Valor 725RTB Black Installation Instructions Manual

725 Riser Kit

Use with Valor 700, 738 & 739 Models only

Installation Instructions

The 725 Riser is intended to be used on Valor heaters models 700, 738 & 739. Mounting of the 725 does not affect
clearances or other specifi cations listed in the heater installation manuals—see installation manual supplied with the
heater for more information.
The Insert appliance is approved for shimming underneath using combustible material.

Compatible with 700 (G3.5)
709 - 3 sided fl oating trim includes
710 backing plate only
717BPB - Backing plate for Edgemont 716 or 721
719BPB - Backing plate for Edgemont 716 or 721

Compatible with 738/739 (G3)
741, 742, 743, 744, 745 & 772 - Standard insert fronts
746 - Contour trim kit
756 - 3 sided square trim kit

725 is a 2.1/2” high sheet metal riser that fi ts beneath
the fi replace engine and various trims to raise the
heater to cover a higher fi replace opening.

3-15/16”

(100 mm)

700/738/739 engine

Overview

4004914-02

© Copyright Miles Industries Ltd., 2016

40” (1016 mm)

2-1/2”

(64 mm)

Installation

Place the base under the front of the appliance
installed and shimmed in the cavity. Center the base.

Riser set back to
face of fi replace
opening

Repair Parts List

Description Part Numbers

725RTB Black

Riser panel 4004913AZ
Screw 8 x 32 c/sunk (2) 4001186

Appliance can be shimmed
using combustible material

Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.

190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1

2

Designed and Manufactured by / for

Miles Industries Ltd.

Tel. [phone] Fax [phone]

www.valorfi replaces.com