VADDIO WallVIEW HD-USB SR System, ClearVIEW HD-USB Installation And User Manual

Download

Page 1

Installation and User Guide

WallVIEW™ HD-USB SR System

Featuring the ClearVIEW™ HD-USB PTZ Camera, CONCEAL™ Mount, Active USB Extension Cable and Power Extension Module

Part Numbers: 999-6994-000 - North America 999-6994-001 - International

Camera Software Revision 2.1.0

Page 2

WallVIEW HD-USB SR Camera System

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 2 of 40

Page 3

WallVIEW HD-USB SR Camera System

Table of Contents

Overview: ................................................................................................................................................................................................................ 4

Unpacking ............................................................................................................................................................................................................... 5

ClearVIEW HD-USB PTZ Conferencing Camera ............................................................................................................................................... 6

Diagram: Rear View Connectors with Feature Call-outs: ............................................................................................................................. 6

Diagram: Front View with Feature Call-outs: ................................................................................................................................................ 7

Connecting the Extension Devices to the Camera ................................................................................................................................................. 8

Diagram: Basic Connectivity Example: ......................................................................................................................................................... 8

Diagram: Connection Detail with the Power Extension Module and the Active USB 2.0 Extension Cable .................................................. 9

Diagram: Connection Detail with Local Power to the Camera and the Active USB 2.0 Extension Cable ..................................................... 9

Reference Diagrams ............................................................................................................................................................................................. 10

Reference Diagram: Basic Connectivity Example ...................................................................................................................................... 10

Reference Diagram: Connectivity Example 2 with Audio: ........................................................................................................................... 10

Reference Diagram: H.264 Streaming Connectivity (for Release 2.0 when IP Streaming is enabled): ...................................................... 11

Reference Diagram: Connection Diagram Example using A CDN (for release 2.0 when IP is enabled): .................................................. 11

First Time Set-up with the ClearVIEW HD-USB PTZ Camera .............................................................................................................................. 11

Getting Started ................................................................................................................................................................................................. 12

Table: Switch Setting Label on Bottom of the HD-USB Camera: ............................................................................................................... 12

Step by Step Instructions to install the WallVIEW HD-USB SR Camera System ................................................................................................. 13

Compatibility .......................................................................................................................................................................................................... 14

Supported UVC Resolutions ............................................................................................................................................................................. 15

Table: Supported UVC Resolutions ............................................................................................................................................................ 15

Keyboard Hot Keys for PTZ functions: ............................................................................................................................................................. 15

Table: Keyboard Hotkeys ............................................................................................................................................................................ 15

Internal Web Pages and Control: .......................................................................................................................................................................... 16

DHCP Set-up (Dynamic Host Configuration Protocol) ..................................................................................................................................... 16

Static IP Set-up: ................................................................................................................................................................................................ 17

Screen Shot Tour: ................................................................................................................................................................................................. 18

Connecting the Camera to the Program of Choice: .............................................................................................................................................. 26

Skype Example ............................................................................................................................................................................................ 26

VLC Media Player Example ......................................................................................................................................................................... 27

Technical Specifications:

Compliance and CE Declaration of Conformity: ClearVIEW HD-USB PTZ Camera ........................................................................................... 28

Warranty Information: ............................................................................................................................................................................................ 29

Appendix 1: Communication Specification ........................................................................................................................................................... 30

Firmware Version 2.1.0 Release Notes: ............................................................................................................................................................... 31

Firmware Version 2.0.0 Previous Release Notes: ................................................................................................................................................ 31

Table: HD-USB PTZ Camera and UC Client Software Interoperability Testing .......................................................................................... 32

Previous Release Notes:....................................................................................................................................................................................... 33

Appendix 2 - Telnet Serial Command API ............................................................................................................................................................ 34

Telnet Command List ....................................................................................................................................................................................... 34

....................................................................................................................................................................................... 27

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 3 of 40

Page 4

WallVIEW HD-USB SR Camera System

prop

VERVIEW

Based on the remarkable Vaddio ClearVIEW HD-USB PTZ Conferencing Camera, the WallVIEW HD-USB SR (SR stands for short range) system includes the features that are expected out of a WallVIEW branded product. The ClearVIEW HD-USB is the world’s first broadcast-quality HD PTZ camera with USB 2.0 UVC (Universal Video Class) video output, IP streaming, internal web pages for control and HD analog component (YPbPr) outputs built right into the camera. Simply plug the HD-USB camera directly into your PC and there is no need for a separate capture cards or other devices to make it work. The ClearVIEW HD-USB uses standard USB 2.0 UVC drivers, which means that no special USB drivers, applications or associated headaches are required. As a result, the HD-USB camera works seamlessly with any software application running on any OS that supports USB 2.0 video class or IP devices. All this, and the ClearVIEW HD-USB PTZ cameras are made in the USA too.

The ClearVIEW HD-USB combines impressive performance with an equally impressive feature set. The HD-USB camera is a plug and play PTZ camera for Unified Communications soft client conferencing systems such as Skype®, WebEx® Jabber® and Lync® that offers a totally vast improvement over the “inexpensive webcam” systems available today.

The HD-USB is a HD conferencing camera suitable for the small, medium or even the largest conferencing space available. The HD zoom lens allows HD-USB to capture a wide angle of view (58.1° wide end) to view everyone at a conference room table, as well as capture an individual from a long distance (3.2° tele end) in a larger room. The motorized, multi-element, glass zoom lens offers 19X optical zoom and is built around a 1/3-Type Sony® Exmor progressive scan, high-speed, low noise CMOS image sensor with a total of 1.3 Megapixels for precise and vibrant HD color video images. The HD-USB achieves improved picture quality even in low light environments requiring a minimum illumination rated at an astonishingly low 0.7 LUX (F1.6 - 50IRE).

Like the ClearVIEW HD-USB PTZ Camera, the ClearVIEW HD-USB will support USB 2.0 (UVC) and IP (H.264) video streaming (with Firmware Release 2.0.x). The Ethernet network interface provides for both IP control (with built-in web pages) and IP streaming. IP Streaming will support either RTSP or HLS streaming protocols. The software is easily upgradeable in the field over the Ethernet port.

The WallVIEW HD-USB SR system includes the HD-USB camera, the CONCEAL camera mount, an active portpowered 20m (65.6168’) USB 2.0 extension cable, the Vaddio Power Extension Module for extending power over Cat-5 cable to the camera and all the USB 2.0 cables, power supplies and mounting hardware that are required to install the WallVIEW HD-USB SR system.

Important Safeguards:

Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.

Use only the power supplies provided with the system. Use of any unauthorized power supply will void any and all warranties.

Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not work well for professional installations and can be the cause of intermittent connec tions or shorts, which can result in the RS-232 control line failing and locking up, and/or compromising the HSDS™ signals. For best results please use standard RJ-45 con nectors and test all cables for

er pin-outs prior to use and connection to Vaddio product.

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 4 of 40

WallVIEW HD-USB SR System with CONCEAL Mount

Page 5

WallVIEW HD-USB SR Camera System

Intended Use:

Before operating the device, please read the entire manual thoroughly. The system was designed, built and tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the one provided or outdoor operation has not been tested and could damage the device and/or create a potentially unsafe operating condition.

Save These Instructions:

The information contained in this manual will help you install and operate your product. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from

www.vaddio.com free of charge.

NPACKING

North American Version 999-6994-000

Carefully remove the device and all of the parts from the packaging. Unpack and identify the following parts:

 One (1) ClearVIEW HD-USB PTZ Camera (998-6990-000)  One (1) Vaddio IR Remote Commander  One (1) EZCamera™ Control Adapter (RJ-45 to DB-9)  One (1) Vaddio PowerRite™ 12 VDC, 3.0 Amp Power Supply  One (1) AC Cord Set for North America  One (1) 10’ (3.05m) USB 2.0 Type A (Male) to USB B (Male) Cable  One (1) 1’ (305mm) USB 2.0 Type A (Male) to USB B (Male) Cable  One (1) 20m (65’) Active, Port Powered USB 2.0 Extension Cable  One (1) Power Extension Module



One (1) 24 VDC, 2.08 Amp PowerRite™ Switching Power Supply

 One (1) AC Cord Set for North America  One (1) CONCEAL Mount and Hardware for the HD-USB Camera  Documentation

International Version 999-6994-001

Carefully remove the device and all of the parts from the packaging. Unpack and identify the following parts:

 One (1) ClearVIEW HD-USB PTZ Camera (998-6990-000)  One (1) Vaddio IR Remote Commander  One (1) EZCamera™ Control Adapter (RJ-45 to DB-9)  One (1) Vaddio PowerRite™ 12 VDC, 3.0 Amp Power Supply  One (1) Euro Power Cord  One (1) UK Power Cord  One (1) 10’ (3.05m) USB 2.0 Type A (Male) to USB B (Male) Cable  One (1) 1’ (305mm) USB 2.0 Type A (Male) to USB B (Male) Cable  One (1) 20m (65’) Active, Port Powered USB 2.0 Extension Cable  One (1) Power Extension Module



One (1) 24 VDC, 2.08 Amp PowerRite™ Switching Power Supply

 One (1) Euro Power Cord  One (1) UK Power Cord  One (1) CONCEAL Mount and Hardware for the HD-USB Camera  Documentation

Broadcast Truck Not Included

WallVIEW HD-USB SR Cam

era System, Document Number 342-0465 Rev. D Page 5 of 40

Page 6

WallVIEW HD-USB SR Camera System

ClearVIEW HD-USB PTZ Conferencing Camera

Diagram: Rear View Connectors with Feature Call-outs:

④

③

②

①

⑤

⑥

Note: Use the EZ POWER VIDEO port with the Power Extension Module

⑨

⑧

⑩

⑪

⑫

⑬

⑦

Connectors and Functions:

1) 12 VDC Input: Power input on EIAJ-04 connector for local power.

