Valcom VIP-160-IC Quick Manual

Qty.

Item

1

VIP-160-IC

1

VSP Document

1

RJ-45 Patch Cable

Issue 1

Issue 1

VIP-160-IC

INFORMACAST® COMPLIANT

TALKBACK IP CEILING SPEAKER

INTRODUCTION

The VIP-160-IC Talkback IP Ceiling Speaker is
compatible with Singlewire InformaCast and
InformaCast CK systems, allowing hands free
talkback paging access to a single location
anywhere on the IP network. All control of the
speaker features is performed through the
InformaCast system. A call switch input is provided
for call initiation from the speaker location.
Connections are provided for an optional LED call
indicator, a mute switch and line level audio output.

The enclosure is made of steel with a durable white
powder-coated finish. Power is provided to the
VIP-160-IC via a Power over Ethernet (PoE) switch
meeting the 802.3af specification

SPECIFICATIONS

Access Methods

InformaCast, InformaCast CK

HTTP interface for status & configuration

Features

RJ-45 network connection
Power over Ethernet (PoE) 802.3af compatible
DHCP addressable
Firmware upgradeable for future needs
Connector for Mute switch
Connector for LED call indicator
Line output supports Valcom Amplified

Speakers

DIMENSIONS/WEIGHT

13.00” Dia x 3.00” D

(33.02cm Dia. x 7.62cm D)

Weight: 2.5 lbs (1.13 kg)

Environment

Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating

INSTALLATION

FCC Information

This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses and can radiate radio
frequency energy and if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case the
user will be required to correct the interference at
his own expense.

Packing List

1 947713

CAUTION: To reduce the risk of electric shock,

Do not remove cover.

No user serviceable parts inside.

Refer servicing to qualified service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous

voltage constituting a risk of electric

shock is present within this unit.

This symbol indicates that there are

important operating and maintenance

instructions in the literature accompanying

this unit.

Precautionary Designations

Network Connection

The Talkback IP Speaker has one CAT-5 RJ-45
network connector on the rear panel. Use the
supplied CAT-5 patch cable to connect the
Talkback IP Speaker to an Ethernet switch.
See Figure 1 for detailed connections.

Call Switch Connection

The Talkback IP Speaker provides a call switch
input via screw terminal connections. See
Figure 1 for detailed connections.

Mute Out Connection

The Mute Out may optionally be connected to the
mute input of Valcom Classroom audio
management systems in order to suspend locally
originated classroom audio during intercom
announcements.

LED (+) and (-) Connection

LED (+) and (-) is a current limited output designed
to illuminate an optional LED. The LED is intended
to provide visual indication of call progress. The
LED illumination will flash when the call switch is
pressed and will continue to flash until the call is
answered. The LED illumination will be solid while
a connection to the IP Talkback Speaker is
established.

MOUNTING

Cut an 8.50” diameter in ceiling tile. After
connections have been made to the speaker,
attach speaker to ceiling tile using the mounting
hardware provided. (A metal backbox with rails is
available separately as model V-9816M).

Network Connection

The VIP-160-IC has one CAT-5 RJ-45 network
connector on the rear panel. Use the supplied
CAT-5 patch cable to connect the VIP-160-IC to
an Ethernet switch. (See Figure 1).

-10 dB Line Level Out Connection

The -10dBm Line Level Out may be connected to
up to 40 Valcom Self Amplified Speakers in order to
provide additional sound reinforcement in an area.

Figure 1. VIP-160-IC Connections

2 947713