VADDIO ZOOMSHOT 20, 999-6919-101, ZOOMSHOT QMINI, 999-6919-100 Installation And User Manual

Download

Installation and User Guide

VADDIO™ ZOOMSHOT 20™ 20 QMINI SYSTEM

High Definition Camera System with 20X Optical Zoom featuring the Quick-Connect USB Mini Interface

Model Number 999-6920-400 (North America) Model Number 999-6920-401 (International)

Quick-Connect USB Mini System Interface

ZoomSHOT 20 QMini System

TABLE OF CONTENTS

Overview ................................................................................................................................................................................................................. 3

Unpacking ............................................................................................................................................................................................................... 4

Front View with Feature Call-outs ...................................................................................................................................................................... 4

Image: ZoomSHOT 20 HD PTZ Camera ..................................................................................................................................................... 4

Rear Panel Connections with Feature Call-outs ................................................................................................................................................. 5

Image: ZoomSHOT 20 HD Camera .............................................................................................................................................................. 5

Table: ZoomSHOT 20 DIP Switch Settings .................................................................................................................................................. 5

Table: WideSHOT HD VIDEO Selections ..................................................................................................................................................... 5

IR SHOT Commander Remote ............................................................................................................................................................................... 6

Image: Vaddio IR SHOT Commander Hand-held IR Remote ....................................................................................................................... 6

Table: ZoomSHOT 20 OSD Menu Structure ......................................................................................................................................................... 7

Quick-Connect USB Mini ........................................................................................................................................................................................ 9

Image: Front Panel with Feature Call-outs ................................................................................................................................................... 9

Image: USB Mini Top Panel Connections ..................................................................................................................................................... 9

Diagram: Basic System Configuration ZoomSHOT 20 with USB Mini ........................................................................................................ 10

First Time Set-up: .................................................................................................................................................................................................. 10

STEP BY STEP: ZoomSHOT 20 QMini System Installation Instructions ....................................................................................................... 11

Diagrams: Connecting the USB Mini ........................................................................................................................................................... 11

Controlling the WideSHOT QMini System ........................................................................................................................................................ 12

USB Mini Details ............................................................................................................................................................................................... 12

Compatibility .......................................................................................................................................................................................................... 13

Table: Supported UVC Resolutions ............................................................................................................................................................ 13

Internal Web Pages and Control ........................................................................................................................................................................... 14

USB Mini Web Page Tour ................................................................................................................................................................................ 14

Screen Shot: Login ...................................................................................................................................................................................... 14

Screen Shot: Camera Control Page - No Camera Detected ...................................................................................................................... 14

Screen Shot: Camera Control Page and User Menu for ZoomSHOT 20 ................................................................................................... 15

Screen Shot: Admin Log-in ......................................................................................................................................................................... 16

Screen Shot: Admin Menu - Camera Settings Page ................................................................................................................................... 17

Screen Shot: Admin Menu - Streaming Page ............................................................................................................................................. 18

Screen Shot: Admin Menu - Room Labels .................................................................................................................................................. 19

Screen Shot: Admin Menu - Networking ..................................................................................................................................................... 19

Screen Shot: Admin Menu - Security .......................................................................................................................................................... 20

Screen Shot: Ad

Screen Shot: Admin Menu - System Menu ................................................................................................................................................. 21

Screen Shot: Admin Menu - Update Confirmation ...................................................................................................................................... 21

Screen Shot: Admin Menu - Update in Progress ........................................................................................................................................ 22

Screen Shot: Admin Menu - Help................................................................................................................................................................ 22

Connecting the USB Mini and ZoomSHOT 20 to the PC and Program of Choice ................................................................................................ 23

Skype Example: ................................................................................................................................................................................................ 23

VLC Media Player Example: ............................................................................................................................................................................. 23

General Specifications .......................................................................................................................................................................................... 24

Compliance and CE Declaration of Conformity for ZoomSHOT 20 ...................................................................................................................... 25

Compliance and CE Declaration of Conformity for Quick-Connect ...................................................................................................................... 26

Warranty Information ............................................................................................................................................................................................. 27

Appendix 1: Pin-outs for ZoomSHOT 20 Camera and Quick-Connect USB Mini ................................................................................................ 28

Table: EZ-POWER VIDEO RJ-45 Connector Pin-outs ................................................................................. Error! Bookmark not defined.

Table: ZoomSHOT 20 Camera RS-232 Port .............................................................................................................................................. 28

System Notes: ....................................................................................................................................................................................................... 29

min Menu - Diagnostics .................................................................................................................................................... 20

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 2 of 30

ZoomSHOT 20 QMini System

prop

VERVIEW

The Vaddio ZoomSHOT 20 20 HD camera produces amazing results for small, medium and large room applications. Anywhere that a point-of-view or stationary camera is used alone, or in conjunction with a Vaddio PTZ camera to simplify camera coverage and preset positioning, the ZoomSHOT 20 is the answer.

Essentially, the ZoomSHOT 20 is a low cost pan/tilt/zoom camera, where the pan and tilt are adjusted manually. However, unlike fixed lens security-type stationary cameras, the ZoomSHOT 20 is equipped with a 20X optical power zoom lens that produces a horizontal field of view ranging from 63º on the wide end to 3.47º on the tele end in a HD 16:9 format.

Choose between three (3) IR frequencies for the Vaddio IR SHOT Commander to allow multiple cameras to be locally IR controlled with a single remote control. The ZoomSHOT 20 also has an OSD (on screen display) for easy set-up and basic image control that is accessible with the IR remote.

The USB Mini is the latest product in the popular Vaddio Qui ck-Connect produ ct line. Designed to answer the demands of customers and integrators who required simple and effective USB 2.0, 720p/30 streaming and capture capabilities without the need for local analog or digital video outputs. The USB Mini uses UVC (Universal Video Class) drivers, so whatever resolution the UC application needs, the USB Mini will auto negotiate.

As with all Quick-Connect interfaces, the USB Mini powers the camera, returns HSDS™ (differential) video with connectivity distances up to 150’ using the Vaddio standard two (2) Cat-5 wiring platform. The USB Mini will process Vaddio HSDS video generated by the camera, and use it to create UVC files for use by USB 2.0 video streaming or capture applications.

The USB Mini also offers easy mounting either on-wall or under-table with an integrated mounting tab similar to the style used on the Vaddio EZCamera™ Interface Module or EZIM™. This provides the end user or integra tor many possibilities for mounting in easily accessible locations, as requirements dictate.

ZoomSHOT 20 paired with the Quick-Connect USB Mini Interface in this package represents an outstanding value for pro installations at a great price. So breathe easy, and try a ZoomSHOT 20 with a USB Mini today!

Intended Use:

Before operating the device, please read the entire manual thoroughly. The system was designed, built and tested for use indoors with the power supply provided. The use of a power sup ply, other than the one provided, or outdoor operation has not been tested may result in damage or create a potentially unsafe operating condition.