2) HD Video Select: A rotary switch that allows the user to choose the component HD output video resolution

and format. All USB 2.0 UVC resolutions are derived from 720p/59.94. The USB 2.0 processor can accept rotary positions 0 through 6. Please see the sections on available resolutions and concurrent resolutions when using USB 2.0 and analog component outputs.

3) Camera Settings (Dip Switch Settings): Settings for IR remote frequency, baud rate, SD output format, and

image flip, test bars can be configured on these switches.

4) RS-232 IN & IR Out: The upper RS-232 Port is not implemented on the HD-USB Camera. Use the RS-232

Port on the lower card ONLY.

5) YPbPr Output: Component HD video is fed through the DE-15 connector (HD-15 for the shell sized

challenged). YPbPr and Composite signals are simultaneous. Note: This is an HD camera and the SD signals are down converted and are really not the sweet spot of this camera. This is a courtesy feature only.

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 6 of 40

Page 7

WallVIEW HD-USB SR Camera System

Connectors and Functions (continued)

6) Composite Video (CVBS) Output: The CVBS output feeds out SD video signals and is configurable with

the dip switches to choose between 480i/NTSC or 576i/PAL in 4:3 formats. Squeeze and letterbox modes are also available (see dip switches).

7) EZ POWER VIDEO Port: Use the RJ-45 EZ POWER VIDEO port with the Power Extension Module. The

Power Extension Module sends DC power over pins 1 & 2 to power the HD-USB camera for up to 150’ (45.72m). In the Case of the WallVIEW HD-USB SR system, the limitation is the USB 2.0 Extension Cable, which extends USB 2.0 only 65’ (20m).

8) 5 VDC Output: The 5 VDC output is on an EIAJ-03 connector was added to supply power to the active

Extreme USB Extender transmitter side. The receiver side is powered by the computer’s USB port.

9) USB 2.0 Connector: The USB 2.0 is on a type-B Female and attaches to a PC running a soft-client video

conferencing system or video capture software that uses UVC (USB Video Class) standard drivers. No other drivers are required to plug the HD-USB into a computer and have it work. The UVC drivers will auto negotiate the top resolution that the PC and HD-USB Camera can share together and auto-implement it.

NOTE: Do not use USB 1.1 cable with the HD-USB Cable because it won’t work.

10) Settings Rotary Switch: The Settings rotary switch is essentially for future applications. Leave this switch

on position “0” for normal operation. Position “C” is used for a reset to factory defaults. To reset the camera and erase all the stored internal data, place this switch on “C” and power cycle the camera. Move the switch to “0” again for normal operation.

11) Ethernet 10/100 Port (H.264 Streaming Active with Firmware Release 2.0.x): The network port has

green and yellow LEDs that indicate ready and usage states. The port allows for access to the internal web pages for camera set-up and control (nice). The network port will stream (unicast) H.264 video (from CIF up to and including 1080p/30). IP Streaming supports RTSP and HLS formats.

12) RS-232 Port: The RS-232 Port allows external control systems to engage a rudimentary API. Basic

functions include pan, tilt zoom, on/off etc. The functions on the Vaddio IR Remote Commander are mirrored in the API. Most control is expected to come from the internal web page via Ethernet or Telnet.

13) Permanent USB Resource Slot Card: The lower row of connectors and the brains of the HD-USB Camera

are located on this permanent slot card. The card is not removable and is not compatible with any other Vaddio camera. Please do not try to remove this card at any time.

ClearVIEW HD-USB PTZ Conferencing Camera

Diagram: Front View with Feature Call-outs:

1) Zoom Lens and Image Sensor: The 19X optical zoom lens is

built around a 1/3-Type, high-speed, progressive scan CMOS image sensor with a total of 1.3 Megapixels for precise HD video image acquisition.

2) Blue Power Light: A Vaddio blue power light is illuminated

when the camera is turned on.

3) IR Sensors: IR sensors are built into the front of the HD-USB to receive IR signals from the IR remote

control supplied with the camera.

4) Red Tally Light: T

Camera

he red tally light is not used with the HD-USB

➊

➌

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 7 of 40

➍

➋

Page 8

WallVIEW HD-USB SR Camera System

ONNECTING THE EXTENSION DEVICES TO THE CAMERA

The following diagrams pertain to the connectivity of the WallVIEW HD-USB SR Camera System with the CONCEAL Mount, Power Extension Module and 20m (65.6’) Active USB Extension Cable

Diagram: Basic Connectivity Example:

WallVIEW HD-USB with

CONCEAL Mount

To EZ POWER VIDEO RJ-45 Port

M to F

1’ (305mm)

USB 2.0 Cable

Provided

Type-B Male to

Type-A Male

Diagram: Basic Connectivity Example:

This example uses the HD-USB PTZ Camera and Vaddio’s EasyUSB Mixer/Amp, two (2) Echo Cancelling EasyMic™ MicPODs, Power Extension Module, Active USB 2.0 Extension Cable and Two (2) Bose Ceiling Speakers to create a complete room system.

WallVIEW HD-USB with

CONCEAL Mount

To EZ POWER

VIDEO RJ-45 Port

Distance Limit

20m (65.6’)

1’ (305mm)

USB 2.0

Cable

Type-B Male

to Type-A

Male

65.6’ Active

Extension Cable

Type-A Male to Type-A Female

USB 2.0 Video using

USB Video Class

(UVC) Drivers

CAT-5 Cable - 24 VDC Power

(Pin 1: +, Pin 2: -)

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 8 of 40

USB 2.0 Distance Limit with the Active

Extension Cable = 20m (65.6’)

CAT-5 Cable - 24 VDC Power

(Pin 1: +, Pin 2: -)

USB 2.0 Video using

USB Video Class

(UVC) Drivers

PC Video Monitor - HD

Large Screen Format

USB 2.0

Power Extension

Module

Active USB

2.0 Extension

Type-A Male

to Type-A

PC HD

Video

USB 2.0 Audio using

Host Tower PC with UC Application

24 VDC, 2.75A

Power Supply

Cable

Female

USB 2.0 Cable

USB Audio Class

(UAC) Drivers

24 VDC, 2.75A

Power Supply

Power Extension

Module

Host PC with Conferencing Application

Bose FS-16F Ceiling Speakers

Optimized for Voice

8 Ohm

Speaker

Cable

EasyUSB

Mixer/AMP

Cat-5e

Cable

Two (2) EasyMic MicPODs with

three (3) integrated mic elements

and three (3) Acoustic Echo

Cancellers per mic

Cat-5e

Cable

Speaker

8 Ohm

Cable

Page 9

WallVIEW HD-USB SR Camera System

Diagram: Connection Detail with the Power Extension Module and the Active USB 2.0 Extension Cable

The 24VDC connection from the Power Extension Module to the camera can provide adequate power up to 150’ (45.7m) away. The 65.6’ (20m) long USB extension cable limits the overall distance the camera and computer can be separated.

HD-USB PTZ Camera

Rear View

Power Extension

Module

1’ (305mm)

USB 2.0

Type-B Male

to Type-A

Cable

Male

65.6’ (20m) Active USB 2.0 Extension Cable Type-A Male to Type-A Female

CAT-5 Cable - 24 VDC Power

(Pin 1: +, Pin 2: -)

The 24VDC connection from the Power Extension Module will power the camera up to 150’ (45.7m) away.

DC Power

24 VDC, 2.75A

Power Supply

Modern Computer &

French Bulldog

(Not Included)

Diagram: Connection Detail with Local Power to the Camera and the Active USB 2.0 Extension Cable

In this example the camera is powered by the provided 12 VDC, 3.0 Amp power supply.

Local Power

PC Video Monitor - HD

Large Screen Format

Host Tower PC with UC Application

Provided

12 VDC Power

Supply

1’ (305mm)

USB 2.0 Cable

M F

65.6’ (20m) Active USB 2.0 Extension Cable Type-A Male to Type-A Female

PC HD

Video

USB 2.0

Connector

Warp Plasma

Conduit Not

Included

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 9 of 40

Page 10

WallVIEW HD-USB SR Camera System

EFERENCE DIAGRAMS

Reference Diagram: Basic Connectivity Example

HD-USB Camera and a Soft-client videoconferencing system (audio is not included in this example).

HD-USB

Conferencing

Camera

USB 2.0

Port

USB 2.0 using only

UVC Drivers

USB 2.0

Port

PC with Host Application

Reference Diagram: Connectivity Example 2 with Audio:

This example uses the HD-USB PTZ Camera and Vaddio’s EasyUSB™ Mixer/Amp, two (2) Echo Cancelling EasyMic™ MicPODs and Two (2) Bose Ceiling Speakers to create a complete room system using programs such as Skype®, Jabber®, Google+®, Microsoft Lync® and others. This configuration features driverless USB 2.0 Video and Acoustic Echo Cancelled (AEC) Audio.

