VADDIO ZoomShot 999-6920-000, ZoomShot 999-6920-001 Installation And User Manual
Installation and User Guide
VADDIO™ ZOOMSHOT™ 20 HD POV CAMERA
High Definition Camera System with 20X Optical Zoom for
use with the
Model Number 999-6920-000 (North America)
Model Number 999-6920-001 (International)
AV BRIDGE MATRIX PRO
AV Bridge MATRIX PRO (Sold Separately)
ZoomSHOT 20 Camera for AV Bridge MATRIX PRO, Document Number 342-0962 Rev A Page 1 of 18
ZoomSHOT 20 for AV Bridge MATRIX PRO
Inside Front Cover - Blank, Mostly
ZoomSHOT 20 System for AV Bridge MARTIX PRO, Document Number 342-0962 Rev A Page 2 of 18
ZoomSHOT 20 for AV Bridge MATRIX PRO
TABLE OF CONTENTS
Overview .................................................................................................................................................................... 4
Unpacking .................................................................................................................................................................. 5
Purpose of this Manual .......................................................................................................................................... 5
ZoomSHOT 20 Front View with Feature Call-outs ................................................................................................ 5
Image: ZoomSHOT 20 HD PTZ Camera ............................................................................................ ............. 5
Rear Panel Connections with Callouts................................................................................................................... 6
Image: ZoomSHOT 20 HD Camera .................................................................................................................. 6
Table: ZoomSHOT 20 DIP Switch Settings ...................................................................................................... 6
Table: ZoomSHOT 20 HD VIDEO Selections ................................................................................................... 6
Diagram: Basic Wiring Configuration with MATRIX PRO ................................................................................. 7
ZoomSHOT 20 First Time Set-up: ............................................................................................................................. 7
Step By Step Installation Instructions: ................................................................................................................... 8
Vaddio IR SHOT Commander Remote ..................................................................................................................... 9
Image: Vaddio IR SHOT Commander Hand-held IR remote ............................................................................ 9
Table: ZoomSHOT 20 OSD Menu Structure .......................................................................................................... 10
Compliance and CE Declaration of Conformity - ZoomSHOT 20 ........................................................................... 12
Warranty Information ............................................................................................................................................... 13
General Specifications ............................................................................................................................................. 14
Appendix 1: Pin-outs for ZoomSHOT 20 Camera .................................................................................................. 14
Table: EZ-POWER VIDEO RJ-45 Connector Pin-outs ................................................................................... 14
Table: ZoomSHOT 20 Camera RS-232 Port .................................................................................................. 14
Communication Specification .................................................................................................................................. 15
ZoomSHOT 20 Command List (1/2) ................................................................................................................. 15
ZoomSHOT 20 Command List (2/2) ................................................................................................................. 16
ZoomSHOT 20 Inquiry List (1/1) ...................................................................................................................... 17
ZoomSHOT 20 System for AV Bridge MARTIX PRO, Document Number 342-0962 Rev A Page 3 of 18
ZoomSHOT 20 for AV Bridge MATRIX PRO
O
VERVIEW
:
The Vaddio ZoomSHOT 20 camera system produces amazing resu lts
for small, medium and large room applications. Anywhere that a
Point-of-View or stationary camera can be used alone or in
conjunction with a Vaddio PTZ camera, to simplify camera coverage
and preset positioning, the ZoomSHOT 20 is the answer. This
ZoomSHOT 20 system is specifically packaged for use with the AV
Bridge MATRIX PRO and takes advantage of the three (3) built-in
Quick-Connect systems with in the MATRIX PRO.
Essentially, the ZoomSHOT 20 camera is a low cost pan/tilt/zoom
camera, where the pan and tilt are adjusted manually. However,
unlike fixed-lens stationary cameras, the ZoomSHOT 20 is equipped
with a 20X optical power zoom lens that produces a horizontal field of
view ranging from 63º on the wide end to 3.47º on the tele end in a HD
16:9 format.
ZoomSHOT 20 was designed from the ground up and uses the Vaddio
EZCamera™ Cat-5 wiring standard for video, power and co ntrol. The
ZoomSHOT 20 supports a wide range of HD video resolutions that are
selectable on the rear panel up to the native 1080p/60 resolution. This
camera can deliver HD video signals, power and control up to 150’
(45.72m) on Cat-5/5e/6 cable.
The EZ-POWER VIDEO jack, color coded orange, ca rries power from
the MATRIX PRO to the camera and returns HSDS™ (high speed
differential) HD video over the same Cat-5 cable. The RS-232 jack,
color coded blue, provides bi-directional control to and from the
camera.