Important Safeguards:

Read and understand all instructions before using. Do not operate any device if it has been drop ped o r damage d. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.

Use only the power supply provided with the system. Use of any unauthorized or DC extended power supplies will void any and all warranties.

Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not work well for professional installations and can be the cause of intermittent connecti ons, which can result in the RS-232 control line failing and locking up, and/or compromising the HSDS (hi ghspeed differential) signals. For best results, please use standard RJ-45 connectors and tes t all cables for

er pin-outsprior to use and connection to Vaddio product.

Save These Instructions:

The information contained in this manual will help you install and operate your product. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from

www.vaddio.com free of charge.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 3 of 30

ZoomSHOT 20 QMini System

NPACKING

Carefully remove the product and all of the included parts from the packaging. Identify the following parts for each camera:

ZoomSHOT 20 QMini Camera System (North America)

Part Number: 999-6920-400

 One (1) ZoomSHOT 20 HD Camera (998-6920-000)  One (1) IR SHOT Commander Remote Control  One (1) IR SHOT Commander One-sheet Guide  One (1) Thin Profile Wall Mount for ZoomSHOT 20/WideSHOT  One (1) Mounting Hardware Kit  One (1) Quick-Connect USB Mini Interface (999-1105-039)  One (1) 24 VDC, 2.08 Amp Power Supply with North American Power Cord  One (1) 6’ (1.83m) USB 2.0 Cable  Quick Start Guide

NOTE: Full manuals are now downloaded fr om support.vaddio.com

ZoomSHOT 20 QMini Camera System (International)

Part Number: 999-6920-401

 One (1) ZoomSHOT 20 HD Camera (998-6920-000)  One (1) IR SHOT Commander Remote (Int’l pack-out)  One (1) IR SHOT Commander One-sheet Guide  One (1) Thin Profile Wall Mount for ZoomSHOT 20/WideSHOT  One (1) Mounting Hardware Kit  One (1) Quick-Connect USB Mini Interface (999-1105-039)  One (1) 24 VDC, 2.08 Amp Power Supply  One (1) 802-2435 Euro Power Cable  One (1) UK Power Cable  One (1) 6’ (1.83m) USB 2.0 Cable  Quick Start Guide

NOTE: Full manuals are now downloaded fr om support.vaddio.com

Front View with Feature Call-outs

Image: ZoomSHOT 20 HD PTZ Camera

①

②

③

④

⑤

1) Lens: 20X Optical Zoom Lens

2) IR Sensor and Power LED: The IR sensor for the IR SHOT Commander Remote is located here. In a

separate opening, a blue LED power light and a red LED tally resides (turns purple on boot up).

3) The Yoke: The yoke is used for manual pan and tilt. The tilt range is ± 30° and Pan is limited to the service

loop of the cabling.

4) The Aluminum Base and Steel Cylindrical Body: Please do not drop it on your foot, it‘s fairly substantial.

5) Really Cool Logo Badge (RCLB): The RCLB is on the base in a recessed ovoid area.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 4 of 30

ZoomSHOT 20 QMini System

Rear Panel Connections with Feature Call-outs

Image: ZoomSHOT 20 HD Camera

①

②

③

④

1) RS-232 (Color Coded Blue): The RS-232 port accepts serial control protocol for camera control, as well as automatically identifies the camera to the Quick-Connect USB Mini and Quick-Connect USB Interfaces so the correct software is loaded and ready for the ZoomSHOT 20.

2) EZ-POWER VIDEO Port (Color Coded Orange): This RJ-45 connector is only used with the Quick-Connect SR, Quick-Connect DVI-D/HDMI SR Interface, Quick-Connect USB and USB Mini Interfaces to supply power and return HSDS (differential) video from the camera over Cat-5 cable up to distance of 150’ (45.72m).

3) Dip Switch Settings: Settings for IR remote frequency, IR receiver on/off, image flip and defaults can be configured on these switches. See the Switch Settings page for additional information. The DIP switch settings are as follows:

Table: ZoomSHOT 20 DIP Switch Settings

DIP Switch Function

1 Up = IR1, Down = IR2 2 Up = IR 1 or 2, Down = IR3 3 Up=IR ON, Down = IR OFF 4 Up = Normal Image, Down = Image Flip 5 Test Bars 6 Update Position - Leave UP unless updating firmware

All Down Reset to Defaults - with power cycle

4) HD Video Select: A rotary switch allows the user to choose the video resolution and format. The HD Video Select rotary switch settings are as follows:

Table: WideSHOT HD VIDEO Selections

Rotary

1 1080i/59.94 9 -2 1080p/59.94 A -3 -- B -4 720p/50 C -5 1080i/50 D -6 1080p/50 E 1080p/29.97 7 480p/59.94 F 1080p/25

Notes:

1) For USB 2.0 video streaming, use position “0” (720p/59.94) for best results.

2) Set the rotary switch to an assigned position. A medium grey privacy mask is displayed on unassigned positions.

Resolutions

720p/59.94 (USB 2.0) 8 576p/50

Rotary

Resolutions

Point the notch in the switch stem to assign the rotary position.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 5 of 30

ZoomSHOT 20 QMini System

IR SHOT C

OMMANDER REMOTE

The Vaddio IR SHOT Commander works with the Vaddio ZoomSHOT 20 and WideSHOT camera systems and is compatible with all the Vaddio PTZ cameras. All ZoomSHOT 20 and WideSHOT Camera Systems are shipped with this IR remote.

Image: Vaddio IR SHOT Commander Hand-held IR Remote

(Top View)

ZOOM OUT ZOOM I P-STORE IR 1

Red LED indicates IR transmission and the brightness indicates battery strength

PRESET

OSD: On Screen Display Menu

Arrow Keys X 4

 Pan Left, Pan Right,  Tilt Up, Tilt Down  Menu Navigation

Power On/Off Camera Standby

OK, Enter, Select and Camera Home

Zoom Camera OUT (wide)

Zoom Camera IN (telephoto)

Preset Button - Setting Presets

 Move the camera into position  Push and hold P-STORE button  Touch buttons 1 or 2 to set Preset

Recalls ZoomSHOT 20 Preset 1 or Preset 2 (zoom position)

*WideSHOT uses a manual lens

Select IR Frequencies (3) Allows up to 3 cameras to be controlled in a room with one (1) IR Remote

Note: Camera dip switches set IR frequency.

IR SHOT Commander - Quick Specs

IR Range Batteries Keys (buttons) Dimensions

L x W x H LED Indicator

Compatible Cameras

20’ to 30’ (6m to 9m) 2 x AAA (Batteries not shipped internationally) 15 Silicone Rubber Keys

4.53” (115mm) x 1.57” (40mm) x 1.1” (28mm)

Red LED illuminates when transmitting IR, brightness indicates battery strength Ships with ZoomSHOT 20 and WideSHOT. Compatible with all Vaddio HD PTZ

cameras (limited function set) and most Sony BRC & EVI cameras.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 6 of 30

ZoomSHOT 20 QMini System

TABLE: ZOOMSHOT 20 OSD MENU STRUCTURE

Use this OSD menu with the IR SHOT Commander to make video adjustments (AWB, COLOR, EXP, etc…) on the HD-20SE Camera.

