Valco Baby RAD User Manual

Product Reference Guide

Read and follow the instructions contained within carefully before use. Retain this guide in a
safe and easily accessible place for future reference.

Drawings, pictures and specifications contained in this manual are for illustration purposes only – actual

product may vary. VALCO BABY reserves the right to alter any specification(s), colour and/or features without

prior notice or incurring any obligation to similarly alter products previously purchased.

Thank you for purchasing a quality VALCO product. Due to our policy of continuous product
development, this model is constantly evolving. It is possible that some features or procedures
outlined here have changed since this document was written. If you are unsure of any procedure
outlined here please contact the store from which you purchased it to obtain the most up to date
information, or contact us via the internet. See relevant web contact addresses on the back page.

Assembling / Opening your stroller

Remove the stroller from the carton and dispose of all packaging immediately. The rear wheels, front bar and hood all need to
be installed prior to use.

1. Release the frame locking strap

by simultaneously pressing the
two buckle sides in a pincer
motion.

Wheels and brakes

1. Lift the handle until you hear

the frame lock into the open
position.

1. Line up the rear wheel/brake

assembly so that the brake bar
is facing AWAY from the
stroller.

2. Lift the rear assembly inserting

the frame tubes and continuing
until the assembly is securely
locked into place.

1. line the rear wheel pin with the

rear axle housing

1. Insert the wheel pin into the

housing.

2. Release the wheel lock and insert

the heel as far as it can go.

ALWAYS test that the wheel is secured

in the housing

1. Press down on the brake lever

to simultaneously engage the
brake in both wheels.

2. To release, simply lift the lever

with you foot.

ALWAYS test that the brakes are

fully engaged by pushing the stroller
forward and backward.

Front wheel operation

The wheels on your RAD stroller can swivel through 3600 or be fixed in
position:

1. To fix your wheel in position, turn each dial lock so that the centre

line is VERTICAL.

2. To release your locked wheel, turn each dial lock so that the centre

line is HORIZONTAL

ALWAYS ensure that BOTH wheels are set to the same action.

IMPORTANT WARNING: Always test that the wheels and/or brakes are securely engaged before use.