Valor accolade 806 Installer's And Owner's Manual

Accolade

INSTALLER’S AND OWNER’S GUIDE

For

Electric Heater

Model 806

We trust that this Guide gives sufficient details to enable the appliance to be installed and

maintained satisfactorily. However, if further information is required, our Valor

Technical Helpline will be pleased to help.

Please telephone [phone] (National call rates apply in the United Kingdom).

KEEP IN A SAFE PLACE FOR FUTURE REFERENCE

©

Valor Heating

3002911/04

INSTALLER’S AND OWNER’S GUIDE

Page 2

CUSTOMER CARE

All our heaters are designed to meet the most stringent quality, performance and safety
requirements to provide our customers with many years of trouble free service. This
guide aims to improve your understanding and appreciation of your new heater, by
providing simple and informative instructions to enable you to install it and to ensure that
you benefit from the excellent performance and features it has to offer.

IMPORTANT SAFETY INSTRUCTIONS

It is important that the following safety instructions are followed

Always

• Always install the heater in accordance with the instructions, if in doubt obtain expert
advice.

• Always make sure the electrical socket is accessible and located adjacent to, but not
above the heater.

• Always disconnect the heater from the electrical supply before carrying out cleaning,
maintenance or replacing lamps.

• Always make sure the heater is firmly fixed to prevent the fire from being tipped over.

• Always use a fireguard when young children and infirm persons can come into

contact with the heater.

• Always use genuine spares.

Never

• Never leave children unsupervised in a room where the heater is on and unguarded.

• Never allow children to play with the decorative pebbles supplied with this heater

• Never obstruct or cover the fan outlet or force items into heater openings.

• Never install or use the heater anywhere where water is in use, i.e. bathrooms, shower

rooms etc.

• Never use aerosols or steam cleaners on or around the heater.

• Never route the mains supply cable under carpet etc.

• Never install the heater close to curtains or combustible materials.

• Never use the heater to dry clothes etc.

INSTALLER’S AND OWNER’S GUIDE

Page 3

Figure 1. Appliance Dimensions

INSTALLATION

Location

This heater is intended for use in a fireplace opening generally conforming to British
Standard 1251 for a nominal 400mm (16 inch) or 450mm (18 inch) Fireplace. It may
also be located in other fireplace openings or in a wooden surround, where the following
dimensions are available.

Width 390 – 450mm
Height 555 – 590mm
Depth At least 75mm

Alternatively the heater can be fitted to a flat wall or surround using the spacer frame
provided.

Installing

The heater must be fixed into position to prevent it from being tipped over.
The following fixing options are available: -

Screw fixing
Wire fixing
Spacer frame
The parts required for the above fixing options are included with this appliance.