1
Features
• Quarter turn (90°) operation
• Long life brushless motor
• Multi-voltage capable (5610 models only) with auto-voltage
sensing
• External LED multi-color diagnostic light
• IP67 weatherproof enclosure, UV resistant
• ISO5211 multi-flange valve mounting pad
• Thermostatically controlled anti-condensation heater
• Manual override
• Highly visual valve position dome style indicator
• Auxiliary limit switches to confirm valve open/closed positions
• DPS Digital Positioner option
• BSR Battery Backup/Failsafe option
• Nominal life >60,000 cycles
Applications
Multi-voltage electric actuators are typically used to automate quarter
turn ball valves, butterfly valves and dampers. The 5610/5615 series
actuators are quick and easy to install with standard ISO5211 multiflange mounting and a double square output drive.
Construction
Description
Electric actuator uses power-to-open and power-to-close, stays in the
last known position with power failure. On receipt of a continuous
voltage signal, the motor runs and via a flat gear system rotates the
output drive 90º. The motor is automatically stopped by internal cams
striking limit switches. On receipt of a reversing continuous signal, the
motor turns in the opposite direction reversing the output drive position.
Operation
Optional Functions
BSR: Battery Spring Return - actuator fails to
a safe position with loss of power
DPS: Digital Positioning System - valve
position controlled by either a 4-20mA or
0-10V control signal
Doc: 5610.5615.1120 Cornelius, N.C. • USA www.valworx.com
Feature packed electric actuators take the
valve automation industry to the next level.
Features include a LED status indicator,
manual override for emergency hand operation, visual valve position indicator and
electronic over-torque protection. Easy wiring
via DIN plug connectors eliminate the need to
remove the cover, saving time and money.
Two auxiliary dry contact limit switches are
supplied to confirm valve open and closed
position. Standard anti-condensation heater
will help protect against condensation
build-up inside the actuator.
Enclosure Anti-corrosive polyamide, weatherproof IP67
Electrical Connections DIN 43650/ ISO4400 plug connectors, cable entry
Output Drive Zamac, female double square
Valve Position Indicator Clear polycarbonate dome with polyamide indicator
Manual Override Polyamide knob
Gears Steel and polyamide
Main External Shaft Polyamide
Fasteners Stainless steel
Approvals
• CE mark, conforming to:
- 2006/42/EC Machinery Directive
- 2006/95/EC Low Voltage Directive
- 2004/108/EC EMC Compatibility
• ISO5211 Compliance
• IP67 weatherproof enclosure
SERIES
5610
5615
Multi-Voltage Electric Actuators
12 to 240V
177-752 in lbs (20-85 Nm)
2
SERIES
5610
5615
Doc: 5610.5615.1120 Cornelius, N.C. • USA www.valworx.com
Manual override
Weatherproof enclosure
rated IP67
Electrical connections via
standard DIN style plug
connectors
Corrosion resistant polyamide
enclosure with UV protection
Auto-Manual selector lever
Highly visual dome position
indicator
Auxiliary limit switches to
confirm open and closed
position
External LED diagnostic light
Thermostatically controlled
anti-condensation heater
Heavy Duty brushless motor
ISO5211 International
standard multi-flange valve
mounting pad
Construction Features
Typical Applications
Multi-Voltage Electric Actuators
12 to 240V
177-752 in lbs (20-85 Nm)
3
Doc: 5610.5615.1120 Cornelius, N.C. • USA www.valworx.com
Stock Number
561020E 561055E 561085E
Voltage Range AC or DC Auto-Voltage Sensing
(1ph,50/60Hz), - 0/+5%
24-240V AC or
24-135 V DC
24-240V AC or
24-135 V DC
24-240V AC or
24-135 V DC
Cycle Time - Seconds/0-90° (no load) 9 sec 13 sec 29 sec
Maximum Run Torque
177 in lbs
20 Nm
486 in lbs
55 Nm
752 in lbs
85 Nm
Maximum Break Torque 221 in lbs
25 Nm
530 in lbs
60 Nm
796 in lbs
90 Nm
Duty Cycle 75%
Over-load Protection Electronic over-torque with LED status light
Enclosure Anti-corrosive polyamide with UV protection
Enclosure Rating IP67 weatherproof
Working Angle (rotation) 90 degrees
Temperature Range -4~+158° F (-20~+70° C)
Motor Switches 2 x SPST limit switches
Position Confirmation Switches 2 x SPST limit switches, 3A @125/250VAC, 30VDC resistive load
Anti-condensation Heater 4 watts
Electrical Connections Plug connectors per DIN EN175301-803, cable entry, screw terminals
Current (Full Load Amps) 24VDC
24VAC
110VAC
240VAC
0.97A
1.28A
0.30A
0.16A
1.63A
1.98A
0.43A
0.21A
1.22A
1.50A
0.33A
0.18A
Valve Mounting Interface per ISO5211 F03, F04,
F05
F05, F07 F05, F07
Output Drive - Female Double Square 11mm 14mm 17mm
Weight 4.0 lbs (1.8 kg) 5.3 lbs (2.4 kg) 6.2 lbs (2.8 kg)
Specifications
SERIES
5610
5615
Multi-Voltage Electric Actuator Models
24 to 240 Volt AC or 24-135 Vollt DC
177-752 in lbs (20-85 Nm)
4
Doc: 5610.5615.1120 Cornelius, N.C. • USA www.valworx.com
SERIES
5610
5615
Specifications
Single Voltage Electric Actuator Models
12 Volt AC/DC
177-752 in lbs (20-85 Nm)
Stock Number
561520 561555 561585
Voltage Range AC or DC Auto-Voltage Sensing
(1ph,50/60Hz), - 0/+5%
12v AC or DC 12v AC or DC 12v AC or DC
Cycle Time - Seconds/0-90° (no load) 9 sec 13 sec 29 sec
Maximum Run Torque
177 in lbs
20 Nm
486 in lbs
55 Nm
752 in lbs
85 Nm
Maximum Break Torque 221 in lbs
25 Nm
530 in lbs
60 Nm
796 in lbs
90 Nm
Duty Cycle 75%
Over-load Protection Electronic over-torque with LED status light
Enclosure Anti-corrosive polyamide with UV protection
Enclosure Rating IP67 weatherproof
Working Angle (rotation) 90 degrees
Temperature Range -4~+158° F (-20~+70° C)
Motor Switches 2 x SPST limit switches
Position Confirmation Switches 2 x SPST limit switches, 3A @125/250VAC, 30VDC resistive load
Anti-condensation Heater 4 watts
Electrical Connections Plug connectors per DIN EN175301-803, cable entry, screw terminals
Current (Full Load Amps) 12VDC
12VAC
1.95A
2.28A
3.42A
3.78A
2.28A
2.65A
Valve Mounting Interface per ISO5211 F03, F04,
F05
F05, F07 F05, F07
Output Drive - Female Double Square 11mm 14mm 17mm
Weight 4.0 lbs (1.8 kg) 5.3 lbs (2.4 kg) 6.2 lbs (2.8 kg)
Loading...