Vaddio Z700 User Manual
Camera and Electronic Products for Integrators
g
Installation and User Guide
V
AADDDDIIO
V
O
™
™
W
W
AALLLL
M
OOUUNNTT FFOORR
M
S
S
Y
OONNY
®
®
BBRRCC--ZZ770000
Model Number: 535-2000-225
Figure 1:
Installation Diagrams for 535-2000-225
UNPACKING:
Carefully remove the product and all of the parts from the packaging.
Unpack and identify the following parts:
One (1) Wall Mount for Sony BRC-Z700
(Camera not included)
Two (2) ¼”-20 x ½” mounting screws
Four (4) #8 x 1- ¼” sheet metal screws
Four (4) spiral type drywall anchors
MOUNTING THE CAMERA:
The Wall Mount for the Sony BRC-Z700 HD camera can be mounted to a 3-gang wall box or mounted directly to a drywall surface
with the supplied spiral type wall anchors or other wall anchors of the integrator’s choice. The slotted mounting holes are 90º opposed
from top to bottom to ensure that the camera can be adjusted and mounted level. Note: When locating the camera, consider viewing
angles, lighting conditions, possible line of site obstructions and check for in-wall obstructions where the camera is to be mounted.
Pick a mounting location to optimize the performance of the camera.
INTENDED USE:
This Wall Mount was designed, built and tested for use indoors and to support the weight, size and shape of the Sony BRC-Z700 PTZ
camera. Using this mount for any other device could damage that device and/or create a potentially unsafe operating condition. The
installer is responsible for safely mounting the 535-2000-225 wall mount
HARDWARE WARRANTY:
Please see the Vaddio website at http://www.vaddio.com
Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical
Support, Return Material Authorizations (RMA), Voided Warranty, Shipping, Handling and Products Not Under Warranty. The Vaddio
Warranty Statement supercedes all other published warranty statements in content and coverages. Vaddio Technical Support can be
contacted through the Vaddio website or through e-mail support at mailto:support@vaddio.com
Durable black powder
coat finish (paintable
to match any décor)
Heavy duty 11-gauge
steel construction
Dual ¼”-20 x ½”
mountin
and attaching the camera to the mount securely.
for the Vaddio Statement of Warranty for all Vaddio Products. The
screws
Figure 2: BRC-Z700 on
535-2000-225 Mount
.
Mounts to a 3-gang
electrical box or
directly to drywall
with wall anchors
90º Opposed slotted
mounting holes for
easy camera leveling
Welded seams for
strength and stability
©2008 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change
without notice. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners. Toll Free: 1-800-572-2011,
Main: 763-971-4400, FAX: 763-971-4464. Document Number 341-675 Rev. A
Loading...