VADDIO WALL VIEW HD-19, 999-6945-001AW, 999-6945-000AW, 999-6945-000, 999-6945-001 Installation And User Manual
A
INSTALLATION AND USER GUIDE
V
AADDDDIIO
V
High Definition PTZ Camera Featuring the Quick-Connect™ SR Interface
Quick-Connect SR Interface
PN: 998-1105-016
O
Black Version
Part Number 999-6945-000 (North America)
Part Number 999-6945-001 (International)
™
™
W
W
L
AALLL
™
™
H
D--1199
H
D
VVIIEEW
rctic White Version
Part Number 999-6945-000AW (North America)
Part Number 999-6945-001AW (International)
W
S
YYSSTTEEM
S
M
©2011 Vaddio - All Rights Reserved ● ClearVIEW HD-19 ● Document Number 342-0266 Rev. A
ClearVIEW HD-19
Inside Front Cover - Blank
ClearVIEW HD-19 Manual 342-0266 Rev. A Page 2 of 20
ClearVIEW HD-19
p
Overview:
The WallVIEW HD-19 HD PTZ camera with Vaddio’s EZCamera™
Cat-5e cabling system using HSDS™, delivers a system that allows
for easy installation and integration of cameras. The HD-19 camera
is built around a 1/3 high-speed, progressive scan CMOS image
sensor with a total of 1.3 Megapixels and a 19X optical zoom lens,
making it the ideal choice for a wide range of high definition video
applications
The HD-19 camera uses an increased pixel aperture size, high
signal to noise and column-parallel A/D conversion method to create
images containing more detail than ever before. It combines the
speed of the CMOS sensor with advanced-quality image sensor
technologies amassed through the development of CCDs. The HD-
19 achieves improved picture quality even in low light environments
requiring a minimum illumination rated at an astonishing 0.7 LUX
(F1.6 - 50IRE).
In the WallVIEW HD-19 System, the HD-19 is paired with the Quick-Connect SR Interface, which provides power
to the camera and returns HSDS video from the camera up to 100’ (30.5m) over a single Cat-5e cable. RS-232
control and IR signals (modulated or non-modulated) can be passed from the camera to third-party equipment,
such as videoconferencing codecs on a second Cat-5e cable. The WallVIEW HD-19 is great for integration
projects since no power supply is required at the camera location.
The WallVIEW HD-19 is available in Black and in Arctic White and is equipped with a slip-clutch mechanism for
smooth pan/tilt operation and control. The HD-19 outputs HD video (YPbPr at 1080p/60/59.94/50/30/25,
1080i/59.94/50, 720p/59.94/50, 480i/30fps and 576i/25fps) and SD video (CVBS at 480i/NTSC or 576i/PAL)
simultaneously. Overall, the HD-19 is an exceptional camera for a wide range of HD video applications such as
houses of worship, videoconferencing, corporate boardrooms, live events and distan ce-learning.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the
one provided or outdoor operation has not been tested and could damage the device and/or create a potentially
unsafe operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Use only the power supply provided with the system. Use of any unauthorized
power supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermitten t connections which
can result in the RS-232 control line failing and locking up, and/or com promising the HSDS™
signals. For best results please use standard RJ-45 connectors and test all cables for proper
in-outs prior to use and connection to Vaddio product.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
ClearVIEW HD-19 Manual 342-0266 Rev. A Page 3 of 20
ClearVIEW HD-19
Unpacking:
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts in 999-6945-000:
One (1) ClearVIEW HD-19 HD Camera
One (1) Vaddio IR Remote Commander
One (1) Quick-Connect SR Interface
One (1) Vaddio PowerRite™ 24 VDC, 2.0 Amp Power Supply
One (1) EZCamera™ Control Adapter (RJ-45 to DB-9)
One (1) Thin Profile Wall Mount with Mounting Hardware
One (1) AC Cord Set for North America
Documentation
(Note: The 999-6945-001 Int’l Version includes the Euro and UK power cables)
ClearVIEW HD-19 PTZ Camera, Front View with Feature Call-outs:
①
④
②
③
1) Zoom Lens and Image Sensor:
The 19X optical zoom lens is built around a 1/3-Type, high-speed, progressive scan CMOS image sensor with a
total of 1.3 Megapixels for precise HD video image acquisition.
2) Red Tally Light:
A red tally light is illuminated when the camera receives a VISCA command from an external control system.
3) IR Sensors:
IR sensors are built into the front of the ClearVIEW HD-19 to receive IR signals from the IR remote control
supplied with the camera.
4) Blue Power Light:
A Vaddio blue power light is illuminated when the camera is turned on.