Intended Use:
Before operating the device, please read
the entire manual thoroughly. The
system was designed, built and tested for
use indoors with the power supply
provided. Outdoor operation or use of a
different power supply has not been
tested and could damage the device
and/or create a potentially unsafe
operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermitten t connections which
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS (high
speed differential) signals. For best results please use real RJ-45 connectors with real RJ-45
crimpers and test all cables for proper pin-outs prior to connection to Vaddio product.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
ZoomSHOT 20 System for AV Bridge MARTIX PRO, Document Number 342-0962 Rev A Page 4 of 18
ZoomSHOT 20 for AV Bridge MATRIX PRO
U
NPACKING
Carefully remove the product and all of the included parts from the packaging.
ZoomSHOT 20 System for use with the AV Bridge MATRIX PRO (North America):
Part Number: 999-6920-000
One (1) ZoomSHOT 20, HD POV Camera (998-6920-000)
One (1) Vaddio IR Shot Commander Remote
One (1) Thin Profile Wall Mount with Mounting Hardware
Quick-Start Guide
Notes:
No other peripherals are included.
MATRIX PRO is Sold Separately.
Full manuals are downloaded from support.vaddio.com
ZoomSHOT 20 System for use with the AV Bridge MATRIX PRO (Int’l):
Part Number: 999-6920-000
One (1) ZoomSHOT 20, HD POV Camera (998-6920-000)
One (1) Vaddio IR Shot Commander Remote (No Batteries)
One (1) Thin Profile Wall Mount with Mounting Hardware
Quick-Start Guide
Notes:
No other peripherals are included.
MATRIX PRO is Sold Separately.
Full manuals are downloaded from support.vaddio.com
Purpose of this Manual
This manual will concentrate on the ZoomSHOT 20, how it is connected to the MATRIX PRO, the key features, the
specifications, etc…, so it may seem a little brief at first, but brief is good, don’t you think? Please use this manual
in conjunction with the MATRIX PRO manual for the rest of the story. Now, for the easy part.
ZoomSHOT 20 Front View with Feature Call-outs
Image: ZoomSHOT 20 HD PTZ Camera
1) Lens: 19X Optical Zoom Lens
②
①
③
④
⑤
2) IR Sensor and Power/Tally LED: The IR sensor for the IR SHOT Commander Remote is located here. In a
separate opening, a blue LED power light and a red LED tally resides (it turns purple on boot up too).
3) The Yoke: For manual pan and tilt. Tilt range is ± 30° and Pan is limited to the service loop of the cabling.
4) The Aluminum Base and Steel Cylindrical Body: Please don’t drop it on your foot, it’s fairly substantial.
5) Logo: Really Cool Logo Badge (RCLB). The RCLB is affixed to the base in a recessed ovoid area.
ZoomSHOT 20 System for AV Bridge MARTIX PRO, Document Number 342-0962 Rev A Page 5 of 18
ZoomSHOT 20 for AV Bridge MATRIX PRO
Rear Panel Connections with Callouts
Image: ZoomSHOT 20 HD Camera
①
②
③
④
1) RS-232 (Color Coded Blue): The RS-232 RJ-45 accepts modified VISCA protocol for camera control.
2) EZ-POWER VIDEO Port (Color Coded Orange): This RJ-45 connector is only used with the Quick-Connect
SR, Quick-Connect DVI-D/HDMI SR Interface, Quick-Connect USB and USB Mini Interfaces to supply power and
return HSDS (differential) video from the camera over Cat-5/5e/6 cable up to distance of 150’ (45.72m).
3) ZoomSHOT 20 DIP Switch Settings: Settings for IR remote frequency, IR receiver on/off, image flip, test bars
and Defaults can be configured on these switches. See the Switch Settings page for additional information. The
dip switch settings are as follows:
Table: ZoomSHOT 20 DIP Switch Settings
DIP Switch Function
1 Up = IR1, Down = IR2
2 Up = IR 1 or 2, Down = IR3
3 Up=IR ON, Down = IR OFF
4 Up = Normal Image, Down = Image Flip
5 Not Used
6 Not Used
All Down Reset to Defaults - with power cycle
4) HD Video Select:
A rotary switch allows the user to choose the component HD output video resolution and format. After setting or
changing the resolution, reboot the camera to ensure proper ope ration. Simply set the rotary switch to an assigned
position to output video. The HD Video Select Rotary Switch Settings are as follows:
Table: ZoomSHOT 20 HD VIDEO Selections
Rotary
0
1 1080i/59.94 9 -2 1080p/59.94 A -3 720p/60 B -4 1080i/60 C -5 1080p/60 D -6 720p/50 E 1080p/30
7 1080i/50 F 1080p/25
Resolutions
720p/59.94 8 1080p/50
Rotary
Resolutions
Notes:
Set the rotary switch to an assigned position. If put on an unassigned position, then 720p/60 will be displayed.
Point the notch in
the switch stem to
assign the rotary
position
ZoomSHOT 20 System for AV Bridge MARTIX PRO, Document Number 342-0962 Rev A Page 6 of 18
Loading...