Menu Controls Modes/Range Default Notes

SSDR OFF OFF Dynamic Range Adjustment ON SSDR 0-15 8* *When Dynamic Range is ON Return Return to Main Menu

WHITE BAL ATW ON Auto White Balance - ON MANUAL> RED 0 - 1000 560 Adjust Red Level BLUE 0 - 1000 480 Adjust Blue Level RETURN< Return to WHITE BAL Menu AWC-SET OUTDOOR Set to Outdoor when room has direct sun light and blue walls INDOOR Set to Indoor when fluorescent lights start to cause color variation in ATW mode MERCURY SODIUM RETURN< Return to Main Menu

BACKLIGHT OFF OFF Default BLC is off WDR> LEVEL (LOW / MED / HIGH) OFF Wide Dynamic Range RETURN< BLC> LEVEL (LOW / MED / HIGH) OFF BOTTOM 1-100 LEFT 1-100 RIGHT 1-100 RETURN< Return to BACKLIGHT Menu HLC> LEVEL (LOW / MED / HIGH) OFF MASK TONE 1-15 RETURN< Return to BACKLIGHT Menu RETURN< Return to Main Menu

INTELLIGENCE OFF Intelligence, motion detection analytics and masking are not processed or used by the

FOCUS MODE AUTO / MANUAL / ONE PUS H AUTO ZOOM TRACK> OFF / TRACK / AUTO TRACK AUTOTRACK ZOOM SPEED> SLOW / MEDIUM / FAST DIGITAL ZOOM> OFF/ON OFF Default is OFF ON>LIMIT X2 - X16 Avoid Digital Zoom if possible RETURN< Return to FOCUS Menu Zoom POS INIT> OFF/AUTO Zoom position initialization MANUAL> POS INIT 1X - 20X 1X Sets INIT Zoom Position RETURN< Return to FOCUS Menu USER PRESET> OFF/ON OFF ON > PRESET NO 1-128 1 Zoom Presets PRESET SAVE PRESET CLEAR RETURN< Return to FOCUS Menu LENS INIT MANUAL / AUTO RETURN< Return to Main Menu

EXPOSURE BRIGHTNESS 0-100 50 Brightness Sets Luminance Target IRIS> AUTO AUTO Automatic Gain Control

MANUAL> Closed to F28 Manual Iris RETURN< Return to EXPOSURE Menu

SHUTTER A FLK Use Anti-Flicker when lighting causes color hunting ESC MANUAL> 1/30 - 1/30,000 sec. Shutter Speed RETURN< Return to EXPOSURE Menu AGC OFF / LOW /MED / HIGH LOW MANUAL (OFF)> AGC VALUE 0 - 36dB 0 dB Automatic Gain Control RETURN< SSNR OFF / LOW /MED / HIGH LOW Noise Reduction - Don’t use above Low SENS-UP OFF OFF OFF - Do not Use RETURN< Return to Main Menu

camera; however the OSD menu still works.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 7 of 30

ZoomSHOT 20 QMini System

ZoomSHOT 20 OSD Menu Structure (continued)

Menu Controls Range/Modes Default Notes

SPECIAL DAY/NIGHT> COLOR / B/W / AUTO COLOR Do not use DIS> OFF / ON OFF Digital Image Stabilization - leave off DEFOG OFF / ON / MANUAL/AUTO OFF Do not use COMM ADJUST> BAUD RATE NEVER CHANGE THE BAUD RATE OR THE UART UART

RETURN< Return to SPECIAL Menu

IMAGE ADJUST> H-REV ON / OFF OFF Use Dip Switch on Camera to Flip Image V-REV ON / OFF OFF Use Dip Switch on Camera to Flip Image SHARPNESS ON/OFF ON Picture Detail ON> 0-30 15 RETURN< Return to IMAGE ADJUST Menu MONITOR LCD> GAMMA .0 -1.0 0.50 COLOR LEVEL 0-100 50 RETURN< Return to IMAGE ADJUST Menu USER> GAMMA .0 - 1.0 0.50 COLOR LEVEL 0-100 50 RETURN< Return to IMAGE ADJUST Menu RETURN< Return to Main Menu DISPLAY CAM TITLE ON / OFF OFF ON> A-Z, 1-9 RETURN< Return to DISPLAY Menu CAM ID ON / OFF OFF CAM INFO ON / OFF OFF ZOOM MAG ON/OFF OFF OSD COLOR WHITE WHITE/YELLOW/GREEN/RED/BLUE LANGUAGE

SET LANGUAGE RETURN< Return to Main Menu VIDEO OUT FORM COMPONENT ON / OFF ON Do not change this parameter RETURN< Do not change resolutions here - Use the

RESET EXIT

SETTINGS - Control is lost if these are changed. Factory default reboot will be required.

ENGLISH (ENG, FR, KOR, SP, CHIN, JAP, PORT,

RUS, DUT, ITAL)

Rotary Switch on the back of the camera

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 8 of 30

ZoomSHOT 20 QMini System

UICK-CONNECT

Image: Front Panel with Feature Call-outs

1) USB Port: USB Type-B port for connectivity to streaming or capture computer.

2) Power LED: Indicates presence of 24 VDC power for the Quick-Connect.

The USB Mini will automatically show up as a native USB 2.0 device on the connected computer. If not prompted to allow the device as your primary UVC video source, it may be required to configure it as such in the operating system of the streaming/capture computer.

Image: USB Mini Top Panel Connections

1) Power Connector: 5.5mm x 2.5mm coaxial power jack for use with provided 24 VDC, 2.08 Amp switching

power supply.

2) Mode Switch: White-capped, recessed, momentary tactile push button for switching between USB Streaming and Web Control (Ethernet over USB) modes, as well as a Factory Reset mode. Important configuration and operating note:

a. The USB Mini interface will boot up in UVC streaming video mode. A quick momentary touch will switch

to web control mode and video will no longer pass. This allows the administrator to set up the USB Mini with the embedded web pages and when the administrator is finished, toggle back to UVC streaming mode for the end user. It is highly unlikely that the end user will ever need access to the configuration web pages during use of the USB Mini.

b. For resetting the USB Mini back to factory defaults, push and hold this switch in for approximately 5.0

seconds. The front panel blue LED will blink to indicate factory reset.

3) EZ-POWER VIDEO RJ-45 (Color Coded Orange): Simultaneously sends power to the camera to and ret urns HSDS (differential) video from the camera to generate USB 2.0 (UVC) video for the connected PC.

