Vaddio ZoomSHOT WallVIEW SR User Manual
Installation and User Guide
VADDIO™ ZOOMSHOT™ WALLVIEW™ SR
High Definition Point of View Camera System with 19X Optical Zoom
Model Number 999-6918-000 (North America)
Model Number 999-6918-001 (International)
© 2014 Vaddio - All Rights Reserved. ZoomSHOT WallVIEW SR - Document Number 342-0651 Rev B
Zoom SHOT WallVIEW SR
TABLE OF CONTENTS
Overview .................................................................................................................................................................... 3
Unpacking: ................................................................................................................................................................. 4
Front View with Feature Call-outs .......................................................................................................................... 4
Image: ZoomSHOT HD PTZ Camera ............................................................................................................... 4
Rear Panel Connections with Feature Call-outs .................................................................................................... 5
Image: ZoomSHOT HD Camera ....................................................................................................................... 5
Quick-Connect SR Interface ...................................................................................................................................... 6
Image: Rear Panel with Feature Call-outs ........................................................................................................ 6
First Time Set-up: ...................................................................................................................................................... 6
Step By Step Installation Instructions: ................................................................................................................... 7
Image: Basic Wiring Configuration .................................................................................................................... 8
Compliance and CE Declaration of Conformity - ZoomSHOT .................................................................................. 9
Warranty Information ............................................................................................................................................... 10
ZoomSHOT WallVIEW SR General Specifications: ............................................................................................ 11
Appendix 1: Pin-outs for ZoomSHOT Camera ....................................................................................................... 12
Table EZCamera Power & HD Video RJ-45 Connector Pin-outs .................................................................... 12
Appendix 2: Pin-outs for Quick-Connect SR Interface ........................................................................................... 12
Table: DE-15 - YPbPr Pin-Out ........................................................................................................................ 12
Communication Specification .................................................................................................................................. 13
ZoomSHOT Command List (1/2) ...................................................................................................................... 13
ZoomSHOT Command List (2/2) ...................................................................................................................... 14
ZoomSHOT Inquiry List (1/1) ........................................................................................................................... 15
ZoomSHOT WallVIEW SR System Document Number 342-0651 Rev B Page 2 of 16
Zoom SHOT WallVIEW SR
prop
O
VERVIEW
:
The Vaddio ZoomSHOT HD camera produces amazing results for
small, medium and large room applications. Anywhere that a Pointof-View or stationary camera can be used alone or in conjunction
with a Vaddio PTZ camera to simplify camera coverage and preset
positioning, the ZoomSHOT is the answer.
Essentially, the ZoomSHOT is a low cost pan/tilt/zoom camera,
where the pan and tilt are adjusted manually. However, unlike
security-type stationary cameras, the ZoomSHOT is equipped with a
19X optical power zoom lens that produces a horizontal field of view
ranging from 58º on the wide end to 3.1º on the tele end in a HD 16:9
format.
ZoomSHOT HD is a camera with a unique pedigree. Designed from
the ground up, this HD camera uses the Vaddio EZCamera™ Cat-5
wiring standard for video, power and control. Using HSDS™ (high
speed differential) video outputs over Cat-5 cable, the ZoomSHOT
sports a wide range of video resolutions that are selectable from the
Image: ZoomSHOT HD Camera
rear panel; from 480p/59.94-YPbPr up to and including 1080p/60.
The HSDS processing allows delivery of the HD video signals up to
150’ (45.72m).
Choose between three (3) IR frequencies for the Vaddio IR Shot
Commander to allow multiple cameras to be locally IR controlled with
a single remote control. The ZoomSHOT also has an OSD (on
screen display) for easy set-up and basic image control that’s
accessible with the IR remote. Up to six (6) camera zoom presets
can be programmed and recalled via the remote or RS-232 (up to 16
zoom presets with RS-232). IR signal forwarding is also included.
ZoomSHOT is paired with the tried-and-true Quick-Connect SR
Interface in this package which represents a super-high value and a
very low price. So breathe easy, and try a ZoomSHOT today!
