Valor H3 Series, 1035BPB-RC, 1040BPB-RC Installation Manual

INSTALLATION MANUAL

H3 Series

1035BPB-RC Three-sided Backing Plate Kit

CSA approved for use with Valor H3 1000 Heater Models
(in Retrofi t applications)

INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.

The 1035BPB-RC backing plate is intended to be used on Valor heaters models H3 1000 in retrofi t applications. Refer
to installation manual supplied with appliance for clearances to combustible and other specifi cations when using the
1035BPB-RC “Retrofi t Application” Backing Plate.

The 1035BPB-RC needs to be fi tted with the 1045CFV—Clearview Front Surround to complete the installation.

Note: Intended to install into existing cavity and overlap existing wall finish. Backing plate mounts in fixed
position and does not adjust for additional finish material.

39-1/2” (1004 mm)

Left hand door

Backing plate assembly

32-1/4” (819 mm)

H3 1000

Right hand door

7ULPȵXVKZLWKERWWRPRIDSSOLDQFH

4007607-01

© Copyright Miles Industries Ltd., 2019

Removable bottom panel

Overview

Installation

1. On completion of appliance installation, insert the
backing plate assembly into the liner box, and at­tach it using 4 screws into the left and right sides.

3. Insert the left hand door.

a. Insert the door tabs straight into the top and

bottom slots behind the front panel of the plate.

b. Slide the door down to secure it.

a

b

2. Slide the removable panel into the clips in the side
panels.

4. Repeat for right hand door.

2