Valore AC8810 User Manual

Wireless Selfie Stick (AC8810)

Thank you for purchasing the Valore Wireless Selfie Stick.

Take your self-portraits or group photos to the next level with this wireless selfie stick that
connects to your smartphone via Bluetooth connection. Snap away with the on-board selfie
shutter button anytime, anywhere you go.

Important: Please read the user manual thoroughly before using your selfie stick.

Specifications: Package Contents:

• Wireless range: 10m • Wireless selfie stick

• Battery: Built-in battery 150mAh • Soft pouch

• Charging time: 1hr • USB charging cable

• Length extension: 230 - 960mm • Secure strap

• Support: Android 3.0 above, iOS 5.0 above

• Material: Aluminium, ABS plastic

• Dimension (L x W x H): 230 x 40 x 35mm

• Weight: 160g

UNDERSTANDING THE PRODUCT

①

③

②

⑥

⑤

④

⑦

⑧

① LED indicator

② Multi-functional button

③ Mode selection button (Android or iOS)

④ Lock nut

⑤ Micro USB charging port

⑥ ON/OFF button

⑦ Retractable handle

⑧ Mobile phone clamp

START USING THE WIRELESS SELFIE STICK

1) Charging the selfie stick

Connect your selfie stick to the USB adapter using the provided charging cable. The red LED

light will switch on when charging, then turn blue when the battery is fully charged.

2) Bluetooth pairing and connecting

Step 1: Switch the ON/OFF button to ON and the LED light will flashes Blue and Red rapidly.

Step 2: Activate Bluetooth function on your mobile device to begin pairing with selfie stick.

Step 3: Connect to the selfie stick by selecting ‘Valore-AC8810’ under the device list.

Step 4: Select either iOS or Android by pressing the Mode selection button in order to define

your compatible device.

Note: If the pairing is not successful, please turn off wireless selfie stick first and then re-pair
again. After pairing is successful, paired devices will remember each other. Unless pairing

information is deleted because of new pairing, no need to pair when using the next time.

If you want to pair the wireless selfie stick with other devices, please turn off Bluetooth

function of existing source device, and pair the wireless selfie stick with the new device

according to steps 1-4 mentioned above.

3) Re-pairing the wireless selfie stick

Each time the wireless selfie stick is turned on, it will attempt to connect to the last device it

was paired with automatically (mobile device with Bluetooth function turned on).