4) RS-232 Jack (Color Coded Blue): RJ-45 control port for sending serial control to the camera.

5) Mounting Flange: The mounting flange provides for surface mounting the USB Mini (under table or in cable

tray) and easy access to the USB connection for laptop or computer.

USB M

➊

INI

➋

➊

➋

Side VIEW

➌

➍

➎

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 9 of 30

ZoomSHOT 20 QMini System

Diagram: Basic System Configuration ZoomSHOT 20 with USB Mini

Local

Power

24 VDC

◄

HD Video from Camera - Power to Camera

▶

Two (2) Cat-5 Cables

Distance up to 150’ (15.26m)

Serial Control (RS-232)

ZoomSHOT 20

HD Camera

Quick-Connect USB Mini

Rear Panel (above), Front Panel (below)

USB 2.0

Connected

to Front

Panel

USB 2.0

(UVC

Drivers)

Laptop with UC

Application

HD Video (HDMI, DVI or RGBHV)

Extension of PC Video

Room Monitor (Simulated video feed)

IRST TIME SET-UP

The ZoomSHOT 20 is very easy to use and operate. There is documentation at the back of this manual for pin-outs of the connectors on the ZoomSHOT 20 camera and the USB Mini Interface.

Before Installing:

 Choose the camera mounting location while paying close attention to camera

viewing angles, lighting conditions, possible line of site obstructions, and checking for in-wall obstructions where the camera is to be mounted. Always pick a mounting location that will optimize the performance of the camera.

 Please locate the camera to enable easy positioning of the camera body with

the ability to point down and away from the ceiling and a bunch of fluorescent

Image: ZoomSHOT 20 HD Camera with provided Thin Profile Wall Mount

lighting cells. Cameras generally do not like to be swamped with fluorescent light and very few people sit on the ceiling anyway.

 The Thin Profile Wall Mount (right) for the ZoomSHOT 20 can be mounted directly to a 1-gang wall box or can

be mounted using only dry wall anchors.

 For Power/Video and RS-232 signals, use standard Cat-5 cable (568B termination and real RJ-45 connectors)

from the EZ-POWER VIDEO and RS-232 ports on the back of the ZoomSHOT 20 to the Quick-Connect Interface.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 10 of 30

ZoomSHOT 20 QMini System

STEP BY STEP: ZoomSHOT 20 QMini System Installation Instructions STEP 1: After determining the optimum location of the camera, route, mark and test

the two (2) Cat-5 cables from the camera to the USB Mini Interface located at the table. The two Cat-5 cables should feed-through the hole located on the rear flange of the Thin Profile Wall Mount. If the bracket is mounted on a 1-gang wall box, use the screws supplied with the wall box cover plate to attach the Thin Profile Wall Mount. If mounting to the drywall with wall anchors, use two (2) quality wall anchors. The mount provides for easy leveling. Pull the cat-5 cables though the wall and feed the cables through the back of the mount. Level the mount and tighten the mounting screws.

STEP 2: Using the HD VIDEO SELECT rotary switch and CAMERA SETTINGS dip switches on the back of the camera, set up the camera’s output resolution and functional preferences. There are tables on page 6 that identify the choices. Keep these tables handy for future use.

Setting the ZoomSHOT 20 Camera:

 Set the desired HD Resolution with the rotary selection switch. If changing the resolution, always reboot the

camera to ensure proper operation.

Note: Use 720p/59.94 (position “0”) for best results for streaming USB 2.0 (MJPEG).

 Set the IR frequency (1, 2 or 3) of the camera (if it is to respond to the IR remote control).  Set the desired image orientation (normal or flipped).

STEP 3: Follow the wiring diagram for connecting the Cat-5 cables to the ZoomSHOT 20 and USB Mini but read and understand the rest of these instructions especially the next note.

NOTE: Check all Cat-5 cables for continuity in advance of the final connection. Label the

Cat-5 cables. Plugging the EZ-POWER VIDEO cable into the wrong RJ-45 may cause damage to the camera system and void the warranty. For premise cabling, please use real RJ-45 connectors and crimpers. Please do not use pull through or EZ type RJ-45s.

STEP 3a: Connect a Cat-5 cable from the EZ-POWER VIDEO RJ-45 jack of the USB Mini to the EZ- P OWER

VIDEO jack of the Vaddio camera. STEP 3b: Connect a Cat-5 cable from the RS-232 TO CAMERA RJ-45 jack on the USB Mini to the RS-232

serial control port of the Vaddio camera.

Diagrams: Connecting the USB Mini

STEP 5

STEP 3a

Cat-5

STEP 3b

Cat-5

STEP 4: Place the camera onto the camera mount and use the provided ¼”-20 screws to secure the camera to the mount. To dress the cabling, push the extra cable back into the wall opening.

HINT: A small piece of black fabric or felt attached to the back of the mount (wall-side) with a small slit to allow cables through may help the overall dressing of the mount and cables.

STEP 5: Connect the supplied 24 VDC, 2.08 Amp switching power supply to the USB Mini. Plug in the AC power cord to the power supply and connect it to a local power outlet. Verify the blue LED power light on the USB Mini and the blue LED on the Vaddio camera are illuminated.

STEP 6: Connect a USB 2.0, Type-A Male to USB Type-B Male cable from the USB Type-B jack of the USB Mini to the USB 2.0 Type-A port on the laptop or PC.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 11 of 30

ZoomSHOT 20 QMini System

STEP 6

USB 2.0

Cable

STEP 7: For best results, set the camera to 720p/59.94 video resolution by turning

its rotary resolution switch on the back of the camera to the ‘0’ position (at 6:00) with the notch in the rotary switch pointed straight downward.

STEP 8: Using desired third party software, verify UVC stream. Upon applying power to the system, the USB

Mini should show up on the connected computer as a UVC video USB 2.0 peripheral (more on this later). STEP 9: Connect the Vaddio 24 VDC, 2.08 Amp power supply to a power outlet and to the Mini USB Interface.

The USB Mini will initialize and power will travel down the EZ-POWER VIDEO Cat-5 cable to the camera. The camera will boot up and in a few seconds, differential HD video will travel back down the Cat-5 cable to the USB Mini. When an image is available, the camera is ready to accept control information from the IR SHOT Commander.

Controlling the WideSHOT QMini System

 IR R emote: The IR SHOT Commander Remote is the best way to control the camera in real-time. The IR

remote controller can control the camera’s basic functions and enter the OSD (on-screen display) for more advanced controls. The IR remote is the best way to control the camera in real-time.

 RS-232 Control: This control port is used by the USB Mini to ID the attached camera. Using another control

method (joystick or control system) is not necessarily a great idea because the USB Mini will not recognize the camera and it won’t auto-load the control protocols for the camera or serve u p the web pages (see next bullet).

