Duomo Wireless Speaker
(V-AS330T)
A statement piece with its unique design, the wireless features lets you connect conveniently
for your favourite tunes. Plus, enjoy your music directly from the dual front speakers.
Important: Please read the user manual thoroughly before using your Bluetooth Speaker.
Specifications: Package Contents:
• Model: V-AS330T
• Bluetooth version: 3.0
• Wireless range: Up to 10 metres
• Battery type: Lithium-ion
• Power input: DC12V/1.2A
• Playback time: 3 hours
• Charging time: 2 hours
• S/N ratio: ≥75dB
• Speaker power: 5W x 2R
• Speaker impedance: 4 Ohm
• Speaker frequency: 80Hz ~ 18kHz)
• Material(s): Aluminium + Plastic
• Dimensions (L x W x H): 200 x 220 x 115mm
• Weight: 1800g
• Duomo wireless speaker
• Ac Adapter
• Auxiliary cable
UNDERSTANDING THE PRODUCT
①
⑤
⑥
② ③ ④
① Speaker
② Reset (connection)/ Volume‘ + ’
③ ON/OFF switch
④ Volume ‘ – ’
⑤ NFC touch point
⑥ Auxiliary port
⑦ AC input port
⑦
START USING THE WIRELESS SPEAKER
1) Charging the speaker (1.2A wall plug adapter included)
Make sure that the wireless speaker is turned off before charging. Plug the adapter cable into
the charging port located at the lower back of the wireless speaker and connect it to a wall
plug.
To fully charge the speaker, it will require at least 2 hours and indicated by a solid LED light.
Note: Please charge the speaker for at least 8 hours before first use. Please make sure that the speaker is
switched off when charging is in progress.
2) Turning on/off the speaker
Press and hold the ‘ON/OFF’ button for about 5 seconds to turn on the speaker, thus
producing an audible sound and displays a solid LED light to indicate that the speaker is
turned on.
Press and hold the ‘ON/OFF’ button again for another 5 seconds to turn off the speaker.
3) Pairing the wireless speaker via Bluetooth
Step 1: Turn on the wireless speaker.
Step 2: Activate Bluetooth function on your mobile device to begin pairing with the speaker.
Step 3: Connect to the speaker by selecting ‘Valore AS330T’ under the device list.
Step 4: Once connected, the speaker then produces an audible sound to indicate that the
connection is successful.
Note: If the pairing is not successful, press the ‘Reset’ button and then re-pair again. After pairing is
successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
4) Pairing the wireless speaker via NFC (android only)
Step 1: Turn on the wireless speaker
Step 2: Enable NFC function on your mobile phone (NFC settings may be found under your
devices' "More/Additional Settings")
Step 3: Gently hold your mobile phone over the NFC logo located at the side of the Bluetooth
speaker, while making minimal contact.
Step 4: Once connected, the speaker then produces an audible sound to indicate that the
connection is successful.
5) Auto connection with the wireless speaker
Each time the wireless speaker is turned on, it will attempt to connect to the last device it was
paired with automatically (mobile device with Bluetooth function turned on).
Loading...