VSP-V-9020
Issue 6
V-9020 – CEILING SPEAKER
INTRODUCTION
The V -9020 Ceiling Speaker is designed to easily
install into standard T-Bar suspended ceilings by
replacing 1/2 of a 2' x 2' ceiling tile (or 1/4 of a 2' x 4'
tile). The 1' x 2' perforated grille provides increased
sound dispersion over conventional round speaker
grilles and blends into the ceiling by providing the
appearance of a standard air return.
The speaker assembly features a perforated steel
grille, finished with a durable white epoxy powder
paint and an 8" full-range speaker. The V -9020 is
provided with a single input 1 Watt amplifier and
operates on 24VDC. A 24" T-Bar is included to cover
the area where the speaker assembly and ceiling tile
meet.
SPECIFICATIONS
Features
• Perforated steel grille with white epoxy paint
• 8" (20.32cm) speaker
Dimensions / Weight
Dimensions: 23.75" L x 11.82" W x 3.40" D
(60.33cm L x 30.02cm W x 8.64cm D)
Weight: 6.5 lbs. (2.95) Kg.
Technical Specifications
Power Rating: 1Watt Continuous
Operating Voltage / Current: 24VDC, 50mA
SPL at 1 Meter with 1 Watt Input: 97dB
Environment
Temperature: 0 to 50 Deg. C (32 to 122 Deg. F)
Humidity: 0 to 85% non-precipitating
Coverage
The area covered by the V -9020 Ceiling Speaker is
determined by the height of the ceiling. If the ceiling
height is 8 feet, the speaker will cover 250 sq. ft. With
a ceiling height of 9 to 15 feet, the speaker will cover
400 sq. ft. If the ceiling is 16 to 25 feet high, the
speaker will cover 850 sq. ft.
CONNECTIONS
MOUNTING
When mounting in a 2' x 2' tile ceiling, cut ceiling tile
in half (When mounting in a 2' x 4' tile, remove 1/4 of
the tile). Make connections and place speaker on
ceiling grid. Slide T-Bar under edge of speaker. Drop
remainder of cut tile next to speaker.
1 947911
TECHNICAL ASSISTANCE
When trouble is reported, verify that there are no
broken connections leading to this unit. Assistance
in troubleshooting is available from the factory. Call
(540) 563-2000 and ask for Technical Support, or call
(540) 767-1555 for Valcom 24-hour Faxback System or
visit our website at http://www.valcom.com.
Valcom equipment is not field repairable. Valcom, Inc.
maintains service facilities in Roanoke, VA. Should
repairs be necessary, attach a tag to the unit clearly
stating company name, address, phone number,
contact person, and nature of the problem.
Send the unit to:
Valcom, Inc.
Repair & Return Dept.
5614 Hollins Road
Roanoke, VA 24019-5056
VALCOM LIMITED WARRANTY
Valcom, Inc. warrants its products to be free fro m defects in materials and workmanship under conditions of normal use and service
for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement, repair or
refund of any such defective device within the warranty period, provided that:
1. inspection by Valcom, Inc. indicates the validity of the claim,
2. the defect is not the result of damage, misuse, or negligence after the original shipment,
3. the product has not been altered in any way or repaired by others and that factory sealed units are unopened (A service
4. freight charges for the return of products to Valcom are prepaid,
5. all units ‘out of warranty’ are subject to a service charge. The service charge will cover minor repairs (Major repairs will be
This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Valcom, Inc. be liable
for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the
purchase, operation, or use of the product.
This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the
carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the
F.O.B. point.
Headquarters: In Canada
Valcom, Inc. CMX Corporation
5614 Hollins Road 35 Van Kirk Drive #11 and 12
Roanoke, VA 24019-5056 Brampton, Ontario L7A1A5
Phone: (540) 563-2000 Phone: (905) 456-1072
FAX: (540) 362-9800 FAX: (905) 456-2269
charge plus parts and labor will be applied to units defaced or physically damaged),
subject to additional charges for parts and labor).
2