Valcom IP Solutions VIP-411-DS User Manual

Issue 1

Issue 1

VIP-411-DS

IP ONE-WAY SURFACE MOUNT SPEAKER/CLOCK ASSEMBLY

INTRODUCTION

The VIP-411-DS One-Way IP Wall Speaker with
Clock enables voice access to a single zone of
one-way paging over an IP-based LAN/WAN. This
allows a page zone extension anywhere on the
network. The speaker level is electrically adjusted
during set up. Clock synchronization is initiated via
connection to a factory preprogrammed time server.
The enclosure is made of steel with a durable gray
powder coated finish. The color of the enclosure
can easily be changed to match any decor. A
detachable black clothe grille is included. Power is
provided to the VIP-411-DS via a Power over an
Ethernet switch meeting the 802.3af specification.

SPECIFICATIONS

Access Methods

• PBX, FXO Port w/VIP-811

• POTS telephone set w/VIP-811

• PBX, FXS Port w/VIP-821

• Valcom M Cast Page Group

• SIP – enabled telephone system

Features

• RJ-45 network connection

• 802.3af compliant

• High Efficiency Class-D Amplifier

INSTALLATION

FCC Information

This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses and can radiate radio
frequency energy and if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case the
user will be required to correct the interference at
his own expense.

1 947647

DIMENSIONS/WEIGHT

• 14.90” H x 12.40” W x 4.67” D
(37.85cm x 31.50cm W x 11.86cm D)

• Weight: 4.25 LBS (1.91 kg)

Environment

Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating

Precautionary Designations

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: To reduce the risk of electric shock,

Ref er serv icing to qua lified s ervice per sonne l.

Packing List

Qty. Item

1 VIP-411-DS
1 VSP Document
1 RJ-45 Patch Cable

Do not remove cover.

No user serviceable parts inside.

This symbol indicates that dangerous
voltage constituting a risk of electric
sho ck is pr esent wit hin this un it.

This symb ol indicates tha t there are
imp ortan t ope rating a nd main tenan ce
inst ructio ns in th e literat ure ac com panying
this unit.

MOUNTING

Remove the screw holding the mounting bracket to
the enclosure. Mount the bracket using appropriate
hardware such as #8 pan head crews. After
making the required connections, reattach the
enclosure to the mounting bracket

Network Connection

The VIP-411-DS has one CAT-5 RJ-45 network
connector on the rear panel. Use the supplied
CAT-5 patch cable to connect the VIP-411-DS to
an Ethernet switch. (See Figure 1)

Figure 1. Connections

TECHNICAL ASSISTANCE

When trouble is reported, verify power is being
supplied to the unit and there are no broken
connections. If a spare unit is available, substitute
a spare unit for the suspected defective unit.

Assistance in troubleshooting is available from the
factory. Call [phone] and press 1 for
Technical Support or via email at
[e-mail]

When requesting assistance, you should include all
available information. It is strongly suggested that
you go to the web site and follow the trouble
resolution procedure at http://voip.valcom.com.

Valcom equipment is not field repairable. Valcom,
Inc. maintains service facilities in Roanoke, VA.
Should repairs be necessary, attach a tag to the
unit clearly stating your company name, address,
phone number, contact person and the nature of
the problem. Send the unit to:

Valcom, Inc.

Repair & Return Dept.

5614 Hollins Road

Roanoke, Va. 24019-5056

VALCOM LIMITED WARRANTY
Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of normal use and service
for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement, repair or
refund of any such defective device within the warranty period, provided that:

1. inspection by Valcom, Inc. indicates the validity of the claim;

2. the defect is not the result of damage, misuse or negligence after the original shipment;
3 the product has not been altered in any way or repaired by others and that factory sealed units are unopened (a service
charge plus parts and labor will be applied to units defaced or physically damaged);

4. freight charges for the return of products to Valcom are prepaid;
5 all units ‘out of warranty’ are subject to a service charge. The service charge will cover minor repairs (major repairs will
be subject to addition charges for parts and labor).

This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Valcom, Inc. be liable for any
anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase,
operation or use of the product.

This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier
should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.

Headquarters

Valcom, Inc.

5614 Hollins Road

Roanoke, VA 24019-5056

Phone: [phone]

Fax: [phone]

2 947647