 Built-in Web Server Control: The USB Mini has a built-in web server that auto-loads the control protocols of

the Vaddio camera attached. Camera set-up and controls are available to the administrator of the system from any approved browser on any computer. The system has two modes: Video Streaming Mode and Web Control Mode. While using the Web Control Mode, the image is not available for preview. For this reason, the IR SHOT Commander controlling the camera image through the OSD is the best way to control the camera in real-time.

USB Mini Details

The USB Mini Interface is a Cat-5 camera interface and a USB 2.0 streaming appliance with a built-in webserver for camera set-up and control. The interface uses UV C (Universal Video Cla ss) drivers for USB 2.0 video and do es not require the loading of any other drivers to run on the PC.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 12 of 30

ZoomSHOT 20 QMini System

COMPATIBILITY

The Quick-Connect USB Mini will work with the following web browsers, soft codecs, computer operating systems and media players:

Compatibility - Web Browsers:

1) Internet Explorer (IE 8 and above)

2) Safari (Rev 4 and 5)

3) Safari/iOS (Rev 4 and 5)

4) Chrome (the latest and current release - auto updating)

5) Firefox (the latest and current release - auto updating) Soft Client Compatibility: The Quick-Connect USB Mini is compatible with the following soft codecs or

applications, in no particular order:

1) Skype Win 7 & Mac OS X (10.7)

2) Web Ex (WBS 28.7 and up) Win 7 & Mac OS X

3) Microsoft Lync Win 7

4) Cisco Jabber Win 7 & Mac OS X

5) Vidyo Desktop Win 7 & Mac OS X

6) Google Plus Win 7

7) Adobe Connect 8 Win 7 & Mac OS X

8) LifeSize ClearSea Win 7

9) GoToMeeting (Citrix) Win 7 & Mac OS X

10) Polycom M100 Win 7

11) Panaopto (lecture capture) Win 7

Compatibility: Media Players:

The UVC with MJPEG and IP with H.264 video are compatible with the industry leading PC media players.

 Quick-Time 10.2  VLC Media Player 2.0.4  Real Player 16.0

Compatibility: Operating Systems

 Apple OS X (10.7 and above)  Windows XP w/Service Pack 3 with known issues and errata  Windows 7  Linux

Evolving Compatibilities:

As more UC soft-client and lecture capture programs are released and gain popularity, Vaddio will provide a continuing research and development effort to ensure the compatibility with other manufacturer’s products.

Compatible with USB 2.0 UVC Drivers

The USB 2.0 UVC (Universal Video Class) video driver resolution table is an internal list of resolutions available for the Host PC and the USB Mini to negotiate and use for any approved/tested USB application. Typically, the highest resolution possible between both the PC and USB Mini is used. However, not all OS and application combinations are altogether typical.

Table: Supported UVC Resolutions

MJPEG 1280 x 720 15/30 16:9

Note: The bandwidth of USB 2.0 limits the maximum resolution to 720p/30 using MJPEG compression.

Format Resolution Frame Rate Aspect Ratio

960 x 544 15/30 16:9 704 x 576 15/30 4:3 640 x 480 15/30 4:3 640 x 360 15/30 16:9 424 x 240 15/30 4:3 352 x 240 15/30 4:3 320 x 240 15/30 4:3 320 x 180 15/30 16:9

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 13 of 30

ZoomSHOT 20 QMini System

NTERNAL WEB PAGES AND CONTROL

The internal web pages will allow control of the USB Mini and control of the attached camera via a network connection. These web pages will allow the user or administrator to set security passwords, change the IP address, view diagnostics, access the firmware upgrade page and more!

USB Mini Web Page Tour

Screen Shot: Login

The USB Mini has an integrated webserver a user’s camera control page at one level and an administrator’s management tool at another level, which requires password authentication for access.

The Login Page will appear if there is a user name assigned by the administrator. Assigning a user name can limit access to the admin menus by a general user. By default, the User name is blank and the password for the User account is password. The Administrator can set the name and password for the User acco unt. If no user name is assigned, the web page will automatically open to the Camera Control page when the USB streaming mode is toggled to Web Control Mode. The video is switched off in Web Control Mode, so as mentioned earlier the IR SHOT Commander Remote is the best way to control the camera in real time.

Screen Shot: Camera Control Page - No Camera Detected

The No Camera Detected window will appear if the USB Mini has no communication with a Vaddio camera through the RS-232 serial data port. Check the camera power and serial connections if the camera is not detected within 30 seconds of initialization. USB Mini controls the camera over the serial connection.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 14 of 30

ZoomSHOT 20 QMini System

Screen Shot: Camera Control Page and User Menu for ZoomSHOT 20

(Adjustable in web server mode only)

1) Home Control: The Home button will return the camera to a full wide end view (1X). This control is functional with the ZoomSHOT 20 camera.

2) Zoom Control: The ZoomSHOT 20 lens can be controlled with the “+” to zoom-in (tele end) and the “-“ to zoom out (wide end). This control works with the ZoomSHOT 20, but the manual lens on the WideSHOT can’t be controlled.

3) Zoom Speed Control: The speed for the zoom control can be adjusted with the button in this section. For tighter shots, it is recommended that the slower speed is used.

4) Store Preset Button: Clicking the Store button opens up a pop-up dialog box. To set presets, set up the camera shot with the IR remote, toggle to Web Control mode and open the Camera Control menu, click on choice of preset number (1 through 6). The preset is stored and the dialog box closes. Toggle back to streaming mode on the USB Mini.

5) Camera Pres ets: Up to six (6) zoom presets can be stored and recalled simply by clicking a preset number.

6) CCU Scenes: The user has access to the CCU scenes set and stor ed by the Admin. There are three (3) user

definable presets and six (6) presets preconfigured by the technical folks at Vaddio (really Scott set them all) that are meant to be used in certain lighting scenarios. These lighting presets included; Automatic, Incandescent Hi, Incandescent Lo, Fluorescent Hi, Fluorescent Lo and Outdoor.

7) Administration Menu: By clicking on the Administration menu bar, the Admin Login screen will appear. The default Admin password is: password

Vertical: The vertical button will reduce the size of the window for the user controls and

remove the menu tabs on the left side of the screen. Click on ‘Full’ for the full sized camera control web pages.

screen mode.

➐

For the most part, use the web control pages in full

➊

➎

➏

➋

➌

➍

Image:

Reduced window size for camera control

➑

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 15 of 30

ZoomSHOT 20 QMini System

Screen Shot: Admin Log-in

By selecting the Admin Menu Bar, the Admin Login password pop-up window will appear and await the entry of the password. By entering the Admin menus, 10 more menu keys appear on the left side of the screen.

