VADDIO WallView HD1 CCU with HSDS Technical Features & Specifications

W

W

L

AALLL

VVIIEEW

W

™

™

C

C

C

C

U

U

H

H

D11

D

WWIITTHH

HHSSDDSS™™

Featuring the Vaddio™ Quick-Connect™ CCU

The Vaddio WallVIEW CCU HD1 is built around the
Sony® EVI-HD1 high definition pan/tilt/zoom camera.
With a 2 mega-pixel CMOS sensor, the EVI-HD1 is an
ideal choice for a wide range of high definition video
applications. WallVIEW CCU HD1 allows the user to
adjust color, gain and iris functions of the camera (see
Figure 1). These controls allow the camera to deliver a
more accurate representation of the image that is being
captured. The other added advantages include the ability
to color match multiple cameras and make necessary
changes to iris and gain quickly and easily. Settings may
be stored by using two Scene buttons, for various lighting
conditions.
The WallVIEW CCU HD1 uses high speed differential
signaling (HSDS), an active video transmission system, to
deliver high quality HD or SD video over standard Cat. 5
cabling. Adjustments allow the video to be extended up
to 500 feet from the Quick-Connect CCU with virtually no
loss in video quality.
Overall, the WallVIEW CCU HD1 is superb for a wide range of high definition shooting applications. It is also
highly suitable for applications where adjusting the color and brightness levels of one or multiple cameras is
critical, such as houses of worship, corporate boardrooms, live event production and distance-learning
applications.

Figure 1: (top) Quick-Connect CCU 1 RU rack mount
interface; (bottom) WallVIEW Universal PRO HD1 System
with Camera, EZIM and Wall Mount

WHAT’S INCLUDED

• Sony EVI-HD1 High Definition PTZ Camera
(1/3 Type, 2 megapixel CMOS sensor with
10x zoom lens)

• EZCamera Interface Module CCU (EZIM)

• Vaddio EZIM HD Break-out Cable*

• Vaddio Quick-Connect CCU (QCCU) 1-RU

Rack Mount Interface

• Sony IR Remote

• EZCamera Control Adapter (RJ-45 to DB-9)

• 36V PowerRite™ Power Supply

• Vaddio Thin Profile Wall Mount HD1

• Mounting Hardware & Documentation

* Optional EZIM SD Break-out Cable sold separately

TECHNICAL FEATURES

CCU Controls

CCU controls on the product include: Red &
Blue Gain; Aperture; Auto & Manual Iris; Gain;
Auto & One Push White Balance; and Scene
Store A & B buttons.

©2008 Vaddio – All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Vaddio, EZIM, HSDS,
ProductionVIEW, Quick-Connect, WallVIEW, PowerRite, are registered trademarks of Vaddio. All other trade marks are property of
their respective owners. Document Number 101708 Rev C.

EZCamera Interface Module (EZIM)

The EZCamera Interface Module CCU is a small
camera interface module that mounts inside the
wall mount and is a universal interface for several
HD or SD PTZ cameras available today. The
EZIM uses a multi-pin connector and cable
assemblies for maximum flexibility.

Quick-Connect CCU

The 1-RU interface has (high definition) analog
component video outputs (Y, Pb, Pr) for 1080i
and 720p resolution signals or S-Video and
Composite Video* outputs on BNC connectors.

* Optional SD cable sold separately

Distance Adjustments

Because WallVIEW CCU uses active electronics,
there are four cable length adjustments (<100’,
200’, 300’ 400’+), which equalize the length of
the Cat. 5 twisted pairs and vastly improves the
HD video performance.

WallVIEW CCU HD1

TECHNICAL FEATURES (CONTINUED)

Luminance Gain Adjustment

A luminance gain control (Y-Gain) is also
provided, which allows for enhanced control and
fine tuning of the video signals when longer Cat.
5 cabling runs are required.

Superior Power Regulation

The WallVIEW Universal PRO HD1 uses the
PowerRite 36V power supply, which is the key to
providing the electrical current that the larger

TECHNICAL DRAWINGS

Figure 2: Quick-Connect CCU (QCCU) interface front panel and rear panel diagrams with functional callouts.

Tally Light
indicates when
camera is live

For PowerRite 36
VDC 2A Power Supply

Two-Line LCD Screen displays when
CCU Control is active, and the value
of the parameter that is being adjusted

CCU Control transfers RS-232 control between an
external controller (i.e. ProductionVIEW) and CCU

Scenes A & B allow manual settings of color, iris and
other parameters to be stored in QCCU

POWER RJ-45 Cat. 5 cable
dedicated to supply power
to camera

CONTROL RJ-45 Cat. 5 cable,
which passes RS-232 commands
through CCU to the PTZ camera

Tally & Gen Lock Inputs to for sending Tally and
Gen Lock signals to the BRC series cameras over
CAT-5 cable

PTZ camera motors, like the BRC-H700 or EVI­HD1, require to operate properly.

Complete System

The WallVIEW CCU HD1 comes complete and
includes everything the installer needs to
accomplish a professional installation. Three Cat.
5 cable runs for Power, Video and Control are
required to complete the installation. .

