Valore Power Bank Wireless Speaker
Thank you for purchasing the Valore Power Bank Wireless Speaker (BTS-449)
Designed for outdoor enthusiasts, this portable wireless speaker also doubles up as a power
bank and comes with a built-in carabiner for you to clip onto your backpack or clothes
on-the-go. Plus, it is certified to IPX4 international standard which guarantees effective splash
resistance.
Important: Please read the user manual thoroughly before using your power bank wireless
speaker.
Specifications: Package Contents:
• Battery type: Built-in Lithium-ion
• Battery capacity: 4400mAh
• Wireless range: Up to 10m
• Input: 5V/1.0A (max)
• Output: 5V/2.0A (max)
• Playback time: up to 40 hours
• Charging time: 8 hours (5V/1.0A USB adapter)
• Material: ABS plastic + iron mesh grills + silicone band
• Dimension (L x W x H): 185 x 68 x 28mm
• Weight: 270g
UNDERSTANDING THE PRODUCT
• Power bank wireless speaker
• Mirco-USB charging cable
• Auxiliary Cable
① Power button
② LED indicator
③ Built-in mic for speaker phone function
④ Built-in carabiner
⑤ Charger switch
⑥ 4 LEDs display for charger indication
⑦ Input recharging port - Micro USB
⑧ Output charging port - Standard USB
⑧
⑤
①
④
②
③
(BTS-449)
⑥
⑦
START USING THE POWER BANK WIRELESS SPEAKER
1) Charging the power bank wireless speaker
Open the rubber cover, connect the Micro-USB port with the recharge cord and its USB plug
to an USB port power source. The 4 LED lights will light up and flash to indicate recharging of
the power bank wireless speaker. When it is fully charge, all 4 LEDs will stop flashing and stay
lit.
Noted: It take approx. 5~8 hours for every recharge. During recharging you cannot use the standard USB port
for output charging at the same time.
2) Checking your power bank battery level
Open the rubber cover, press the charger switch once to turn on level checking.
4 LEDs are lit - 90% - 100%
3 LEDs are lit - 60% - 90%
2 LEDs are lit - 30% - 60%
1 LED is lit and flashing - 10% - 20%
If power bank is less than 10%, it will turn off automatically.
3) Charging your device
Open the rubber cover, connect the charging cord (not provided) to the standard USB port of
the power bank. Connect the other end to your smart phone device. Press the charger switch
once to turn on the power bank and the output leds will lit continuously to indicate charging of
your device. If the power bank do not detect output loading in approx. 30secs, it will turn off
automatically. You then need to repeat the above steps to turn on the power bank again before
you can charge your devices.
Loading...