Vaddio 999-5750-000 Specifications

Tech Spec

PCC Premier

Precision Camera Controller

Local RS-232 and Virtualized IP Camera Control

North America: 999-5750-000
International:999-5750-001

Features

Full control of up to 16 PTZ cameras (2 groups of 8 each)
at a time:

n Up to 8 PTZ cameras via wired RS-232 connection
n Virtually connect up to 16 RoboSHOT or ClearSHOT

cameras at a time, anywhere on the IP network

n Vaddio’s CCU scene macros and full preset store/recall functions
n Internal H.264 decoder and courtesy HDMI output to monitor the IP stream of the selected remote camera

Precision controls for the most demanding camera operation environments:

n Three-axis Hall effect joystick
n Pan, tilt, and zoom speed control knobs
n Illuminated pushbuttons for camera selection
n Large knobs for fine focus control and menu navigation, with push-to-select function

Intuitive camera access and addressing through powerful console and web interfaces:

n Full camera image controls via easy-to-read 7 in. touch-panel interface
n Web interface for complete administrative control from anywhere, using your browser
n Store up to 11 camera groups in the Address Book - 10 IP and/or RS-232 control, plus one predefined RS-232-

only group

n Individual control of all cameras in any two camera groups for immediate control of up to 16 cameras at a time

Versatile power solution using PoE+ (Power over Ethernet)

Connector Panel

From left to right:

Ethernet/PoE+ connector – PoE+ Gigabit Ethernet port provides access to the controller's web interface and to
cameras on the network, and powers the controller.

HDMI connector – Monitor the camera you are currently controlling. Video can only be displayed for cameras with
IP streaming capability.

RS-232 ports – Connect up to 8 cameras locally.

What's Included

Each PCC Premier is shipped with these items:

n PCC Premier Precision Camera Controller
n Mid-span PoE+ power injector with AC cord set(s)
n Cat-5e patch cable, 10 ft (3 m)
n Quick Start Guide

Document Number 342- 1133 Rev D

Tech Spec for PCC Premier Precision Camera Contr oller

Basic Connection Diagram

Specifications

Camera Management and Video Output

Control via RS-232 Up to 8 cameras

1 address book group

Image Control
Parameters

n Iris, Iris Gain
n Backlight compensation
n Red Gain, Blue Gain
n Detail, Chroma, Gamma
n Auto White Balance/One-

Push White Balance

Control via IP network Up to 80 cameras

10 address book groups

HDMI Output

IP streaming decoder: H.264

Protocol : RTSP

Supported HDMI display resolutions:

1080p/60, 1080p/50, 720p/60, 720p/50

Hardware

System I/O n 8 RS-232 camera control ports on RJ-45 connectors

n Gigabit Ethernet port with PoE+ support
n HDMI output

Control console n 7” capacitive touch panel display – Camera presets and administrative menu

n Illuminated rotary knobs – Focus (control, auto/manual) and Menu (display panel

navigation)

n Rotary knobs – Pan, tilt, and zoom speed
n Illuminated pushbuttons – Group A and Group B camera selection
n 3-axis Hall effect joystick, single-button – Pan, tilt, and zoom

Power, Physical and Environmental

Power Requirements PoE+ (Power over Ethernet) Power Consumption < 25W

Height

Width

Depth

Weight

5.125 in. (12.6 cm)

17 in. (43.2 cm)

11 in. (27.9 cm)

7.0 lb (3.18 kg)

Operating temperature

Operating humidity

Storage temperature

Storage humidity

0° to +40°C (32° to 104°F)

20% to 80% RH

-5° to +60° C (23° to 140°F)

20% to 80% RH

Specifications are subject to change without notice.