package Contents
5
4.0
Connecting The Hardware
5
5.0
Operating The Unit
6
6.0
Installation of Mounting Component
s77.0
Troubleshooting
7
8.0
Limited Warranty
8
9.0
Regulatory Compliance
8
1.0 INTRODUCTION
Thanks for purchasing this 1x2 Digital HDMI Splitter/Extender from Vanco International. This
Splitter/Extender is designed to provide a way to distribute up to 2 HDMI signals to other
HDMI type devices without signal degradation or loss of encryption.
1.1 Liability Statement
Every effort has been made to ensure that this product is free of errors. Vanco International
cannot be held liable for the use of this hardware or any direct or indirect consequential
damages arising from its use. It is the responsibility of the user of the hardware to check that
it is suitable for his/her requirements and that it is installed correctly. All rights reserved. No
parts of this manual may be reproduced or transmitted by any form or means electronic or
mechanical, including photocopying, recording or by any information storage or retrieval
system without the written consent of the publisher.
Vanco International reserves the right to revise any of its hardware and software following its
policy to modify and/or improve its products where necessary or desirable. This statement
does not affect the legal rights of the user in any way.
1.2 FEATURES
The 1x2 Digital HDMI Splitter/Extender has many features that enable it to perform in a
superior manner. Among those features you will find:
Distributes 1 HDMI source to 2 destinations
Supports 480i, 480p, 720p, 1080i and 1080p resolution
HDMI Certified by Silicon Images ATC Laboratory
Supports DDWG standard for HDMI compliant monitors
HDCP Compliant, RoHS Compliant
3
Loading...