PC Video Monitor - HD

Large Screen Format

Bose FS-16F Ceiling Speakers

Optimized for Voice

ClearVIEW HD-USB

Conferencing

Camera

USB 2.0 Cable

USB 2.0 Video using

USB Video Class

(UVC) Drivers

PC HD

Video

USB 2.0 Cable

USB 2.0 Audio using

USB Audio Class

(UAC) Drivers

8 Ohm

Speaker

Cable

EasyUSB™

Mixer/AMP

Cat-5e

Cable

8 Ohm

Speaker

Cable

Cat-5e

Cable

Tower PC with Host

Application

Two (2) EasyMic MicPODs with

three (3) integrated mic elements

and three (3) Acoustic Echo

Cancellers per mic

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 10 of 40

Page 11

WallVIEW HD-USB SR Camera System

Reference Diagram: H.264 Streaming Connectivity (for Release 2.0 when IP Streaming is enabled):

The HD-USB Camera has a Unicast streaming output suitable for up to six (6) concurrent users (at lower resolutions). This configuration shows four (4) concurrent users.

HD-USB PTZ CAMERA

H.264 STREAMING

VIDEO

Network

LAN/WAN

Internet

Reference Diagram: Connection Diagram Example using A CDN (for release 2.0 when IP is enabled):

For a Large Number of Viewer s - Use a CDN Content D istribution Netwo rk such as WOWZA, Amazon or iCloud and more…

IRST TIME SET-UP WITH THE CLEAR

VIEW HD-USB PTZ C

AMERA

The ClearVIEW HD-USB PTZ Camera was designed to be exceptionally easy to use and operate. There is documentation at the back of the manual for pin-outs. These pin-outs are also available, along with application TechNotes, from the Vaddio website www.vaddio.com.

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 11 of 40

Page 12

WallVIEW HD-USB SR Camera System

Getting Started

Step 1: Using the HD Video Select Rotary Switch and Camera Settings Dip Switch on the back of the camera, s et up

the camera’s output resolution and functional preferences. A reference label is on the bottom of the camera.

HD-USB Rear Panel

HD Video Select Switch

Camera Settings 10-Pos Dip Switches

Settings Rotary Switch Leave on “0”

Table: Switch Setting Label on Bottom of the HD-USB Camera:

IR 1

1 & 2 UP

IR 2ONIR 3

1234

DIP SWITCH SETTINGS

OUT

OFF

3768109

9600

NTSC

bps

38400

bps

6 & 7 UP

PAL

567 910

SD 4:3

SD LB

IMAGE

FLIP OFF

ON ON

TEST

BARS

OFF

HD VIDEO AND USB 2.0 SELECT

720p/59.94 - USB

OFF

1080i/59.94

1080p/59.94

1080p/60

720p/50

1080i/50

1080p/50

480i/29.97

USE ROTARY SETTINGS 0 through 6 FOR USB 2.0 OUT

8 9 A

E F

576i/25

1080p/30 1080p/25

Step 2: For the best USB 2.0 video, set the HD VIDEO SELECT switch to “0” (720p/59.94) on the HD-USB

Camera. All resolutions are derived from 720p. The USB 2.0 processor can accept rotary positions 0 through 6, but please be aware that if 1080p/60 is scaled down to 320 x 180, well…the image will look much better if the PC scales from 720p than 1080p (see note below).

Please Note: When using 1080p as the input, very low USB 2.0 resolutions such as 352 x 240 and 320 x 180 will either not look so good, won’t work or the user may wish they didn’t work due to how far the signal is scaled/smashed down by the PC from the original input. Please use 720p or position “0” for the lower resolutions. Always start from a HD resolution closest to what the UC client wants to send and display.

 For concurrent USB 2.0 and Analog Component (YPbPr), switch settings 0 through 6 are the resolutions that

can be both digital (USB 2.0 or H.264) and Analog (YPbPr). These resolutions are the most used resolutions for HD video in both HD videoconferencing and broadcast.

 For Analog (YPbPr) output, all of the HD VIDEO SELECT switch settings will operate.  The Composite output on the BNC connector is independent from the USB 2.0 / IP resolutions. The SD

settings on the BNC and are formatted by dip switches 5, 6 and 7.

Step 3: Choose the IR frequency (1, 2 or 3) on the camera for use with the IR Remote Commander. Since only one USB camera can be plugged into a PC at a time, recommended default is Freq. 1 (dip switches 1 & 2 up).

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 12 of 40

Page 13

WallVIEW HD-USB SR Camera System

Step 4: Leave the IR out OFF (up) as default. Step 5: Use 9600bps for control speed as default.

 If the camera is mounted inverted, then set the Image Flip to ON, otherwise leave it off.  The test bars are really, really, totally non-standard (horizontal - just to mess with the old-timers) and will

override the video output. These test bars are 75% IRE. Use the test bars for…testing.

A Cautionary Note: In the event that the rotary switch was moved from “0” and left on “C” - RESET - RESTORES TO FACTORY DEFAULTS, and is power cycled, all data

will be lost. Sometimes a RESET is required, but those occasions are generally few and far between. On the web pages, a warning dialog box was added to inform the administrator the state of the switch. If the factory reset is not desired, please move the switch back to “0” and do not power cycle the camera. The warning looks almost exactly like the warning below…

TEP BY STEP INSTRUCTIONS TO INSTALL THE WALL

VIEW HD-USB SR C

AMERA SYSTEM

Step 1: Locating the Camera

Locate the camera mounting position while paying close attention to camera viewing angles, lighting conditions, possible line of site obstructions, and checking for in-wall obstructions where the camera is to be mounted. Pick a mounting location to optimize the performance of the camera.

Like all Vaddio WallVIEW systems, the WallVIEW HD-USB SR is easy to install and operate. The product was specifically designed with CAT-5 cable connectivity for the extension of power and an Active USB 2.0 Extension cable that is powered by the computer’s USB port.

Step 2:

After determining the optimum location of the camera system, run a CAT-5 cable and the Active USB 2.0 Extension Cable from the computer location to the camera location. Make sure to mark and test the CAT-5 cable and use real RJ-45 crimper and connectors using the 568B straight-through wiring standard. Please do not use the “feed-thru” type RJ-45 connectors for professional installations.

Step 3:

Using the CONCEAL wall mount directions, install the CONCEAL mount. If mounting to the drywall with wall anchors, use four (4) quality wall anchors. Make sure to level the mount and tighten the mounting screws.

Step 4:

Connect the CAT-5 cable to the EZ POWER VIDEO RJ-45 port on the back panel of the HD-USB camera. Connect 1’ (305mm) USB 2.0 Cable Type-B Male into the USB Type-B Female on the back panel of the HD-USB camera. Connect the Active USB Extension Cable’s Type-A Female to the 1’ (305mm) USB cable’s Type-A Male Connector. Field dress the cabling and tuck it back into the CONCEAL mount and place on the back cover to hide all the cabling.

NOTE: Check all Cat-5 cables for continuity in advance o f the connection. Do not plug the Cat-5 cable into any other RJ-45 port but the EZ POWER VIDEO port. Th ere is 24 VDC Volts on Pin s 1 & 2. Plugging into any other port may cause damage to the camera system and void the warranty.

Step 5: At the Head-End

Plug the Active USB Extension Cable Type-A Male directly into the computer. Plug the other end of the CAT-5 cable into the RJ-45 port of the Power Extension Module.

WallVIEW HD-USB

with CONCEAL Mount

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 13 of 40

Page 14

WallVIEW HD-USB SR Camera System

Step 6: Last Chance to check the wiring

After double checking the wiring, plug the 24 VDC power supply into the Power Extension Module and plug the power supply into the power outlet. The HD-USB camera should home and also should be sending USB 2.0 MJPEG video to the computer.

Hint: It may be a good idea to set up the camera “on the grou nd” to ensure that it works properly and all the computer and camera settings are correct prior to installing it on the wall with the CONCEAL mount.

COMPATIBILITY

The HD-USB PTZ Camera will work with the following web browsers, soft codecs, computer operating systems and media players.

Compatibility - Web Browsers:

1) Internet Explorer (IE 8 and above)

2) Safari (Rev 4 and 5)

3) Safari/iOS (Rev 4 and 5)

4) Chrome (the latest and current release - auto updating)

5) Firefox (the latest and current release - auto updating)

Compatibility - Soft Codecs: HD-USB Camera is compatible with the following soft codecs or applications, in no particular order:

Release 2.0.x:

1) Skype Win 7 & Mac OS X

2) Web Ex (WBS 28.7 and up) Win 7 & Mac OS X

3) Microsoft Lync Win7

4) Cisco Jabber Win 7 & Mac OS X

5) Vidyo Desktop Win 7 & Mac OS X

6) Google Plus Win 7

7) Adobe Connect 8 Win 7 & Mac OS X

8) LifeSize ClearSea Win 7

9) GoToMeeting (Citrix) Win 7 & Mac OS X

10) Polycom M100 Win7

11) Panaopto (lecture capture) Win 7

3.4.3: Compatibility - Operating Systems

1) Apple OS X (10.7 and above)

2) Windows XP w/Service Pack 3 with known issues and errata

3) Windows 7

4) Linux

3.4.1: Compatibility - Media Players:

The UVC with MJPEG and IP with H.264 video are compatible with the industry leading PC media players.

1) Quick-Time

2) Real Player

3) VLC Media Player

Evolving Compatibilities:

As more UC soft-client and lecture capture programs are released and gain popularity, Vaddio will provide a continuing research and development effort to ensure the camera’s viability and compatibility with other manufacturer’s products.