The default Admin Account Password is password

Cancel and Save Buttons

Note: At the bottom of each of the admin menus, there is a Cancel and Save button. Please

click on the Save button before exiting each web page if the changes made require retention. Click Cancel to delete any changes made to the page while exiting.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 16 of 30

ZoomSHOT 20 QMini System

Screen Shot: Admin Menu - Camera Settings Page

The Camera settings page provides the parameters to allow the end user to match the camera to the environment, set the CCU presets and make startup assignments. Note: These controls can’t be adjusted in real-time while viewing video, but if the IR SHOT Commander is used to change the color settings in video streaming mode, then those settings are reflected on this page, which can be saved in a preset.

1) Load Preset at Startup: Check this box to move the camera to a predefined preset location when the camera powers up. Use the pull down menu to select the Preset 1 through 6 to be loaded when this box is checked.

2) Load CCU Scene at Startup: Check this box to load a CCU Scene into the camera when the camera powers up. The pull down menu will allow the selection of one of the 6-factory scenes, or any of the three (3) user defined scenes.

3) CCU Scenes: Click on any of these 9-buttons to load one of the CCU scenes into the camera. These scenes can be fine-tuned if changes are needed, and stored into any of the three user defined scenes.

4) Color Settings: When painting or shading camera scenes for specific lighting situations or environments. The parameters within the Color Settings section are defined below (top to bottom):  Auto Iris check box: When checked, the camera will operate in Auto Iris mode, when unchecked, the

camera will be in Manual Iris mode and allow adjustment of Iris and Iris Gain levels.

 Iris: Move adjustment slider as required to adjust the iris opening. A numeric value is displayed in the box

to the right of the slider.

 Gain: Move adjustment slider as required for amount of iris gain desired. A numeric value will be displayed

in the box to the right of the slider.

➌

➍

➊

➋

➎

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 17 of 30

ZoomSHOT 20 QMini System

 Auto White Balance check box: When checked, camera will operate in Auto White Balance mode, when

unchecked camera will be in Manual White Balance Mode and allow for adjustment of Red and Blue Gain.

 Red Gain: Move the adjustment slider as required for amount of Red Gain desired. A numeric

value will be displayed in the box to the right of the slider.

 Blue Gain: Move the adjustment slider as required for amount of Blue Gain desired. Numeric

value will be displayed in the box to the right of the slider.

 Back Light Compensation: When checked, Back Light Compensation will be applied to the camera if

BLC is supported by the camera and the camera is in Auto White Balance mode.

 Detail: Move the adjustment slider as required for amount of detail (Aperture) desired. A numeric value

will be displayed in the box to the right of the slider. Note: If the detail is too high, the video can look grainy and appear noisy too.

 Chroma: Move the adjustment slider as required for the amount of Chroma (Color Vibrancy) desired. A

numeric value will be displayed in the box to the right of the slider.

 Store CCU Scene button: Once the desired scene adjustments have been made, this button will activate

a pop-up menu that can be used to store this scene into one of the three user defined scene locations. These user-defined scenes can be named as required for clarity and may be adjusted and re-saved at any time.

5) Custom CCU Scene Labels: The labels for the (3) user Defined customizable scenes can be changed as needed. Mouse the cursor into the appropriate window and edit the text. Press Save to store changes or press Cancel to exit this window.

Screen Shot: Admin Menu - Streaming Page

1) Streaming Mode: Streaming for the USB Mini is limited to USB 2.0 streaming (MJPEG).

2) USB Device Name: The USB device “friendly” name is displayed here. This parameter is editable.

3) Color Space: The UVC drivers will negotiate the color depth, but this parameter allows the user to reduce the

color depth to 4:2:0, which is used with the older/cheaper webcams and applications, where image quality is not as critical. The 4:2:2 color is used by many applications that take advantage of the performance of the camera where the colors are more vibrant and precise.

4) Whe

n finished setting up the streaming mode, click save to put the changes into effect, or cancel, which will not

save the configuration.

➊

➋

➌

➍

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 18 of 30

ZoomSHOT 20 QMini System

Screen Shot: Admin Menu - Room Labels

The Room Labels menu allows the administrator to label the company name, room name, room phone and help phone on a per USB Mini basis. The labels appear on every page at the top/middle of the page. Simply enter the room information and click Save.

Screen Shot: Admin Menu - Networking

Under the Networking menu, the Network Configuration page displays the Hostname and allows configuration of Ethernet over the USB port.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 19 of 30

ZoomSHOT 20 QMini System

Screen Shot: Admin Menu - Security

The Security menu allows the Admin to UPDATE “user” PASSWORD and UPDATE “admin” PASSWORD. The default “user” password is still password. The default “admin” password is also password. The Network administrator can reassign the user name and password as well as the admin password. There is only one user password and one admin password at any given time. If changes are made, click on Save to store the change.

Screen Shot: Admin Menu - Diagnostics

Diagnostics menu button will display a set of self-diagnostics. These diagnostics may help the Vaddio technical support team diagnose a problem with the USB Mini and the attached camera.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 20 of 30

ZoomSHOT 20 QMini System

Screen Shot: Admin Menu - System Menu

The System Menu is where the Firmware Updates are performed. There will be firmware updates and upgrades over the life of the Quick-Connect. The file for the firmware update is chosen in this menu and the up date is started here too.

Screen Shot: Admin Menu - Update Confirmation

After clicking on “Begin Firmware Update…” a confirmation pop-up and warning will be displayed. Please contact Vaddio Technical Support for assistance with updates. Please read and completely understand the pop-up warnings, as it is easy to lose patience waiting for updates. Click on continue to start the update.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 21 of 30

ZoomSHOT 20 QMini System

Screen Shot: Admin Menu - Update in Progress

After the firmware load is started, a pop-up screen will advise patience and notify, in terms of a percentage completed, the progress of the firmware update load. Again, please don’t interrupt the firmware load.

Screen Shot: Admin Menu - Help

Service/Help information is located under the Help menu. Support phone numbers and e-mail, manuals, FAQ’s and System information are listed on this page. Have this page open when calling Vaddio Technical Support.

TECHNICAL SUPPORT NOTE: Please work with your Network Administrator prior to calling Vaddio for technical support. Please have on-site network personnel initiate tech support calls with Vaddio only.

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 22 of 30

ZoomSHOT 20 QMini System

CONNECTING THE USB MINI AND ZOOMSHOT 20 TO THE PC AND PROGRAM OF CHOICE

The USB Mini and attached camera are compatible with many programs and media players. The following is an attempt to generally describe the steps to plug in the USB Mini with a Vaddio ZoomSHOT 20 camera and get an image in a couple of popular programs.

Skype Example:

1) After connecting a camera to the USB Mini, with a quality USB 2.0 cable, plug the USB-B port of the USB Mini Interface to the USB-A port of the computer. A pop up window on the computer monitor will display the following:

a. Found USB Mini b. Found USB Composite Device c. Found USB Video Device

2) Open Skype and perform the following steps:

a. Open the Tools Menu and drop down to Options b. Click on Video Settings and under Webcam choose USB Video Device

The systems will negotiate the highest resolutions possible, depending on the computer speed, network quality, cabling etc..., and display the video signal of the camera. The camera attached to the USB Mini is best controlled with the supplied Vaddio IR SHOT Commander or through IP as described earli er with the USB Mini’s web page s. Make a test call to ensure the system is working properly.

