Vaddio H900 User Manual

Installation and User

Guide

Vaddio™ WallVIEW™ PRO H900

Featuring the Quick-Connect PRO, EZIM and Sony® BRC-H900

Part Numbers:

999-6895-000: WallVIEW PRO H900 System with the Sony BRC-H900 (camera included) - North America 999-6895-001: WallVIEW PRO H900 System with the Sony BRC-H900 (camera included) - International

Quick-Connect PRO for the BRC-H900 Camera

Inside Front Cover - Blank

Quick-Connect PRO for the BRC-H900 Camera

Contents

Overview: ................................................................................................................................................................... 4

Important Safeguards: ........................................................................................................................................... 4

Intended Use .......................................................................................................................................................... 4

Save These Instructions ........................................................................................................................................ 4

Information: ............................................................................................................................................................ 5

Unpacking .................................................................................................................................................................. 5

998-6895-000: WallVIEW PRO H900 - North America ......................................................................................... 5

998-6895-001: WallVIEW PRO H900 - International ............................................................................................ 5

Anatomy of the Quick-Connect PRO System Interface ............................................................................................. 6

Image: Quick-Connect PRO Front Panel Indicator (left to right) ....................................................................... 6

Image: Quick-Connect PRO Rear Panel Connectors and Controls (left to right) .............................................. 6

Image: EZIM Top Panel (left to right) and ISO View of EZIM ........................................................................... 7

Installation Basics: ..................................................................................................................................................... 7

Step By Step Mounting Instructions: ...................................................................................................................... 8

Image: Huge-Heavy Duty Wall Mount ............................................................................................................... 8

Image: EZIM Break out Cable and Wall Mount ................................................................................................. 8

Drawing: High Definition Video & Power Break Out Cable ............................................................................... 8

Drawing: Wiring Diagram of Basic Connectivity (the basic idea) ...................................................................... 9

Completing the Installation: .................................................................................................................................. 10

Optimizing System Performance: ............................................................................................................................ 10

General Specifications ............................................................................................................................................. 10

FCC, ICES-003 Compliance and CE Declaration of Conformity ............................................................................. 11

Warranty Information: .............................................................................................................................................. 12

Appendix 1: Cable Pin-outs for the WallVIEW PRO Systems ................................................................................ 13

EZCamera Interface Module Pin-outs.................................................................................................................. 13

Quick-Connect PRO Series Interface Pin-outs .................................................................................................... 13

EZCamera Interface Module Pin-outs (continued) .............................................................................................. 14

Quick-Connect PRO for the BRC-H900 Camera

Overview:

Vaddio WallVIEW PRO BRC-H900 is built and adapted for use with the Sony BRC-H900 3-CMOS HD pan/tilt/zoom robotic camera. This system was designed for an easier cable extension installation and integration where the camera must be located a long distance away from the head-end processors and switchers.

The Quick-Connect PRO uses HSDS™ (high speed differential signaling), which is a highly accurate, long distance, active video transmission system. The PRO series delivers low-loss, high-quality HD video over Cat-5 cabling at distances up to, and including, 500’ (152.4m). The system is capable of accepting the high definition resolution video that the BRC-H900 camera outputs, (HD - 1080i/59.94/50 field/s or 720p59.94/50 frames/s component video), as well as higher resolutions up to 1080p/60.

The Quick-Connect PRO system also has automatic camera sensing for loading the correct control protocols, automatic resolution sensing, analog component video outputs (YPbPr), a four position distance adjustment for Cat-5 cabling skew and Y-Gain adjustment, all in a 1-RU rack-mount enclosure. The Quick-Connect PRO System includes the EZ Interface Module (EZIM™) that fastens to the back of the camera mount. Like all Vaddio WallVIEW systems, the Thin Profile Wall Mount and mounting hardware is included.

The BRC-H900 HD PTZ Camera features a 14x zoom lens and a three (3), 1/2-type 2.07 megapixel CMOS image sensors. The Quick-Connect PRO kit for the BRC-H900 is excellent when paired with a ProductionVIEW

Precision Camera Controller because of the built-in basic CCU and its ability to produce remarkable video in a

wide range of shooting conditions.

Important Safeguards:

Read and understand all instructions and warranty statements before using. Do not operate any device if it has been dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.

General Safeguard: Use only the power supply provided with the system. Use of any unauthorized power supply will void any and all warranties. Please do not cut the secondary side (or the DC side) of the power supply and attempt to extend the power to the camera. The warranty is voided when the cable is cut.

Intended Use

Before operating the device, please read the entire manual thoroughly. The system was designed, built and tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the one provided or outdoor operation has not been tested and could damage the device and/or create a potentially unsafe operating condition.

Save These Instructions

The information contained in this manual will help you install and operate your product. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from

www.vaddio.com free of charge.

Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not work well for professional installations and can be the cause of intermittent connections which, can result in the RS-232 control line failing and locking up, and/or compromising the HSDS™ signals. For best results please use standard RJ-45 connectors and test all cables for prope r pin-

rior to use and connection to Vaddio product.

outs

Quick-Connect PRO for the BRC-H900 Camera

Information:

For RS-232 control information, please see the full-length Technical Manual for the BRC-H900. This manual can be found either on the Sony or the Vaddio website.

Unpacking

998-6895-000: WallVIEW PRO H900 - North America

Carefully remove the device(s) and all parts from the packaging. Please do not toss the packaging yet, just set it aside where it won’t be in the way. Unpack and identify the following parts:

 One (1) Sony BRC-H900 PTZ Camera  One (1) 998-1105-009, Quick-Connect PRO Series Interface  One (1) 36 VDC 2.78 Amp power supply with power cord for North America  One (1) 2-pin Molex 5.0mm Euro-style IR Forward connector  One (1) EZIM (EZ Interface Module) for Quick-Connect PRO  Two (2) 6-32 x .188” Pan Head for attaching EZIM to the Wall Mount  One (1) 440-6704-000 Break-out Cable from EZIM to Camera  One (1) 998-1001-232 EZCamera Control Adapter  One (1) 535-2000-225 Wall Mount for Camera (in Black)  Four (4) #8 x 1.25” Sheet Metal Screws  Four (4) Wall Anchors (EZ Anchors)  Two (2) ¼” - 20 Camera Mounting Screws  One (1) Documentation

998-6895-001: WallVIEW PRO H900 - International

Unpack and identify the following parts:

 One (1) Sony BRC-H900 PTZ Camera  One (1) 998-1105-009, Quick-Connect PRO Series Interface  One (1) 36 VDC 2.78 Amp power supply  One (1) Euro Power Cable  One (1) UK Power Cable  One (1) 2-pin Molex 5.0mm Euro-style IR Forward connector  One (1) EZIM (EZ Interface Module) for Quick-Connect PRO  Two (2) 6-32 x .188” Pan Head for attaching EZIM to the Wall Mount  One (1) 440-6704-000 Break-out Cable from EZIM to Camera  One (1) 998-1001-232 EZCamera Control Adapter  One (1) 535-2000-225 Wall Mount for Camera (in Black)  Four (4) #8 x 1.25” Sheet Metal Screws  Four (4) Wall Anchors (EZ Anchors)  Two (2) ¼” - 20 Camera Mounting Screws  One (1) Documentation

+ 11 hidden pages