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 14 of 40

Page 15

WallVIEW HD-USB SR Camera System

Supported UVC Resolutions

The USB 2.0 UVC (Universal Video Class) video driver resolution table is basically an internal list of resolutions available for the Host PC and the Camera to negotiate and use for a specified application. Typically, the highest resolution possible between both the PC and camera is used. However, not all OS and application combinations are typical. Some applications are assigned to a lower value, or the lowest resolution to purposely minimize the bandwidth requirement. In order to avoid selection of the smallest resolution possible, the resolutions of 160 x 120 and 160 x 90 were removed from the camera due to the selection of the lowest resolution by some UC Clients and because it looked sort of wicked awful (in some respect s).

Table: Supported UVC Resolutions

Format Resolution Frame Rate Aspect Ratio

MJPEG

1280 x 720 15/30 16:9

960 x 544 15/30 16:9 704 x 576 15/30 4:3 640 x 480 15/30 4:3 640 x 360 15/30 16:9 424 x 240 15/30 4:3 352 x 240 15/30 4:3 320 x 240 15/30 4:3 320 x 180 15/30 16:9

YUY2

640 x 480 10 4:3 640 x 360 10 16:9 424 x 240 15/30 4:3 352 x 240 15/30 4:3 320 x 240 15/30 4:3 320 x 180 15/30 16:9

Keyboard Hot Keys for PTZ functions:

The keyboard hot keys can control the Pan/Tilt/Zoom functions of the HD-USB Camera when using the Camera Control Web Page (shown in the next section). The table below explains operation.

Table: Keyboard Hotkeys

Function Hot Key Function Hot Key

Zoom IN + (plus) Zoom OUT - (minus) Tilt Up Num. Pad Key 8, Up Arrow Tilt Down Num. Pad Key 2, Down Arrow Pan Right Num. Pad Key 6, Right Arrow Pan Left Num. Pad Key 4, Left Arrow

NOTE: Shift key not required for + and - keys on number row. Caps Lock can be ON or OFF. Num Lock must

be off to use the Numeric Keypad for pan and tilt.

Tilt Up & Pan Right Num. Pad Key 9, PgUp Tilt Down & Pan Right Num. Pad Key 3, PgDn Tilt Up & Pan Left Num. Pad Key 1, End Tilt Down & Pan Left Num. Pad Key 7, Home

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 15 of 40

Page 16

WallVIEW HD-USB SR Camera System

NTERNAL WEB PAGES AND CONTROL

The internal web pages will allow control of the HD-USB and allow the user to control the camera via an internet connection. These built-in web pages will allow the user or administrator to set security passwords, change the IP address if not dynamic, view diagnostics, access the firmware upgrade page and more.

To access the HD-USB’s web pages, first include your Network Administrator for the network that the camera will be placed. Access to the internal web pages can be achieved three ways for set-up of the HD-USB’s IP address and other administrative functions.

DHCP Set-up (Dynamic Host Configuration Protocol)

DHCP Set-up (skip this section if Static IP). If the LAN has a DHCP (dynamic host configuration protocol) server, then the IP address, gateway and routing information will automatically be assigned. The HD-USB software is defaulted to DHCP. To find out the assigned IP address please have the network administrator provide the IP address and enter that into one of the approved browsers.

The HD-USB will attempt to dynamically obtain an IP address using DHCP, but it will fall back to the default address of 169.254.1.1 if no DHCP server can be found.

To display the HD-USB’s IP Address:

1) Plug in the camera and let it go through the boot up procedure. The IP Address will be displayed at the top and middle of the screen for 15 seconds and then automatically turns off.

To see the IP address for longer than the 15 seconds at boot up, then…

2) Pick up the Vaddio IR Remote Commander and find the Data Screen button.

3) Press and hold the Data Screen button on the remote for 4 seconds.

4) The IP Address will appear on the display. The system is capable of displaying and address up to 15 characters arranged in the format: xxx.xxx.xxx.xxx. The default static IP address for the HD-USB camera is

169.254.1.1.

5) To turn off the IP Address display, press and hold the Data Screen button for 4 more seconds or until the IP Address turns off.

Displaying the IP address for the network administrator is advantageous especially in a network that is DHCP. It makes it easier to find the camera on the network and assign addresses permanently within the DHCP protocol. Whatever protocols are used, always have the network administrators available when attaching the Vaddio HD-USB camera to the Ethernet network.

Notes: The Data screen button is also used for the Camera’s on-screen display where many of the camera’s parameters can be set. It is easy to tell the difference between these modes as one quick touch enters the OSD for the camera and a four second press and hold displays the web address and turns off the web address display.

The IP Address will be displayed on screen out of the composite video, analog component video (YPbPr) and the USB output. It will display at the top, middle of the screen to ensure that older 4:3 displays can show the address as well as the prevalent 16:9 monitors.

Connect to the Local Area

Network or to a computer

with a Cross-over cable

Data Screen Button

IP Address

169.254.1.1

Simulated IP Address On-Screen Display

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 16 of 40

Page 17

WallVIEW HD-USB SR Camera System

Static IP Set-up:

It is highly recommended that the Network Administrator and/or network personnel are involved on the Static IP set-up of the HD-USB camera. Please do not try to set the Static IP of the camera without help from network personnel…please?

The static IP can be assigned either through the network or directly to a computer using a cross-over cable. Depending on the age of the computer, you may not need a cross-over cable. Either way the steps are the same for network or direct connect to a computer.

The default address of the HD-USB camera is 169.254.1.1 and the Subnet mask is 255.255.0.0. Different computer OS types all have their own way of doing things (without question), but they are essentially doing the same stuff, changing the IP address so the web pages of the HD-USB are accessible.

Examples (directly connected to a computer for set-up):

For Windows XP Pro, the routine to get to the network settings is fairly simple. Click on the Start button > Control Panels > Network Connections > Right Click Local Area Connection > click on Properties > click on Internet Protocol (TCP/IP) > click on Properties and IP Address and Subnet Mask numbers are displayed. It is best to record the addresses that are in the computer so they can be re-assigned when the operation is finished. Enter

169.254.1.2 (which is the default address 169.254.1.1 plus 1) and Subnet mask is 255.255.0.0 and click OK > and

then OK again. Bring up one of the approved web browsers (like Chrome) and enter http://169.254.1.1 and the Log-in page will appear.

With Apple OS X (10.7 and above), the steps are a bit different but essentially the same…Go to > System Preferences > Network > Ethernet > Configure IPv4: Manually > Enter in 169.254.1.2 and Subnet mask of

255.255.0.0 and click Apply. Bring up one of the approved web browsers (like Safari) and enter http://169.254.1.1

and the Log-in page will appear. Windows 7 has its own set-up that is a bit different from Windows XP Pro, but similar in that the whole purpose of

the Static IP first time set up is to give the HD-USB PTZ Camera an address that can be used over and over again by users or administrators to control the camera.

The Login Page will appear if there is a user name assigned by the administrator.

Assigning a user name can limit access to the admin menus by a general user.

By default, the password for the User account is: password.

The Administrator can set the name and password for the User account.

If no user name is assigned, the web page will automatically open to the IP Control page.

User name is blank (assigned by admin)

Password is: password

Admin name is: admin Password is: password

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 17 of 40

Page 18

WallVIEW HD-USB SR Camera System

CREEN SHOT TOUR

The Camera Control page (functions called out below).

1) Pan, Tilt and Home Controls: These intuitive controls use the up/down arrows for camera tilt, the left/right arrows for camera pan and the center button to move the camera to the home position.

2) Zoom Control: The camera’s zoom lens can be controlled with the “+” to zoom-in and the “-“to zoom out.

3) Pan/Tilt and Zoom Speed Controls: The speed for both the Pan/Tilt and Zoom controls can be adjusted for with the two (2) buttons in this section. For tighter shots, it is recommended that the slower speed is used.

4) Store Preset Button: Clicking the Store button opens up a Store Preset pop-up dialog box. To set presets,

set up the camera shot, click on choice of preset number (1 through 6). The preset is stored and the dialog box closes.

5) Camera Presets: Six (6) presets can be recalled simply by clicking a preset number.

6) Administration Menu: Clicking on the Administration menu bar, the Admin Log-in screen will appear. The default Admin password is: password.

7) Vertical: The vertical button will reduce the size of the window for the user controls and remove the menu

tabs on the left side of the screen. The vertical sizing works well when using it with a soft-client codec. Examples of the vertical box are at the end of the tour.

➐

➏

➊

➋

➌

➍

➎

Store Preset pop-up menu dramatization

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 18 of 40

Page 19

WallVIEW HD-USB SR Camera System

Admin Pages: Clicking on the Admin link button will open the Log-in window. Enter the default password (password) on this line and click on Log-in.

After Login, the Admin link buttons are exposed and include Streaming, Labels, Networking, Security, Diagnostics, System, Help and Logout Admin.

◄

◄ ◄

◄

Password is: password

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 19 of 40

Page 20

WallVIEW HD-USB SR Camera System

Streaming: The Streaming Menu allows an administrator to set up the type of streaming, color depth, video speed and quality, protocol and path.

The Streaming Menu:

1) The Streaming mode is set for either USB 2.0 streaming (MJPEG) or IP streaming (H.264); however the HD-USB cannot do both at the same time. It can stream USB and accept IP control, or it can IP stream with IP control. Choose the streaming mode here.

2) USB Image Settings allows the admin to set a “friendly” name allowing each system to have its own identity. This is handy for a user that uses several rooms. It also allows the admin to reduce the color depth to 4:2:0, which is used with the older/cheaper webcams and applications, where image quality is not as critical. The 4:2:2 color is used by many applications that take advantage of the performance of the camera where the colors are more vivid.