VLC Media Player Example:

1) Same first step as above…

2) Open VLC Media Player and perform the following steps:

a. Click on the Media menu, drop down to Open Capture Device and click it. b. Under Device Name, go to the Video Device Name drop down and choose USB Video Device. c. Under Options, enter the Video Size as 1280x720 d. Click on Play e. From there, VLC needs some instruction on the aspect ratio, so click o n Tools and drop down to Aspect

Ratio and drop down again to 16:9 for 720p (1280x720).

VLC is a powerful record/playback system will buffer the images creating some delay in the way VLC displays the image. This expected and normal.

With all the compatible software available, in general terms, the video device, aspect ratio, and resolution may need to be set manually the first time through initial set-up. Some systems are easier than others (li ke Skype) a nd others are more technical in nature and tend to do more stuff.

Example Program Notes: Most every OS, UC application or media player is in a constant state of updating and change. The above instructions were written at the beginning of 2013 and some steps may be slightly different. The general idea however is the same, generally…

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 23 of 30

ZoomSHOT 20 QMini System

GENERAL SPECIFICATIONS

ZoomSHOT 20 QMini System

Part Numbers ZoomSHOT 20 QMini System 999-6920-400 (North America)

ZoomSHOT 20 Camera Image Sensor 1/2.8-Type Exmor CMOS Image Sensor Total/Effective Pixels 2.38 Million Total Pixels, 2.14 Million Effective pixels Video Output Resolutions HD: 1080/59.94/50/30/25, 1080i/59.94/50, 720p/59.94/50, 16:9 Aspect Ratio Lens/ Focal Length 20X Optical Zoom, F=4.44mm wide end to 89mm tele end (F1.6 - F3.4),

Horizontal Viewing Angle Video S/N Ratio >52 dB

Minimum Illumination Color: 0.3 Lux (F1.6, 1/30 sec, 50 IRE), B/W: 0.03 Lux (F1.6, 1/30 sec, 50 IRE) Serial Control Protocol RS-232 (Modified VISCA) Manual Pan/Tilt Range Pan: Limited to service loop of cabling, yoke and base are mechanical only, Tilt: ± 30°

Preset Positions Six (6) Programmed and Recalled via IR Remote, 16 Programmed and Recalled with RS-232 Tally Light Available through RS-232 Control Camera Connectors Two (2) RJ-45 Jacks:

HD Video Select 16-Position Rotary Switch: Used to set the ZoomSHOT 20 HD Video Resolution Output Camera Settings 6-Position Dip Switch: For IR Freq., Baud Rate 9600, Image and Flip

Thin Profile Wall Mount 535-2000-237 (included) Black powder coating, Sized to fit on 1-gang wall box or drywall, mounting

User Controls IR Shot Commander Remote with OSD for camera set-up, RS-232 Materials & Weight Aluminum & Steel, Weight = 2.75643 lbs. (1.68kg) Dimensions: Tube: 3” ( 76.2mm) Diameter x 4.75” (120.65mm) Long

USB Mini Interface Video Outputs USB 2.0 (MJPEG): Resolution up to 720p/30 (Limits of USB 2.0 with MJPEG Compression to

USB Interface Connector: Type-B, USB 2.0 Compliant, Standard UVC (Universal Video Class) Drivers Network Interface Ethernet over USB 2.0 only Streaming Protocols USB 2.0, MJPEG (UVC standard drivers) Connectors

Supported Media Players

Supported Browsers

Power Supply 24 VDC, 2.08 Amp Dimensions (H x W x D) 3.60” (91.4mm) H x 4.48” (113.8mm) W x 1.25” (31.75mm) D Weight 1.1 lbs. (0.5Kg) Operating Temperatures 0°C to 40°C / 20% to 80% Relative Humidity Power Consumption <25 watts

ZoomSHOT 20 QMini System 999-6920-401 (International)

Min. Focus Distance 1.5m Horizontal: 63º Wide End to 3.47º Tele End, (16:9 Aspect Ratio

Invertible for Ceiling Mount

 EZ-Power VIDEO RJ-45 Jack for use with Quick-Connect - Supplies power to the camera and

returns differential HD video from the camera

 RS-232 RJ-45 Jack (RS-232 Communication)

16-Position Rotary Switch for Output Resolution Settings

hardware included

Base: 5.5” (139.7mm) Diameter Overall Height: 5.5” (139.7mm) Tall

achieve 30 fps)

 Power: 5.5mm OD x 2.5mm ID Coaxial Connector  RS-232 Port: Shielded RJ-45 Jack  EZ-Power Video Port: Shielded RJ-45 Jack (Power and Differential HD Video)

 Quick-Time Media Play - Win 7 & Mac OS10X  VLC Media Player - Win 7 & Mac OS10X  Real Player - Win 7

 Internet Explorer  Safari  Safari/iOS  Chrome  Fire Fox

)

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 24 of 30

ZoomSHOT 20 QMini System

OMPLIANCE AND CE DECLARATION OF CONFORMITY FOR ZOOM

Compliance testing was performed to the following regulations:

 FCC Part 15 (15.107, 15.109), Subpart B Class A  ICES-003, Issue 4: 2004 Class A  EN 55022 A: 2006 + A1: 2007 Class A  KN22 2008 (CISPR 22: 2006) Class A  KN24 2008 (CISPR 24: 1997 + A1: 2000 + A2: 2002) Class A  EMC Directive 2004/108/EC Class A 

EN 55024: A2: 2003

Class A

SHOT 20

FCC Part 15 Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15, Subpart B, of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment.

ICES-003 Compliance

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux appareils numeriques de la classe A préscrites dans le Règlement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada.

