Valor 802, 801 Installation And Operating Manual

INSTALLATION AND OPERATING GUIDE

For

Electric Heaters

Model 801

With

Adorn, Icon, Visage, Elegant or Ultimate Fireslide fronts

&

Model 802

Ultimate, Cosyflame, Fyrside, Nebula & Pizzazz versions

600B599/06

This guide is intended to help you install and care for

your Valor electric heater. Please read carefully before

installing and using your heater.

Important

Please keep your Guide in a safe place for future

reference

2

CUSTOMER CARE

Thank you for choosing Valor

All Valor heaters are designed to meet the most stringent quality, performance and safety requirements to provide our
customers with many years of trouble free service. This guide aims to improve your understanding and appreciation of
your new Valor heater, by providing simple and informative instructions to enable you to install it and to ensure that you
benefit from the excellent performance and features it has to offer.
If you require further assistance, the Valor AdviceLine will be pleased to help.

Please telephone [phone] (local rates apply in the United Kingdom

)

FOR OTHER USEFUL TELEPHONE NUMBERS SEE THE BACK COVER

IMPORTANT SAFETY INSTRUCTIONS

It is important that the following safety instructions are followed

Always

Always install the heater in accordance with the instructions. If in doubt obtain expert
advice.
Always make sure the electrical socket is accessible and located adjacent to, but not above
the heater.
Always disconnect the heater from the electrical supply before carrying out cleaning,
maintenance or replacing lamps.
Always make sure the heater is firmly secured to the fireplace opening to prevent the fire
from being tipped over.
Always use a fireguard when young children and infirm persons can come into contact
with the heater.
Always use genuine Valor spares.

Never

Never leave children unsupervised in a room where the heater in ON and unguarded.
Never obstruct or cover the fan outlet or force items into heater openings.
Never install or use the heater anywhere where water is in use, i.e. Bathrooms, Shower
Rooms etc.
Never use aerosols on or around the heater.
Never route the mains supply cable under carpet etc.
Never install the heater close to curtains or combustible materials.
Never use the heater to dry clothes etc.

3

General

Appliance dimensions

Model Projection into

cavity (mm)

Projection into

room (mm)

Overall depth

(mm)

Width (mm) Height (mm)

801 Adorn 68 153 221 545 768
801 Icon 68 59 127 631 622
801 Visage 68 89 157 529 611
801 Elegant 68 89 157 529 611
801 Ultimate
Fireslide

68 89 157 475 600

802 Ultimate 68 89 157 475 600
802 Cosyflame 68 89 157 475 600
802 Fyreside 68 79 147 475 600
802 Pizzazz 68 79 147 475 600
802 Nebula 68 89 157 475 600

Fireplace opening

This heater is intended for use in a fireplace opening generally conforming to British Standard 1251 for a nominal 400mm
(16 inch) or 450mm (18 inch) Fireplace. It may also be located in other fireplace openings or in a wooden surround,
where the following dimensions are available.
Width 390 – 450mm
Height 555 – 590mm
Depth At least 75mm

Clearance for servicing

There should be a clearance of at least 30mm between the top of the appliance and any mantle or shelf so that the outer
surround can be lifted off for servicing access.

Spacers and Wall Kits:

The heater is of a slim design and should suit most fireplace openings and fire surrounds, however there may be some
applications that require the need for either a spacer or flat wall kit. The following table identifies which spacer or wall kit
is available for each heater. The Model 802 Fyreside version is supplied with a 75mm wall kit. For all other appliances the
kits are optional extras obtainable either from the your heater supplier or direct from Valor Sales.

Model 60mm (2.1/2”) Surround Rebate Flat Wall (no recess)

20mm Spacer Kit No. 75mm Wall Kit No.

Model 801 Ultimate Fireslide 05801R1 05801T1
Model 801 Visage 05801S1 05801U1
Model 801 Elegant 05801S1 05801U1
Model 801 Adorn Not Available Not Available
Model 801 Icon Not Available Not Available
Model 802 Ultimate,
Nebula, Cosyflame, Fyrside
& Pizzazz

05801R1 05801T1

Unpacking

Model 801 with Visage, Elegant or Ultimate Fireslide front & Model 802

These are packed in a single carton. This contains the main appliance. In a separate box is the cast fascia complete with
coal pack. Model 802 Fyrside also includes a 75mm wall spacer kit.

Model 801 with Adorn front – Twin Pack

Pack 1 - Main Fire Pack
Pack 2 – Contains cast iron face, the fuel effect and coal pack.

Model 801 with Icon front – Twin Pack

Pack 1 - Main Fire Pack
Pack 2 – Contains the face complete with log effect