3) The IP Streaming - Video Settings allow the selection of the target performance for the IP Streaming. The HD-USB camera is set up for a variable bit rate, which is much simpler to use. The user can select the resolution and the quality, such as High Quality (Best), Standard Quality (Better) and Low Bandwidth (Good). Every effort to elimina te bad combinations with the 5 or 6 parameters that make up the image size, quality, rate etc… has been made, so you can’t pick 1080p at a bit rate of 128Kbps, which would look totally wicked awful - and probably wouldn’t work anyway.

4) The IP Streaming Protocol also allows the admin to choose the streaming type and the port number for RTSP. The HLS port is always on 80. The supported protocols are RTSP and HLS (Apple’s HTTP Live Streaming). RTSP is best for live applications, where HLS serves the Apple iOS devices and is better for playback due to the amount of buffering the HLS has built-in. The Streaming URL auto populates and that path can be changed.

5) When finished setting up the streaming parameters, click on save to put the changes into effect or cancel to……cancel it.

◄

➊

➋

➌

➍

➎

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 20 of 40

Page 21

WallVIEW HD-USB SR Camera System

Room Labels: The Room Labels menu allows the administrator to label the company name, room name, room phone and help phone on a per camera basis. The labels appear on every page at the top/middle of the page. Simply enter the room information and click Save.

By clicking on the Networking link button, the Network Configuration and Network Interfaces are displayed. This is where the Network administrator assigns either DHCP or a Static address and the associated parameters.

◄

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 21 of 40

Page 22

WallVIEW HD-USB SR Camera System

If Static IP is chosen, a new menu “pops up" where the IP Address, Subnet Mask and Gateway are entered. Click on Save to keep the Static IP information.

By clicking on the Security link button, the UPDATE “user” PASSWORD and UPDATE “admin” PASSWORD control sections are displayed. The default “user” password is: password. The default “admin” password is also: password. The Network administrator can reassign the user name and password as well as the Admin password. There is only one “user” password and one “admin” password at any given time.

◄

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 22 of 40

Page 23

WallVIEW HD-USB SR Camera System

By clicking the Diagnostics link button, a set of self-diagnostics will be displayed. These diagnostics may help the Vaddio technical support team diagnose a problem with the HD-USB camera.

The System link button is where the Firmware Updates will be loaded. There will be several firmware updates and upgrades over the life of the camera. Click “Show more” for detail about the current software. A Reboot button and a Restore Factory Settings control rounds out the System Page.

◄

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 23 of 40

Page 24

WallVIEW HD-USB SR Camera System

By clicking on “Show more…” the software versions are displayed. To update the firmware files, chose the appropriate file and click on Begin Firmware Update. When in doubt, call Vaddio Tech Support for assistance.

After clicking on “Begin Firmware Update…” a confirmation pop-up and warning will be displayed. Please contact Vaddio Tech support for directions or assistance. Please read and completely understand the pop-up warnings as it is easy to lose patience waiting for updates. If the update is interrupted, it is never really ever a good thing.

◄

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 24 of 40

Page 25

WallVIEW HD-USB SR Camera System

After the firmware load has been started, a pop-up screen will advise patience and notify, in terms of a percentage completed, the progress of the firmware load. Please do not interrupt the firmware load.

Service/Help information can be found under the Help tab. Support phone numbers and e-mail, manuals, FAQ’s and System information is listed on this page. Have this page open when calling Vaddio Tech Support.

◄

TECHNICAL SUPPORT NOTE: Please work with your Network Administrator prior to calling Vaddio for technical su pport. Please have on-site network personnel initiate tech support calls with Vaddio only.

◄

See next page for “Vertical”

◄

button function.

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 25 of 40

Page 26

WallVIEW HD-USB SR Camera System

Finally, the Vertical button at the top right of the camera control page reduces the size of the camera control window and drops the menu bars to allow the controls to be open and on screen along with any soft-codec application without taking up too much space. This control page can be sized with the mouse, moved around the screen and minimized to not block any part of the screen. The Full button returns the web page to normal size.

Click on full to go back to full sized

◄

web pages

CONNECTING THE CAMERA TO THE PROGRAM OF CHOICE:

The HD-USB PTZ Camera is compatible with many programs and media players. The following is an attempt to generally describe the steps to plug in the HD-USB camera and get an image.

Skype Example

1) First, with a quality USB 2.0 cable, plug the USB-B port of the camera to the USB-A port of the computer. A pop up window on the computer monitor will display the following:

a. Found ClearVIEW HD-USB b. Found USB Composite Device c. Found USB Video Device

2) Open Skype and perform the following steps:

a. Open the Tools Menu and drop down to Options b. Click on Video Settings and under Webcam choose USB Video Device

The systems will negotiate the highest resolutions possible, depending on the computer speed, network quality, cabling etc..., and display the video signal of the camera. The camera can be controlled with the supplied Vaddio IR Remote Commander or through IP as described earlier through the came ras web pages.

Make a test call to ensure the system is working properly.

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 26 of 40

Page 27

WallVIEW HD-USB SR Camera System

VLC Media Player Example

1) Same first step as above.

2) Open VLC Media Player and perform the following steps:

a. Click on the Media menu and drop down to Open Capture Device and click it. b. Under Device Name, go to the Video Device Name drop down and choose USB Video Device. c. Under Options, enter the Video Size as 1280x720 d. Click on Play e. From there, VLC needs some instruction on the aspect ratio, so click on Tools and drop down to

Aspect Ratio and drop down again to 16:9 for 720p (1280x720).

VLC is a powerful record/playback system and buffers the images so you will notice some delay in the way VLC displays the image.

Generally…

With all the compatible software available, in general terms, the video device, aspect ratio, and resolution may need to be set manually the first time through initial set-up. Some systems are easier than others (like Skype) and others are more technical in nature and tend to do more stuff (like VLC).

TECHNICAL SPECIFICATIONS:

Part Numbers 999-6994-00 0 North Ame rica, 999-6994-001 International

Video Outputs

USB Interface Connector: Type-B, USB 2.0 Compliant, Supported Drivers: Standard UVC device (no custom drivers) Network Interface Connector: RJ-45, 10/100 Base-T, Supported Protocols: RTSP Streaming, HLS Streaming (apple’s variant

H.264 Resolutions (Release 2.0.x)

User Control Vaddio IR Remote Commander, On Screen Display for camera set-up, RS-232, Ethernet (web page) Supported Media Players Windows Media Player, Apple Quick-Time and VLC Media Player Supported Browsers Internet Explorer 8 & 9, Safari 4 &5, Safari/iOS, Chrome, Firefox Image Sensor 1/3-Type Exmor High-speed, Progressive Scan CMOS Sensor with 1.3 Megapixels Minimum Illumination 0.7 LUX (F1.6, 50IRE) Lens/ Focal Length 19X Optical Zoom, F=4.5mm wide to 85mm tele (F1.6-F2.9), Min. Focus Distance 1.0m Horizontal Viewing Angle 58.1° Wide End to 3.2° Tele End - 16:9 Format Pan Range Pan: +170 degrees to -170 degrees, Tilt: +90 degrees to -30 degrees, Invertible for Ceiling Mount Preset Positions 16 (internal), 6 recalled via IR Remote Power Extension Module Includes

Active USB 2.0 Extension Cable P/N: 440-1005-020 Jargy/Mobile Computing 20m (65.6’) Port Powered USB 2.0 Extension Cable

General Information Operating Temperature 32° to 104° F (0° to 40° C) / 20% to 80% Relative Humidity Dimensions / Weight 7.81” (198.37mm) H x 6.67” (169.42mm) W x 7.057” (179.25. mm) D / 6.04 lbs. (2.7397kg.) Software Release

Information (see release notes)

 USB 2.0 (MJPEG)

o Resolution up to 720p/30 USB 2.0 (MJPEG) o Color Space 4.2.2 or 4.2.0 o Use “HD VIDEO SELECT” rotary switch positions ‘0’ (720p/59.94) for USB.2.0 Video o H.264 (IP): Resolution up to 1080p/30 (H.264 over IP & USB 2.0 - Firmware Release 2.0.x)

 Analog Component (YPbPr),

o Analog resolutions up to and including 1080p/60 (YPbPr)

 CVBS - Analog only

o 480i and 576i (4:3, LB and SQ)

of HTTP streaming) - Release 2 CIF, 640x480 (VGA), 480p, 720p/30 1080p/30 (1080p Ethernet only)

 Power Extension Module with 5.5mm OD x 2.5mm ID coax power connector  24 VDC, 2.75 Amp switching power supply (100V-240V, 50 to 60 Hz) with power cable

Connectors: Type-A Male for Host Side, Type-A Female for device side 1’ (305mm) Type-B Male to Type-A Male USB 2.0 cable included (see Diagrams)

Release 1.0.x: Includes USB 2.0 Outputs and Analog Outputs simultaneously on and ready to use. Ethernet control via an internal web page and upgrading software capability is active. Release 1.2.x: Improvements, additions to functionality, Telnet control, UC client compatibility and UVC resolutions. Release 2.0.x: H.264 Streaming activated on network port.