European Compliance

This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for Emissions and Immunity and meets the requirements for a Class A digital device. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Standard(s) To Which Conformity Is Declared: EMC Directive 2004/108/EC EN 55022 A: 2006 + A1: 2007(CISPR 22:2005/A1:2005) Class A EN 55024: A2: 2003 Immunity

 EN 61000-4-2: 1995 + Amendments A1: 1998 + A2: 2001 Electrostatic Discharge  EN 61000-4-3: 2006 + A1: 2008 Radiated Emissions  EN 61000-4-4: 2004 + Corrigendum 2006 Electrical Fast Transients  EN 61000-4-5: 2006 Surge Immunity  EN 61000-4-6: 2009 Conducted Emissions  EN 61000-4-8: 2010 Power Frequency Magnetic Field  EN 61000-4-11: 2004 Voltage Dips, Interrupts and Fluctuations

KN24 2008 (CISPR 24: 1997 + A1: 2000 + A2: 2002) IT Immunity Characteristics (Same as EN 61000) IEC 60950-1:2005 (2nd Edition); Am 1:2009 Information Technology Equipment - Safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011 Information Technology Equipment - Safety

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 25 of 30

ZoomSHOT 20 QMini System

OMPLIANCE AND CE DECLARATION OF CONFORMITY FOR QUICK-CONNECT

USB M

INI

Compliance testing was performed to the following regulations:

 FCC Part15, Sections 15.107, 15.109 Subpart B Class A  ICES-003 ISSUE 4, 2004 Class A  EN55022 A1 2007 Class A  EMC Directive 2004/108/EC Class A



EN 55024: A2: 2003

Class A

 IEC 60950-1:2005 (2nd Edition); Am 1:2009 Class A

EN 60950-1:2006+A11:2009+A1:2010+A12:2011



Class A

  FCC Part 15 Compliance

device must accept any interference including interference that may cause undesired operation of the device.

 Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void

the user’s authority to operate this equipment.

ICES-003 Compliance ICES-003, Issue 4: 2004

This digital apparatus does not exceed the Class A limits for radio noise emissi ons from digita l apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’emet pas de bruits radioélectriqu es dépassant les limites applicables aux appareils numeriques de la classe B préscrites dans le Règlement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada.

European Compliance

This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for Emissions and Immunity and meets the requirements for a Class A digital device. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

Standard(s) To Which Conformity Is Declared:

EMC Directive 2004/108/EC EN 55022 A: 2006 + A1: 2007(CISPR 22:2005/A1:2005) Class A EN 55024: A2: 2003 Immunity

IEC 60950-1:2005 (2nd Edition); Am 1:2009 Information Technology Equipment - Safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011 Information Technology Equipment - Safety

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 26 of 30

ZoomSHOT 20 QMini System

WARRANTY INFORMATION

(See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details):

Hardware* Warranty: Two (2) year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio warrants

its manufactured products against defects in materials and workmanship for a period of two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such defects during the warranty. Vaddio, at its option, will repair or replace products that prove to be defective. Vaddio manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry standard practices.

Exclusions: The above warranty shall not apply to defects resulting from improper or inadequate maintenance by the customer, customers applied software or interfacing, unauthorized modifications or misuse, mishandling, operation outside the normal environmental specifications for the product, use of the incorrect power supply, modified power supply or improper site operation and maintenance. OEM products and products manufactured by other companies are excluded and are covered by the manufacturer’s warranty.

Vaddio Customer Service: Vaddio will test, repair, or replace the product or products without charge if the unit is under warranty. If the product is out of warranty, Vaddio will test then repair the product or products. T he cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to repair. All compon ents must be returned for testing as a complete unit. Vaddio will not accept responsibility for shipment after it has left the premises.

Vaddio Technical Support: Vaddio technicians will determine and discuss with the customer the criteria for repair costs and/or replacement. Vaddio Technical Support can be contacted through one of the following resources: e-mail support at

support@vaddio.com or online at vaddio.com.

Return Material Authorization (RMA) Number: Before returning a product for repair or replacement request an RMA from Vaddio’s technical support. Provide the technician with a return phone number, e-mail address, shipping address, product serial numbers and original purchase order number. Describe the reason for repairs or returns as well as the date of purchase. See the General RMA Terms and Procedures section for more information. RMA’s are valid for 30 days and will be issued to Vaddio dealers only. End users must return products through Vaddio dealers. Include the assigned RMA number in all correspondence with Vaddio. Write the assigned RMA number clearly on the shipping label of the box when returning the product. All products returned for credit are subject to a restocking charge without exception.

Voided Warranty: The warranty does not apply if the original serial number has been removed or if the product has been disassembled or damaged through misuse, accident, modifications, use of incorrect po wer supply, use of a modified power supply or unauthorized repair.

Shipping and Handling: Vaddio will not pay for inbound shipping transportation or insurance charges or accept any responsibility for laws and ordinances from inbound transit. Vaddio will pay for outbound shipping, transportation, and insurance charges for all items under warranty but will not assume responsibility for loss and/or damage by the outbound frei ght carrier. If the return shipment appears damaged, retain the original boxes an d packing material for inspection b y the carrier. Contact

your carrier immediately. Products not under Warranty: Payment arrangements are required before outbound shipment for all out of warranty products.

*Vaddio manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry standard practices.

Other General Information: Care and Cleaning

Do not attempt to take this product apart at any time. There are no user-serviceable components inside.

 Do not spill liquids in the product  Keep this device away from food and liquid  For smears or smudges on the product, wipe with a clean, soft cloth  Use a lens cleaner on the lens - not a hanky  Do not use any abrasive chemicals.

Operating and Storage Conditions:

Do not store or operate the device under the following conditions:

 Temperatures above 40°C (104°F) or temperatures below 0°C (32°F)  High humidity, condensing or wet environments  In inclement weather  In swimming pools or under landscape waterfalls  Dry environments with an excess of static discharge  In orbit (collision and gravity issue)

 Under severe vibration

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 27 of 30

ZoomSHOT 20 QMini System

APPENDIX 1: PIN-OUTS FOR ZOOMSHOT 20 CAMERA AND QUICK-CONNECT USB MINI

Table: EZ-POWER VIDEO RJ-45 Connector Pin-outs

Pin Signal

1 Power+ 2 Power3 Y+ 4 PB+ 5 PB 6 Y 7 PR+ 8 PR-

Important Note: The EZ-POWER VIDEO RJ-45 Connector on a Vaddio Cat-5 system camera is for use with the Quick-Connect SR, Quick-Connect DVI/HDMI SR, Quick-Connect USB and USB Mini Interfaces ONLY (568B Wiring Standard). The video signals are differential (HSDS) and can only be processed by the interfaces above.

Table: ZoomSHOT 20 Camera RS-232 Port

Pin # Function

Pin - 1 N/A Pin - 2 N/A Pin - 3 N/A Pin - 4 Not Used with QC-USB Mini Pin - 5 Not Used with QC-USB Mini Pin - 6 Digital GND Pin - 7 RXD (from TXD of control source) Pin - 8 TXD (to RXD of control source)

EZ-POWER VIDEO

12345678

RS-232

12345678

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 28 of 30

ZoomSHOT 20 QMini System

SYSTEM NOTES:

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 29 of 30

ZoomSHOT 20 QMini System

©2015 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice or obligation. Vaddio, ZoomSHOT 20, WideSHOT, EZCamera, EZIM, Quick-Connect and HSDS are trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number 342-0970 Rev A, SD: 68903.5

ZoomSHOT 20 QMini System Document Number 342-0970 Rev A Page 30 of 30

Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464

www.vaddio.com

VADDIO ZOOMSHOT 20, 999-6919-101, ZOOMSHOT QMINI, 999-6919-100 Installation And User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual