Valet N517 Quick Start Manual

Wireless

Home Alarm

System

N517

Quick Start Guide

For Technical Support Call 02 4577 4708 8.30am- 5.00pm Monday-Friday.

Designed and Manufactured in Australia

What You Get

Below is a list of parts included with system.

Item Description Qty Image

1. Main control unit

The unit incorporates a powerful siren, flashing blue strobe &
backup battery to run the system in case of mains power failure.
There is also a tamper button. The system has mains connection
via a low voltage plug pack that is supplied with the unit. For
manual override of the system there is a key switch on the main
unit.

1

2. Remote controls

2 x High Security Code Hopping Remote Controls. These allow
you to easily arm & disarm the system from anywhere in your
home. In case of duress, you can trigger the alarm at any time
from the remote control.

3. Power Supply (plug pack)

The main unit requires a regular mains power supply.
The system is supplied with a 9V AC plug pack that connects to
the main unit.

4. Screamer

This high frequency siren generates an intolerable noise to the
human ear, and is designed to help repel intruders from within
your home. It mounts easily to the roof of one of your rooms, and
is simply cabled back to the main control unit (10m of cable is
provided).

5. Passive Infrared Detectors

Designed to detect the body movement of an intruder inside your
premises. These intelligent devices allow simple installation, as no
cable is required between the main unit and the detectors. The
long life lithium batteries will last for up to 3 years, and the
system will automatically let you know when the batteries need
replacing.

6. High Security – Override keys

Used for manually overriding the system if both remote controls
are lost and also when the system is not being used (in storage).

2

1

1

2

2

7. Mounting Material & Screws

4 large pan head screws, 4 green star plugs (for main unit), 4
medium counter sunk gyprock screws (for screamer), 2 wall
plugs, 2 small counter sunk self tapping screws and mounting
brackets (for detectors).