Image: ZoomSHOT Rear Panel
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors with the power supply provided. The use of a power supply, other than the one provided, or
outdoor operation has not been tested and could damage the device and/or create a potentially unsafe operating
condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or
damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of
electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
Use only the power supply provided with the system. Use of any unauthorized
power supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connecti ons which
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS (high
speed differential) signals. For best results please use standard RJ-45 connectors and test all
cables for
er pin-outsprior to use and connection to Vaddio product.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
ZoomSHOT WallVIEW SR System Document Number 342-0651 Rev B Page 3 of 16
Zoom SHOT WallVIEW SR
U
NPACKING
Carefully remove the product and all of the included parts from the packaging.
Identify the following parts for each camera:
ZoomSHOT WallVIEW SR Camera System (North America):
Part Number: 999-6918-000
One (1) ZoomSHOT HD Camera (998-6918-000)
One (1) Vaddio IR SHOT Commander Remote
One (1) Quick-Connect SR Interface
One (1) 3-Position Phoenix-type Connector for IR Forwarding
One (1) 24 VDC, 2.0 A Power Supply with Power Cord for North America
One (1) Thin Profile Wall Mount with Mounting Hardware
One (1) EZCamera™ Control Adapter (RJ-45-F to DB-9-F)
Documentation
ZoomSHOT WallVIEW SR Camera System (International):
Part Number: 999-6918-001
One (1) ZoomSHOT HD Camera (998-6918-000)
One (1) Vaddio IR SHOT Commander Remote
One (1) Quick-Connect SR Interface
One (1) 3-Position Phoenix-type Connector for IR Forwarding
One (1) 24 VDC, 2.0 A Power Supply
One (1) Euro Power Cable
One (1) UK Power Cable
One (1) Thin Profile Wall Mount with Mounting Hardware
One (1) EZCamera™ Control Adapter (RJ-45-F to DB-9-F)
Documentation
Front View with Feature Call-outs
Image: ZoomSHOT HD PTZ Camera
1) Lens: 19X Optical Zoom Lens
2) IR Sensor and Power LED: The IR sensor for the IR Shot Commander Remote is located here. In a
separate opening, a blue LED power light and a red LED tally resides (turns purple on boot up).
3) The Yoke: For manual pan and tilt. Tilt range is ± 30° and Pan is limited to the service loop of the cabling.
4) The Aluminum Base and Steel Cylindrical Body: Please don’t drop it on your foot, it’s fairly substantial.
5) Logo: Really Cool Logo Badge (RCLB). The RCLB is affixed to the base in a recessed ovoid area.
:
①
②
③
④
⑤
ZoomSHOT WallVIEW SR System Document Number 342-0651 Rev B Page 4 of 16
Zoom SHOT WallVIEW SR
Rear Panel Connections with Feature Call-outs
Image: ZoomSHOT HD Camera
②
①
④
③
1) RS-232 & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR
signaling received by the front IR receiver, which can be transmitted to third party devices.
2) EZ Power/Video Port:
RJ-45 connector is only used with the Quick-Connect SR, Quick-Connect DVI-D/HDMI SR Interface, Quick-
This
Connect USB and USB Mini Interfaces to supply power and return HSDS (differential) video from the camera
over Cat-5 cable up to distance of 150’ (45.72m).
3) Dip Switch Settings:
Settings for IR remote frequency, IR receiver on/off, image flip, test bars and defaults can be configured on these
switches. See the Switch Settings page for additional information. The dip switch settings are as follows:
Dip Switch Function
1 Up = IR1, Down = IR2
2 Up = IR 1 or 2, Down = IR3
3 Up=IR ON, Down = IR OFF
4 Up = Normal Image, Down = Image Flip
5 Test Bars
6 Update Position - Leave UP unless updating firmware
All Down Reset to Defaults - with power cycle
4) HD Video Select:
A
rotary switch allows the user to choose the component HD output video resolution and format. See the HD
Video Select Rotary Switch Settings are as follows:
Rotary
0
1 1080i/59.94 9 --
2 1080p/59.94 A --
3 -- B --
4 720p/50 C --
5 1080i/50 D --
6 1080p/50 E 1080p/29.97
7 480p/59.94 F 1080p/25
Resolutions
720p/59.94 8
Rotary
Resolutions
576p/50
ZoomSHOT WallVIEW SR System Document Number 342-0651 Rev B Page 5 of 16
Loading...