Valor ovation 810 Installation And Operating Manual

INSTALLATION AND OPERATING GUIDE

For

Ovation

OvationOvation

Ovation

Electric Stove

Electric StoveElectric Stove

Electric Stove

Model 810

Model 810Model 810

Model 810

(Coal and Log Versions)

600B675/01

This guide is intended to help you install and
care for your Valor electric stove. Please read

carefully before installing and using your

stove.

Important

Please keep your Guide in a safe place for

future reference

2222

Customer Care

Thank you for choosing Valor

All Valor appliances are designed to meet the most stringent quality, performance and safety
requirements to provide our customers with many years of trouble free service. This guide aims to
improve your understanding and appreciation of your new Valor stove by providing simple and
informative instructions to enable you to install it and to ensure that you benefit from the excellent
performance and features it has to offer.

If you require further assistance, the Valor AdviceLine will be pleased to help.
Please telephone [phone] (local rates apply in the United Kingdom)

FOR OTHER USEFUL TELEPHONE NUMBERS SEE THE BACK COVER

Important Safety In structions

It is important that the following safety instructions are followed

Always

• install the stove in accordance with these instructions. If in doubt, obtain expert advice.

• make sure that the electrical socket is accessible and located adjacent to, but not above or

below, the stove.

• disconnect the stove from the electrical supply before carrying out cleaning, maintenance or
replacing lamps.

• use a fireguard when young children and infirm persons can come into contact with the stove.

• use genuine Valor spares.

Never

• leave children unsupervised in a room where the stove is on.

• obstruct or cover the fan outlet, cover the stove or force items into the stove openings.

• use aerosols on or around the stove.

• position furniture, curtains or other combustible materials within one meter of the stove.

• use the stove to dry clothes etc.

• operate the stove via a time switch. This could cause a fire risk if any clothing, fabrics or other

combustible materials are accidentally left placed over the stove when it switches on.

• sit or stand on the heater.

3333

Figure 1

Siting

Your Valor stove is designed to be free
standing on a level surface but when siting
it please bear the following points in mind.

T Never use the stove anywhere where

water is in use, i.e. bathrooms, show er
rooms etc.

T If y ou are placing it in an alcove, make

sure that the side clearances are at
least as shown in figure 1.

T Although your stove complies with all

the safety standards some types of floor
coverings (e.g. vinyl tiles, synthetic deep pile
carpets) may be affected by the hot air from the fan. If
this could apply to your floor covering, we suggest that
you place the stove on a shallow plinth which projects
approximately 20cm forward of the front feet (See figure 1).

T Keep loose hearthrugs etc. away from the front of the stove. They could obstruct

the free flow of hot air from the fan.

T Do not locate the stove immediately under a fixed electrical socket. The socket must always be

accessible so that the stove can be easily disconnected.

T Do not route the mains supply cable under carpet etc.