Optional SD Break-out Cable: Part # 440-6207-000

(provides Y-C and Composite video)

Gain adjustment for
camera light sensitivity

Auto and Manual Iris
settings for light intake

Aperture allows sharpness of the
video image to be adjusted

Auto White Balance (AWB) and One Push White
Balance (OPWB) allow the user to select either of
these modes, or manual by adjusting knobs

Red & Blue Gain knobs for adjusting the camera’s color levels

RJ-45 for HD / SD
Video Signals

HD / SD Outputs on BNC
Connectors

Video Adjustments for Y-Gain and
Distance (up to 500’)

CAM SELECT is an 8-position dip switch
that allows the user to select which
camera is connected to the CCU

Toll Free 800-572-2011 ● Phone [phone] ● FAX [phone] ● www.vaddio.com

WallVIEW CCU HD1

p

)

Figure 3: EZCamera Interface Module CCU (EZIM) with three (3) RJ-45 connectors for POWER, RS-232 IN / GEN LOCK and VIDEO
(HD or SD), Top View (left) and Isometric View (right)

EZIM ISO View

Mounting Flange for
securing the EZIM
to camera mounts

RJ-45 Connectors for Video,
Power, Control and Genlock
Gain adjustment (for use on
BRC PTZ cameras)

DB-25 Connector
for Camera
Break-out Cable

SYSTEM CONNECTIVITY

Figure 4:

Basic system connectivity of a WallVIEW CCU HD1 System and ProductionVIEW Super Joystick Controller

HD Video to

Switcher/Display

SD Video (in SD mode)

to Switcher/Display

RS-232

Vaddio ProductionVIEW™

er Joystick

Su

Cat. 5 Cables Up to 500’
High Speed Differential Signaling

Vaddio HD Interface
Cable for WallVIEW HD1

DB-25M

Connector List
1 Y Pb Pr OUT (DB-15HD)
2 RS-232 IN (8-Pin Min Din)
3 GEN LOCK IN (unused with HD1)
4 VIDEO OUT (BNC)
5 POWER (EIAJ4

use in SD mode only

1

2

3

4

5

EVI-HD1 on Wall
Mount with EZIM

Toll Free 800-572-2011 ● Phone [phone] ● FAX [phone] ● www.vaddio.com

WallVIEW CCU HD1

TECHNICAL SPECIFICATIONS

WallVIEW CCU HD1

Part Numbers WallVIEW CCU HD1 999-6307-000 (NTSC)

WallVIEW CCU HD1 999-6307-001 (PAL)

• Sony EVI-HD1

Image Device 1/3 type CMOS
Video Signal 1080i/59.94, 1080i/50, 720p/59.94, 720p/50, NTSC (LB, CR, SQ) or PAL (LB, CR, SQ) (switchable)
Effective Picture Elements 2 Megapixels (approximately)
Lens 10x Optical Zoom (40x with digital zoom)
Focal Length f=3.4 to 33.9mm
Horizontal Viewing Angle 8 to 70 degrees
Video S/N Ratio 50 dB
Pan/Tilt Angle -100 to +100 degrees (Pan), -25 to +25 degrees (Tilt)

• Quick-Connect CCU Interface (QCCU)

Connectors Power Connector: 5.5mm OD x 2.5mm ID

Power RJ-45: Supplies 36V to EZCamera Interface Module Regulator
Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems
Control Out RJ-45: Passes RS-232 and Sync video feed to camera EZIM
Tally: 2-Pin Phoenix type spring cage connector
Video Inputs: BNC Connector for Sync (not applicable with HD1)
Video Outputs: BNC Connectors for HD Analog Component (Y,PB,PR) / SD (Y-C and Composite)
Video RJ-45: Transports HD video from camera EZIM

Camera Select Switch Selection switch for camera that will be operated with the CCU
Video Adjustments Y-Gain (luminance gain) for fine tuning over longer cable distances

Distance Compensation: 100’, 200’, 300’, 400’+

Cat. 5 Cable Distance Up to 500’ (152.4m)
Power Supply 36 VDC, 2 Amp
Dimensions 1-RU Rack Mount - 1.75” H x 19” W x 6” D (4.45 cm x 4.26 cm x 15.24 cm)

• EZCamera Interface Module CCU (EZIM)

Connectors Three (3) RJ-45 Connectors

One DB-25 for Power, Video, Control & Gen Lock (n/a for HD1 camera)

Cable Assembly For Sony HD1 Camera: DB-25M to DB-15HD/8-Pin Mini Din/BNC x 2/EIAJ4 Power Connector

* Optional SD Video Cable (with S-video and composite) Part # 440-6207-000

Power Regulator Supplies 12VDC to Cameras
Dimensions 3” H x 4.5” W x 1.2” D (7.6 cm x 11.4 cm x 3 cm)

• Thin Profile Wall Mount HD1

Materials 12-Gauge CRS with Black Powder Coat Paint
Dimensions 6” H x 11.75” W x 11” D (15.2 cm x 29.85 cm x 27.9 cm)
Weight 5.4 lbs. (2.5 kg)

Toll Free 800-572-2011 ● Phone [phone] ● FAX [phone] ● www.vaddio.com