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 27 of 40

Page 28

WallVIEW HD-USB SR Camera System

COMPLIANCE AND CE DECLARATION OF CONFORMITY: CLEARVIEW HD-USB PTZ CAMERA

Compliance testing was performed to the following regulations: FCC Part15, Sections 15.107, 15.109 Subpart B Class A

ICES-003 ISSUE 4, 2004 Class A EN55022 A1 2007 Class A EMC Directive 2004/108/EC Class A IEC 60950-1:2005 (2nd Edition); Am 1:2009 Class A EN 60950-1:2006+A11:2009+A1:2010+A12:2011 Class A



FCC Part 15 Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15, Subpart B, of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment.

ICES-003 Compliance ICES-003, Issue 4: 2004

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux appareils numeriques de la classe B préscrites dans le Règlement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada.

European Compliance

This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for Emissions a nd Immunity and meets the requirements for a Class A digital device. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Standard(s) To Which Conformity Is Declared: EMC Directive 2004/108/EC

EN55024/A2:2003 Information Technology Equipment

Immunity Characteristics Limits and Methods of Measurement

 EN 61000-4-2: 1995 + Amendments A1: 1998 + A2: 2001 Electrostatic Discharge  EN 61000-4-3: 2006 + A1: 2008 Radiated Immunity  EN 61000-4-4: 2004 + Corrigendum 2006 Electrical Fast Transients  EN 61000-4-5: 2006 Surge Immunity  EN 61000-4-6: 2009 Conducted Immunity  EN 61000-4-8: 2010 Power Frequency Magnetic Field  EN 61000-4-11: Second Edition: 2004 Voltage Dips, Interrupts and Fluctuations  IEC 60950-1:2005 (2nd Edition); Am 1:2009 Information technology equipment - Safety  EN 60950-1:2006+A11:2009+A1:2010+A12:2011 Information technology equipment - Safety

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 28 of 40

Page 29

WallVIEW HD-USB SR Camera System

WARRANTY INFORMATION: (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details):

Hardware* Warranty: T wo (2) year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio

warrants its manufactured products against defects in materials and workmanship for a period of two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such defects during the warranty. Vaddio, at its option, will repair or replace products that prove to be defective. Vaddio manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry standard practices.

Exclusions: The above warranty shall not apply to defects resulting from improper or inadequate maintenance by the customer, customers applied software or interfacing, unauthorized modifications or misuse, mishandling, operation outside the normal environmental specifications for the product, use of the incorrect power supply, modified power supply or improper site operation and maintenance. OEM products and products manufactured by other companies are excluded and are covered by the manufacturer’s warranty.

Vaddio Customer Service: Vaddio will test, repair, or replace the product or products without charge if the unit is under warranty. If the product is out of warranty, Vaddio will test then repair the product or products. The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to repair. All components must be returned for testing as a complete unit. Vaddio will not accept responsibility for shipment after it has left the premises.

Vaddio Technical Support: Vaddio technicians will determine and discuss with the customer the criteria for repair costs and/or replacement. Vaddio Technical Support can be contacted through one of the following resources: e-mail support at support@vaddio.com or online at vaddio.com.

Return Material Authorization (RMA) Number: Before returning a product for repair or replacement request an RMA from Vaddio’s technical support. Provide the technician with a return phone number, e-mail address, shipping address, product serial numbers and original purchase order number. Describe the reason for repairs or returns as well as the date of purchase. See the General RMA Terms and Procedures section for more information. RMA’s are valid for 30 days and will be issued to Vaddio dealers only. End users must return products through Vaddio dealers. Include the assigned RMA number in all correspondence with Vaddio. Write the assigned RMA number clearly on the shipping label of the box when returning the product. All products returned for credit are subject to a restocking charge without exception.

Voided Warranty: The warranty does not apply if the original serial number has been removed or if the product has been disassembled or damaged through misuse, accident, modifications, use of incorrect power supply, use of a modified power supply or unauthorized repair.

Shipping and Handling: Vaddio will not pay for inbound shipping transportation or insurance charges or accept any responsibility for laws and ordinances from inbound transit. Vaddio will pay for outbound shipping, transportation, and insurance charges for all items under warranty but will not assume responsibility for loss and/or damage by the outbound freight carrier. If the return shipment appears damaged, retain the original boxes and packing material for inspection by the carrier. Contact your carrier immediately.

Products not under Warranty: Payment arrangements are required before outbound shipment for all out of warranty products.

Other General Information: Care and Cleaning

Do not attempt to take this product apart at any time. There are no user-serviceable components inside.

 Do not spill liquids in the product  Keep this device away from food and liquid  For smears or smudges on the product, wipe with a clean, soft cloth  Use a lens cleaner on the lens  Do not use any abrasive chemicals.

Operating and Storage Conditions:

Do not store or operate the device under the following conditions:

 Temperatures above 40°C (104°F) or temperatures below 0°C (32°F)  High humidity, condensing or wet environments  In swimming pools or pine forest  In inclement w eather  Dry environments with an excess of static discharge  In a mixture of silicon caulk and metal shavings (considered liquid)  Under severe vibration

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 29 of 40

Page 30

WallVIEW HD-USB SR Camera System

APPENDIX 1: COMMUNICATION SPECIFICATION

Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control

12345678

NOTE: The Vaddio ClearVIEW HD-USB Control Protocol is similar, but not identical to the Sony® VISCA™ command set and is not compatible with Vaddio Joysticks. This is an abbreviated Command set intended to give external control systems basic control over the camera. This list is not the same list as found in the other ClearVIEW (HD-18, HD-19 and HD-20) cameras.

HD-USB Command List

Command Set Command Command Packet Comments

Address Set Broadcast 88 30 01 FF Address Set (Daisy chain) IF_Clear Broadcast 88 01 00 01 FF IF Clear Command Cancel 8x 2p FF p:socket number(1,2) CAM_Power On

Off(Standby)

CAM_Zoom Stop

Tele(Standard) Wide(Standard) Tele(Variable) Wide(Variable) Direct Direct(Variable)

CAM_Focus Stop

Far(Standard) Near(Standard) Far(Variable) Near(Variable) AutoFocus ManualFocus Auto/Manual Direct

CAM_Backlight On

Off

CAM_Memory Reset

Set Recall

Pan-tiltDrive Up

Down Left Right UpLeft UpRight DownLeft DownRight Stop Absolute Position

Home Reset

Tally On

Off

Preset Pan Speed Pan/Tilt/Zoom Speed 81 01 7E 01 0B WW SS ZZ FF WW: Pan Speed (0x01-0x18)

*Zoom and Focus Data:

CAM_Zoom: Range(0x000–0x6B3) CAM_Focus: Range (0x000-0xC000) dependent on Zoom Position

**Additional Information:

Pan Range: 8044 – 7FBC (-32,700 to +32,700) Tilt Range: E891 – 4C2B (-5,999 to +19,499)

8x 01 04 00 02 FF 8x 01 04 00 03 FF

8x 01 04 07 00 FF 8x 01 04 07 02 FF 8x 01 04 07 03 FF 8x 01 04 07 2p FF 8x 01 04 07 3p FF 8x 01 04 47 0p 0q 0r 0s FF 8x 01 7E 01 4A 0v 0p 0q 0r 0s FF

8x 01 04 08 00 FF 8x 01 04 08 02 FF 8x 01 04 08 03 FF 8x 01 04 08 2p FF 8x 01 04 08 3p FF 8x 01 04 38 02 FF 8x 01 04 38 03 FF 8x 01 04 38 10 FF 8x 01 04 48 0p 0q 0r 0s FF

8x 01 04 33 02 FF 8x 01 04 33 03 FF

8x 01 04 3F 00 0p FF 8x 01 04 3F 01 0p FF 8x01 04 3F 02 0p FF

8x 01 06 01 VV WW 03 01 FF 8x 01 06 01 VV WW 03 02 FF 8x 01 06 01 VV WW 01 03 FF 8x 01 06 01 VV WW 02 03 FF 8x 01 06 01 VV WW 01 01 FF 8x 01 06 01 VV WW 02 01 FF 8x 01 06 01 VV WW 01 02 FF 8x 01 06 01 VV WW 02 02 FF 8x 01 06 01 VV WW 03 03 FF 81 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF 8x 01 06 04 FF 81 01 06 05 FF

8x 01 7E 01 0A 00 02 FF 8x 01 7E 01 0A 00 03 FF

Pin # RJ-45 RS-232 and IR Out Pins

1) Unused

2) Unused

3) Unused

4) Unused

5) Unused

6) GND (GND of IR Short Range - Pin 3)

7) RXD (from TXD of control source)

8) TXD (to RXD of control source)

Power On/Off

pqrs: Zoom Position* v:(Speed) 0-7

pqrs: Focus position*

p:Memory No(=0-0xe) WW: Pan Speed (0x01-0x18)

VV:Tilt Speed(0x01-0x14)

YYYY: Pan Position** ZZZZ: Tilt Position**

SS:Tilt Speed(0x01-0x14) ZZ:Zoom Speed(0-7);

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 30 of 40

Page 31

WallVIEW HD-USB SR Camera System

HD-USB Inquiry List

Inquiry Command Command Response Packet Comments

CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF

y0 50 03 FF CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqr: 0-0x6B3 CAM_FocusPosInq 8x 09 04 48 FF y0 50 0p 0q 0r 0s FF pqrs: Focus Position CAM_BacklightModeInq 8x 09 04 33 FF y0 50 02 FF

y0 50 03 FF CAM_MemoryInq 8x 09 04 3F FF y0 50 0p FF p:Preset 0-0xf Pan-TiltMaxSpeedInq 8x 09 06 11 FF y0 50 pp qq FF pp:Pan 0x01-0x18

Pan-tiltPositionInq 8x 09 06 12 FF FF y0 50 0p 0p 0p 0p 0q 0q 0q 0q FF pppp: Pan 0x8044-0x7FB2

TallyInq 8x 09 7E 01 0A FF y0 50 02 FF

y0 50 03 FF PresetSpeedInq 8x 09 7E 01 0B FF y0 50 pp qq rr FF pp:Pan 0x01-0x18

Motor Config 8x 09 7E 01 70 FF y0 50 00 FF

y0 50 01 FF

On Off(Standby)

On Off

qq:Tilt 0x01-0x14

qqqq: Tilt 0xE890-0x4C2C On

Off

qq:Tilt 0x01-0x14 rr:Zoom 0x00-0x07

Hard Motor Stops Soft Motor Stops

FIRMWARE VERSION 2.1.0 RELEASE NOTES:

Component Version

Database 2.1.0 Middleware 2.0.0

New Features and Functions

 Under the USB Streaming section the USB Device Name was added, which allows the admin to use a friendly

name for the camera. The camera will be listed as a UVC Camera in the device manager without this function and moving from room to room in the enterprise with multiple systems or controlling two cameras in a single room, is not exactly easy. The friendly name is preferred over a generic term for firms with more than one camera.