Compatible Switchers and Joystick Controllers:
ProductionVIEW™ HD MV
(999-5625-000)
AutoPresenter
(999-5675-000)
Precision Camera Controller
(999-5700-000)
ClearVIEW HD-19 Manual 342-0266 Rev. A Page 4 of 20
ClearVIEW HD-19
ClearVIEW HD-19 PTZ Camera, Rear View with Feature Call-outs:
⑤
⑨
⑥
⑩
⑦
⑪
⑧
⑫
5) RS-232 IN & IR Out:
The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by
the IR receivers, which can be transmitted to third party devices.
6) Dip Switch Settings:
Settings for IR remote, baud rate, SD output format, and image flip can be configured on these switches. See
page 5 for additional information on switch settings.
7) HD Video Select:
A rotary switch allows the user to choose the component HD output video resolution and format. See page 6 for
additional information on switch settings.
8) 12 VDC Input:
Power input for the standard, ClearVIEW HD-19 camera power supply.
9) YPbPr Output:
Component HD video is fed through the DB-15 connector. YPbPr and Composite signals are simultaneous. This
is an HD camera and the SD signals are down converted and are really not the sweet spot of this camera.
9) Composite Video (CVBS) Output:
The CVBS output feeds out SD video signals and is configurable with the dip switches to choose between
480i/NTSC or 576i/PAL in 4:3 formats. Squeeze and letterbox modes are also available (see dipswitches 6&7).
11) EZ Power/Video Port:
This RJ-45 connector is only used with the Quick-Connect SR Interface and the Quick- Connect DVI-D/HDMI SR
Interface to supply power and return HSDS video from the camera.
12) Slot for Optional Cards:
Optional slot cards can be plugged into the ClearVIEW HD-19 camera (the HD-SDI and the EZIM CCU Slot Cards
are available).
ClearVIEW HD-19 Manual 342-0266 Rev. A Page 5 of 20
ClearVIEW HD-19
Quick-Connect SR Interface Rear Panel with Feature Call-outs:
1) Power Input:
5.5mm OD x 2.5mm ID coaxial connector for the provided PowerRite 24 VDC, 2.0 Amp power supply.
2) EZCamera Power & HD Video:
A single Cat-5e connection between the EZCamera Power & HD Video RJ-45 connector and the EZ Power HD
Video Port on the HD-19 camera extends power and video up to 100’ (30.5 m). Power is fed to the camera and
HSDS video is returned on the Cat-5e.
3) HD Video Output:
DE-15 connector outputs the YPbPr analog component HD video extended from the camera over Cat-5e cable.
SD video resolutions are not supported by the HD-19 Camera or the Quick-Connect SR Interface.
4) IR Output:
With the IR pass-thru turned on at the camera (see Camera Settings section), send IR from third-party IR remote
controls to third-party equipment, such as videoconferencing codecs. IR can be transmitted as either modulated
or non-modulated signals for added flexibility.
5) RS-232 Input & Output Jacks:
When using the IR pass-thru function, the IR signals are pulled from the Cat-5e RS-232 cable and delivered as
modulated and non-modulated signals to the IR Output ports.
INSTALLATION (Making things easier):
The WallVIEW HD-19 product was specifically designed for installation on a vertical wall surface with Cat-5e
cable connectivity for Power, Video and Control signaling (two cables are required). Installation is simplified in
that no custom 8-Pin mini-din cables or expensive coax plenum cables are needed and no power outlets are
required near the camera bracket. All cabling is routed to the head-end using Cat-5e cables.
Before Installing:
Locate the camera mounting location paying close attention to camera viewing angles, lighting conditions,
possible line of site obstructions, and checking for in-wall obstructions where the camera is to be mounted.
Pick a mounting location that will optimize the performance of the camera.
The Thin Profile Wall Mount for the WallVIEW HD-19 can be mounted directly to a 2-gang wall box or can be
mounted to the drywall using four dry wall anchors.
RS-232 Cabling:
For RS-232, use a standard Cat-5e cable and RJ-45 connectors (568B termination) from the RS-232 port on the
back of a Vaddio camera controller or switcher. If the camera is connected to a third-party control system (such
as AMX or Crestron), a DB-9 to RJ-45 control adapter cable is supplied. Use of pass-thru type RJ-45
connectors is highly discouraged. The Vaddio Cat-5e wiring standard uses pins 7 and 8 on both the
video and the control Cat-5e cables. The pass-through connectors have proven to provide insufficient
connectivity for these important signals. They are “ok” for voice and data, but not for video and control.
①
② ④
③
⑤
ClearVIEW HD-19 Manual 342-0266 Rev. A Page 6 of 20
Loading...