
A Division of Photo Control Corporation
WallVIEW
Pan/Tilt/Zoom Camera System
The Vaddio WallVIEW 50i PTZ Camera System is
designed to provide system integrators with an easy to
install wall-mounted camera system. The system
®
features a Canon
Vaddio’s thin profile wall-mount bracket. The system
is equipped with Vaddio’s EZCamera
which allows the installer to use Cat. 5 cabling to run power, video and camera control.
Also included is Vaddio’s PowerRite
the right amount of power needed for the camera over Cat. 5 cabling. An optional
VISCA control interface can be added to allow the camera to work with any
VISCA compatible control device.
What’s Included
The Vaddio WallVIEW 50i PTZ includes the
following items:
• Canon VC-C50i PTZ Camera
• Canon Multi-Function Remote Control
• Thin profile camera wall-mount bracket
• EZCamera Camera Shoe Interface
• EZCamera Quick-Connect Box
• EZCamera Control Adapter
• 18 VDC PowerRite Power Supply
• One 12' S-Video cable
• One 12' Composite video cable
• All screws and mounting hardware
Technical Features
Canon VC-C50i PTZ Camera
A wall-mountable PTZ camera equipped with a
26X optical and 12X digital zoom lens. The
VC-C50i delivers high quality video from far
distances and under the dimmest lighting
conditions. Building on Canon’s long-standing
tradition as the leader in optics and image
processing, it offers greater flexiblity in the most
demanding environments. Camera features
include: Nine camera presets, auto-focus, autoiris, and one lux minimum illumination. The
motorized pan has a range of 100 degrees each
way and the tilt has a range of 90 degrees up
and 30 degrees down.
Thin Profile Wall-Mount Bracket
Custom PTZ camera wall-mount bracket designed exclusively for the Canon VC-C50i
camera. Heavy duty metal construction with
VC-C50i PTZ Camera mounted on
50i PTZ
™
Cabling System,
™
Power Supply. The PowerRite system regulates
cable access openings for in-wall or exposed
wall installations. Bracket can be mounted on a
dual gang box for new construction pre-wiring.
Includes tripod screw and mounting hardware.
EZCamera Cabling System
Allows installer to use Cat. 5 cable to run power,
video and camera control. Video Balun technology
is used to extend the range of the video signal
and to allow it to work on Cat. 5 cable. The
Vaddio PowerRite Camera Power System
includes a high output power supply and a
power regulator to maintain the right voltage
over Cat. 5 cable.
EZCamera Shoe Interface
A plug-in shoe that intergrates the Canon VC-C50i
PTZ Camera to the EZCamera Cable System.
The shoe interface converts camera outputs to
three RJ-45 jacks. The first jack provides power
and video. The second jack provides primary
camera control signaling and the third provides
daisy-chain camera control to additional Canon
PTZ Cameras.
EZCamera Quick-Connect Box
This small interface box converts power, S-Video
and composite video into a single Cat. 5 cable.
Velcro
VISCA Camera Control Option
The system can be ordered with VISCA camera
control. This allows you the ability to use the
camera system with control systems and video
codecs that support the VISCA protocol.
The system ships standard with the Canon
instruction set.
®
mounting square provided.
™

Technical Specifications
Optics
Lens Configuration Nine(9) Groups of Eleven(11) Lens
Focal Length & F Number f=3.5 to 91mm; F1.6 to F4.0
Marginal Lumination Ratio 30% Over
Zoom Ratio 26X (at infinite)
Focus Region Wide: 0.01m to ∞; Telephoto: 1.6m to ∞;
Horizontal 42˚ Wide; 1.7˚ Telephoto
Imaging
Imaging Device 1/4” CCD
Number of Pixels NTSC – 630K Total (340K effective);
Color Separating System Secondary Mosaic Filter System
Electronic Shutter Speed NTSC – 1/80,000 - 1/60 - 1/1 sec;
Imaging Mode Visible Light Mode; Infrared Light Mode
Minimum Subject Illumination 1 lx (visible light mode, at 1/30 electric
Infrared Lighting GaAIAs Infrared Radiation LED;
Infrared Light Power About 0.75 W x 4
Infrared Light Wavelength 970nm (peak value)
Video
Color System NTSC/PAL
Luminance Signal S/N ratio 50dB
Resolution Horizontal: 460 TV Lines;
Scanning System Interlace
Auto/Manual
PAL – 740K Total (400K effective)
PAL – 1/80,000 - 1/50 - 1/1 sec
shutter speed)
Four Piece
(depending on the country of use)
Vertical: 350 TV Lines
White Balance Auto/Manual/One-push
Character Display Setting, Clock
Mechanism
Pan Angle Range VC-C50i – ±100˚; VC-C50iR – ±170˚
Tilt Angle Range VC-C50i – -30˚ to +90˚;
Rotation Speed Pan: 1 to 90˚/s; Tilt: 1 to 70˚/s
Infared Cut Filter Motor Driven
Preset Function Nine(9) Positions
Cascade Control Nine(9) Cameras
Connectors
BNC Composite Video Output
Multiconnector S-Video Output, RS-232C Control
DC Input Custom Jack (AC adapter is used)
Regulation
Wide Converter Connection Diameter: 37mm; Pitch: 0.75mm
Voltage (camera only) 13VDC
Power Consumption 13 W
PowerRite Power Supply 100 - 240V, 50-60Hz, 18VDC
Other
Operating Temperature 32˚ F (0˚ C)
Dimensions Depth: 4.48”/113mm
Weight 14.3oz/405g
VC-C50iR – -90˚ to +10˚
(visible light mode/infrared light mode)
(input, output), Other
Width: 4”/101mm
Height: 3.58”/90mm
CAT. 5 CABLE
CAMERA SHOE
WALLPLATE
INTERFACE
VC-C50i
Figure 1 – EZCamera cable system with a Quick-connect box.
CAMERA
SHOE
INTERFACE
CAT. 5 CABLE
CAT. 5 CABLE TO SECOND CAMERA
DUAL WALLPLATE
▲
VC-C50i
Figure 2 – EZCamera cable system with a quick-connect dual gang wallplate.
POWER
COMPOSITE VIDEO
S-VIDEO
POWER
COMPOSITE VIDEO
S-VIDEO
RS-232
▲▲
PowerRite
Power Supply
▲
Monitor
Codec
▲
PowerRite
Power Supply
▲
Monitor
▲
▲
Codec
ControlVIEW
Toll Free: 800-572-2011 • Phone: 763971-4400 • Fax: 763-971-4464
www.vaddio.com
©2004 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing subject to change. WallVIEW, EZCamera,
ControlVIEW and PowerRite are registered trademarks of Vaddio, Inc. All other trademarks are property of their respective owners. Form Number 0129/02-09 RevC.