 The camera’s scaler for lower resolutions has been improved. The HD-USB camera is optimized for HD

video, and some applications scale the video down significantly from 720p to 360p and even as low as 180p. Some improvements were made to accommodate these lower resolutions.

 A system reboot function and a return to factory defaults were added to the webpages for additional

convenience especially when managing the camera over the intern et.

Fixed Issues

 Mac OS 10.8.X and 10.9 Compatibility: This release fixed an USB video streaming compatibly issue with

Mac’s Mountain Lion and Maverick operating system. In release 2.0.0, the USB video strea m could stop or freeze when a software application requested video resolution changes on Mac’s running Mountain Lion or Maverick operating systems. Release 2.1.0 fixes the interoperability problem and will no longer freeze up.

FIRMWARE VERSION 2.0.0 PREVIOUS RELEASE NOTES:

Component Version

Database 2.0.0 Middleware 2.0.0

New Features & Functions

Release 2.0 includes the Real Time Streaming Protocol (RTSP) or HLS (Apple’s RTSP or HLS IP Streaming: variant on HTTP streaming) for IP Streaming of the camera’s video signal. The IP streaming is configurable within the camera’s internal web server. The camera can be configured as either USB or IP streaming device, however not simultaneously.

: The ClearVIEW USB has an expanded color space range for USB 2.0 streaming Improved USB Colors

creating a vivid HD image with blacker black and whiter whites.

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 31 of 40

Page 32

WallVIEW HD-USB SR Camera System

Serial Command API Updates: Added new serial commands for setting streaming functions f rom Teln et client. Fixed Issues: N/A

Known Issues:

IP Streaming: Video quality of IP stream will degrade with more than one media player directly connected to the

camera’s IP stream. This is a processor limitation on the streaming engine within the camera and is normal. For many participants, please use a CDN.

Sharpness Setting on Camera: Sharpness setting on HD-USB Camera can create scaling artifacts with UC

clients using low resolution video (lower than 480p). The root cause of image artifacts are related to the MJPEG decoder in some UC soft-clients. The sharpness can be disabled on the camera from the IR remote. Press Data Screen and navigate to Special >Image Adj > Sharpness, then disable sharpness. This should reduce scaling artifacts (“the jaggies”) with some software clients using low resolution video.

RTSP Port The RTSP port can be assigned on the internal web pages as 554, or between the ranges of 1024 :

to 65535. Other ports are reserved for internal purposes.

Interoperability Testing & Findings

The following interoperability testing was performed for this release. A detailed list of all interoperability findings can be found in the EasyUSB Tools Interoperability FAQ document.

Table: HD-USB PTZ Camera and UC Client Software Interoperability Testing

Software Client Tested Version Major Findings Comment

Cisco Jabber Web Ex

Skype

Adobe Connect

Microsoft Lync Gotomeeting (Citrix)

idyo Desktop Polycom M100 LifeSize ClearSea Google Plus Panopto Quick Time Media Player

LC Media Player Real Player

4.4 None

WBS 28.7 None Must have WebEx client version 28.7 to

work with Vaddio USB Video Products. AV Bridge color space should be set to 4:2:0

6.0 720p only supported on Skype Certified Camera

9.0.1 UVC Conflict with some builtin Laptop Cameras

4.0.7 None No Comment (N/C)

5.4 None N/C

2.2.1 None Certified with VidyoRoom 2.2.2.x

1.0.4 None N/C

8.2.0 None N/C

N/A None N/C

4.2.5602 None N/C

10.2 None N/C

2.0.4 None N/C

16.0 None N/C

Workaround for HD by downloading shareware to force HD. MAC version of Connect squeezes to 4:3 aspect ratio.

HD-USB IP Streaming Interoperability Testing

Media Player Test Version Major Findings Comment

QuickTime Media Play

Real Player

LC Media Player WOWZA Media Server

10.2 (MAC)

7.7 (Win 7)

16.0 Real Player uses QuickTime for a decoder

2.0.x None N/C

5.4 None Tested as push-stream to

Direct X plugins may need to be disabled on Windows in order to accept the RTSP stream.

Note: QuickTime does not support PCM audio.

and launches a small video window.

N/C

WOWZA via RTSP

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 32 of 40

Page 33

WallVIEW HD-USB SR Camera System

Windows Media Player Note: Windows Media Player is not compatible with standard RTSP streams. It will not play IP streams originating from the HD-USB camera, AV Bridge encoder or any other RTSP streaming device.

NO RUG PULLING

Backward Compatibility:

The Rev 2.1.0 and up software will not allow device to be downgraded to previous versions.

PREVIOUS RELEASE NOTES:

Firmware Version 1.2.0 Release Notes: ClearVIEW HD-USB PTZ Camera

Component Version

Database 1.2.0 Middleware 1.2.0

Note: Most of the version 1.2.0 Release notes have been added to the body of the manual as the data is important to the operation of the HD-USB camera. The notes listed below are the highlights of the Firmware Release 1.2.0.

 New Features and Functions:

WebEx Compatibility: The video compatibility problem between HD-USB and WebEx has been resolved with a new software release of the WebEx client. Version WBS 28.7 and above is compatible with Vaddio USB devices.

 Improved Interoperability with Various UC software Clients: Additional USB video resolution support was

added to the UVC endpoint to improve video quality for some UC soft clients that only use standard definition video resolution.

 Keyboard Hot Keys: Keyboard hot keys were added for the Pan/Tilt/Zoom functions on the Camera Control

Web Page. The Shift key not required for + and - keys on number row. Caps Lock can be ON or OFF. Num Lock must be off to use the Numeric Keypad for pan and tilt.

 USB Color Space Option: A user configurable option for setting the video color space to 4:2:0 or 4:2:2 was

added to the Web Pages. It was noted that using the 4:2:0 color space will reduce USB bandwidth by up to

25.763413125463% and may improve video quality with some UC soft clients.

 Telnet Command API: A Telnet Client to the HD-USB Camera was added for control via the network. This

includes the Pan/Tilt/Zoom function. The telnet format is not a VISCA command protocol. A modified VISCA command protocol is only supported on the RS-232 port.

 Additional UVC resolutions added: See table on page 10.

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 33 of 40

Page 34

WallVIEW HD-USB SR Camera System

PPENDIX 2 - TELNET SERIAL COMMAND

API

The Vaddio Serial Command protocol is a high level text based command line interface supported via telnet session on the ClearVIEW HD-USB PTZ Camera. The Vaddio Serial Command protocol is not supported on the RS-232 port. The RS-232 port is dedicated for VISCA commands only. The command application protocol interface is intended to allow external device such as AMX and Crestron to control the camera. The protocol is based upon ASCII format following the VT100 terminal emulation standard and uses an intuitive textual command nomenclature for ease of use. The API is accessed by a telnet client on the Ethernet port. All ASCII characters will be echoed to terminal program and appended with VT100 string -ESC[J (HEX- 1B 5B 4A). Vaddio Command lines are terminated on carriage return. After the carriage return, the VT100 appends with –

ESC[J. (Note: Most terminal programs automatically strip the VT100 string.) General format usage follows a get/set structure. Usage examples for each type are:

Set Example

COMMAND: > camera pan right RESPONSE: > OK

Get Example COMMAND: > stream mode get RESPONSE: > streaming mode usb

Syntax Error Example

COMMAND: > camera pan right SPONRESE: > ERROR

Additional programming controls associated with the terminal protocol includes:

 CTRL 5 - Clears the current serial buffer on the device.

Telnet sessions will require access verification and uses the same username and password associated with the Administrator account on the embedded web server. The default Telnet Port is 23. Command lines are terminated with a carriage return.

Telnet Command List

CameraHome

 NAME camera home - Move the camera to the home position  SYNOPSIS camera home

 DESCRIPTION Method used to move the camera to the home position

 EXAMPLES camera home Move the camera back to the home position

CameraPan

 NAME camera pan - Pans the camera left or right  SYNOPSIS camera pan {left|right|stop} [1-24]

 DESCRIPTION Method used to pan the camera

 OPTIONS left Move the camera left right Move the camera right stop Stop the camera movement speed Optional integer from 1-24 that represents the speed (Default: 12)  EXAMPLES camera pan left Pans the camera left at the default speed camera pan right 20 Pans the camera right using a speed of 20 camera pan stop

Stops the pan movement of the camera

Image: Engrossing example of simulated Telnet session

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 34 of 40

Page 35

WallVIEW HD-USB SR Camera System

CameraPreset

 NAME camera preset - Recall and set camera presets  SYNOPSIS camera preset {recall|store} [1-6]

 DESCRIPTION Method used to recall and store camera presets

 OPTIONS recall Recall preset store Store preset

preset Required value from 1-6 used to indicate the preset number

 EXAMPLES camera recall 3 Move camera to preset position 3 camera store 1 Store current camera position as preset 1

CameraTilt

 NAME camera tilt - Tilts the camera up or down  SYNOPSIS camera tilt {up|down|stop} [1-20]

 DESCRIPTION Method used to tilt the camera

 OPTIONS up Move the camera up down Move the camera down stop Stop the camera movement speed Optional integer from 1-20 that represents the speed (Default: 10)  EXAMPLES camera tilt up Tilts the camera up at the default speed camera tilt down 20 Tilts the camera up using a speed of 20 camera tilt stop Stops the tilt movement of the camera

CameraZoom

 NAME camera zoom - Zoom the camera in or out  SYNOPSIS camera zoom {in|out|stop} [1-7]

 DESCRIPTION Method used to zoom the camera

 OPTIONS in Zoom in out Zoom out stop Stop the camera movement speed Optional integer from 1-7 that represents the speed (Default: 3)  EXAMPLES camera zoom in Zooms the camera in at the default speed camera zoom out 7 Zooms the camera out using a speed of 7 camera zoom stop Stops the zoom movement of the camera

Camera

 NAME camera - Base command for camera control functionality. Used in conjunction with control arguments to

include home, pan, tilt, zoom, and preset.

WallVIEW HD-USB SR PTZ Camera System Document Number 342-0465 Rev. D Page 35 of 40

Page 36

WallVIEW HD-USB SR Camera System

Exit

 NAME exit - ends the current API command session  SYNOPSIS exit

 DESCRIPTION Exit ends the current API command session. If the session is over telnet, the session is ended and the socket is closed. If the session is over serial, a new session is started.

Help

 NAME help - display an overview of the CLI syntax  SYNOPSIS help

 DESCRIPTION Display an overview of the command line syntax

History

 NAME history - command history  SYNOPSIS history [limit]

 DESCRIPTION Since many of the programs read user input a line at a time, the command history is used to keep track of these lines and also recall historic information  HISTO RY NA VI GATION The command history can be navigated using the up and down arrow keys. The up arrow will move up a single entry in the command history while the down arrow moves down in the command history.  HISTORY EXPANSION The command history supports the expansion functionality from which previous commands can be recalled from within a single session. History expansion is performed immediately after a complete line is read. Listed below are examples of history expansion:

* !! Substitute the last command line. * !N Substitute the Nth command line (absolute as per ’history’ command) * !-N Substitute the command line entered N lines before (relative)  EXAMPLES history

Displays the current command buffer history 5 Sets the history command buffer to remember the last 5 unique entries

NetworkPing

 NAME network ping - send ICMP ECHO_REQUEST to network hosts  SYNOPSIS network ping [count <count>] [size <size>] <destination-ip>

 DESCRIPTION Use the ICMP protocol’s mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUEST datagrams have an IP and ICMP header, followed by a struct timeval and then an arbitrary number of pad bytes used to fill out the packet.  OPTIONS count Stop after sending count ECHO_REQUEST packets. With deadline option, ping waits f or count ECHO_REPLY packets, until the timeout expires. The default is 5.

destination

The destination IP address where the ECHO_REQUESTS are sent size The data size of the ICMP packet to send. The default is 56 bytes

 EXAMPLES network ping 192.168.1.1

Attempt to send 5 ICMP ECHO_REQUESTs with data size 56 to the host at 192.168.1.1 network ping count 10 size 100 192.168.1.1 Attempt to send 10 ICMP ECHO_REQUESTs with data size of 100 to the host at 192.168.1.1

WallVIEW HD-USB SR PTZ Camera System Document Number 342-0465 Rev. D Page 36 of 40

Page 37

WallVIEW HD-USB SR Camera System

NetworkSettings

 NAME network settings - get current network settings  SYNOPSIS network settings {get}

 DESCRIPTION Method used to get the current network settings of the device

 OPTIONS get Get the current network settings for the machine  EXAMPLES network settings get MAC Address:

00:04:a3:85:0a:ee

IP Address:

10.10.8.116

Netmask:

255.255.255.0

Gateway:

10.10.8.100 Returns the current network settings for mac addres, ip address, netmask, and gateway

Network

 NAME network - Gets the current network settings or pings an IP address  SYNOPSIS network {settings get | ping [count <count>] [size <size>] <destination-ip>}

 DESCRIPTION Method used to get the current network settings or check network

 OPTIONS settings Get the current network settings ping Send ICMP ECHO_REQUEST to network host  EXAMPLES network settings get

Gets the current network settings

---network ping count 1 10.10.10.100 Pings 10.10.10.100 once and displays results

StreamingMode

 NAME streaming mode - Gets or sets the current streaming mode  SYNOPSIS streaming mode {get|usb|network}

 DESCRIPTION Method used to get or set the current streaming settings

 OPTIONS get Get the current streaming mode

usb

Set the current streaming mode to USB

ethernet Set the current streaming mode to Ethernet

 EXAMPLES streaming mode get

mode: usb Returns the current streaming mode streaming mode usb

----

streaming mode ethernet OK Sets the streaming mode to Ethernet

WallVIEW HD-USB SR PTZ Camera System Document Number 342-0465 Rev. D Page 37 of 40

Page 38

WallVIEW HD-USB SR Camera System

StreamingQuality

 NAME

streaming quality - Gets or sets the current streaming quality

 SYNOPSIS

streaming quality {get|low|standard|high}

 DESCRIPTION

Method used to get or set the current streaming quality

 OPTIONS get Get the current streaming quality low Set video quality to low standard Set video quality to standard high Set video quality to high

 EXAMPLES streaming quality get

quality:low Returns the current streaming quality

----

streaming quality standard OK Sets the streaming quality to standard

StreamingResolution

 NAME streaming resolution - Gets or sets the current streaming quality

 SYNOPSIS streaming resolution {get|1080p|720p|4cif|480p|cif}

 DESCRIPTION Method used to get or set the current streaming resolution

 OPTIONS get Get the current streaming resolution 1080p Set video resolution to 1080p 720p Set video resolution to 720p 4cif Set video resolution to 4cif 480p Set video resolution to 480p cif Set video resolution to cif

 EXAMPLES streaming resolution get

resolution:720p Returns the current streaming resolution

----

streaming resolution 720p OK Sets the streaming resolution to 720p

Streaming

 NAME streaming - Gets or sets the current streaming settings

 SYNOPSIS streaming {mode {get|usb|ethernet}} | resolution {get|1080p|720p|4cif|480p|cif} |quality {get|low|standard|high}}

 DESCRIPTION Method used to get or set the current streaming settings

 OPTIONS mode Get or set the current streaming mode

resolution Get or set the current streaming video resolution quality Get or set the current streaming video frame rate and bit rate

 EXAMPLES streaming mode get mode: usb

Returns the current streaming mode

---streaming mode ethernet Sets the streaming mode to Ethernet

---streaming quality standard Sets the streaming quality to standard

---streaming resolution 720p Sets the streaming resolution to 720p

WallVIEW HD-USB SR PTZ Camera System Document Number 342-0465 Rev. D Page 38 of 40

Page 39

WallVIEW HD-USB SR Camera System

SystemFactory‐Reset

 NAME system factory-reset - Gets or sets factory reset status

 SYNOPSIS system factory-reset {get|on|off}  DESCRIPTION Method used to get or set the factory reset status  OPTIONS get Get the current factory reset status on Enable factory reset on reboot off Disable factory reset on reboot  EXAMPLES system factory-reset get factory-reset (software): off factory-reset (hardware): [Hardware reset is designated by rear panel dip switches in down position] off Returns the factory reset status

---system factory-reset on factory-reset (software): on factory-reset (hardware): off Enables factory reset upon reboot

SystemReboot

 NAME system reboot - Reboots system  SYNOPSIS system reboot [<seconds>]  DESCRIPTION Method used to reboot system  OPTIONS seconds The number of seconds to delay the reboot  EXAMPLES reboot Reboot system immediately reboot 30 Reboot the system in 30 seconds

Version

 NAME version - display the system version information  SYNOPSIS version

 DESCRIPTION Display an overview of the command line syntax

 EXAMPLES Version Returns the current software version version

 DESCRIPTION Display an overview of the command line syntax

 EXAMPLES Version

Returns the current software version

WallVIEW HD-USB SR PTZ Camera System Document Number 342-0465 Rev. D Page 39 of 40

Page 40

WallVIEW HD-USB SR Camera System

©2012 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, ClearVIEW, WallVIEW, EZCamera, CONCEAL, EasyTalk, EasyMic, EasyUSB and PowerRite are trademarks of

WallVIEW HD-USB SR PTZ Camera System Document Number 342-0465 Rev. D Page 40 of 40

Vaddio. All other trademarks are property of their respective owners. Document 342-0465 Rev. D

Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464

www.vaddio.com

VADDIO WallVIEW HD-USB SR System, ClearVIEW HD-USB Installation And User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual