Vaddio 998-9000-200 Users Manual
Installation and User Guide
VADDIO™ DOMEVIEW™ HD
INDOOR FLUSH MOUNT DOME ENCLOSURE FOR THE VADDIO
ROBOSHOT™ AND HD-SERIES PTZ CAMERAS
Part Number: 998-9000-200
(Camera not included)
©2014 Vaddio - All Rights Reserved ● DomeVIEW HD 12” Indoor Flush Mount Dome ● Document Number 324-0186 Rev. B
Installation and User Guide
DomeVIEW HD - 12” Indoor Flush Mount Dome
p
Overview:
The Vaddio 12” DomeVIEW HD Series Dome
Enclosures for the ClearVIEW™ HD-18, HD-19,
HD-19SE HD-20, PowerVIEW ™HD-22, HD-30,
HD-USB, and RoboSHOT PTZ cameras are
attractive and robust integrated HD security
solutions for indoor and light-duty outdoor
applications. The DomeVIEW HD Series offers
three distinctly different products. In all cases, the
cameras are not included. This manual covers the
12” Indoor Flush Mount Dome Enclosure.
Each Indoor Flush Mount Dome Enclosure includes
a clear 12” optical-grade polycarbonate dome,
metal back can and mounting hardware. A Smoke
Tinted 12” accessory dome can be purchased as
an option.
The Flush Mount Dome comes with a heavy-duty
tile support brace to keep any tile from sagging, a
white spin-form trim ring for depth and dimension
Image: 12” Indoor Flush Mount Dome Enclosure with Clear OpticalGrade Dome for the Vaddio HD-18/19/20/22/30, HD-USB and
RoboSHOT Camera Systems.
with white cosmetic attachment screws.
With safety in mind, the provided tile support brace has six (6) fly points that can be fitted with turn buckles and a
safety hanger plate that fits on to the rear conduit connector to tie the enclosure up to the structure for additional
strength and safety.
The Flush mount Dome Enclosure can be mounted in tile or a drywall ceiling as well. The mounting flange is broad
enough to secure to most and hard ceilings. The DomeVIEW HD Series Domes are an excellent way to securely
mount Vaddio PTZ cameras for a wide range of HD video applications.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and tested
for use indoors, and with the provided power supply and cabling. The use of a power supply other than the one
provided or outdoor operation has not been tested and could damage the device and/or create a potentially unsafe
operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Use only the power supply provided with any camera system. Use of any
unauthorized or extended power supply will void any and all warranties.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
DomeVIEW HD - 12” Indoor Flush Mount Dome Manual 342-0186 Rev. B Page 2 of 8
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent conn ections which
can result in the RS-232 control line failing and locking up, and/or compro mising the HSDS™
signals. For best results please use standard RJ-45 connectors and test all cables for proper pin-
rior to use and connection to Vaddio product.
outs
DomeVIEW HD - 12” Indoor Flush Mount Dome
Anatomy of the 12” Indoor Flush Mount Dome
The DomeVIEW HD Indoor Pendant Mount Dome Enclosure will come partially assembled*.
One-Piece Tile Support Brace
Clamp Down (Romex) 3/4”Conduit Connector*
Safety Hanger Bracket*
Metal Back Can - Three (3) 10-32 x .5” studs hold the
six (6) spacer washers and the three (3) 2.5” standoffs*
Six (6) Spacer Washers*
¾” Conduit Nut*
Stand-offs:
Three (3) 2.5” long 10-32 threaded F to F, 0.5” Hex stand-offs support the camera
platform* for HD-18 & HD-19 Cameras
Three (3) 0.75” long 10-32 threaded M to F, 0.5” Hex stand-off extensions, add to
2.5” stand-offs for use with HD-18SE/20/22/30 & HD-USB Cameras Only
Three (3) 4.0” long 10-32 threaded F to F, 0.5” Hex stand-offs. Use only the 4.0”
stand-offs for RoboSHOT Cameras
Four (4) 10-32 x 1” Pan Head Screws attach
Metal Back Can to the Tile Support Brace
Two ¼”-20 x 5/8” screws attach HD-18/9to platform
Two ¼”-20 x 3/8” screws attach HD-19SE/20/22/30/USB to platform
Universal Camera Platform*
Three (3) 10-32 x .5” Pan Head Screws
attach through the camera platform to the
2.5” stand-offs*
Assembled
Vaddio HD-20, HD-19 or HD-18 PTZ
Camera Systems
12” Clear Optical-Grade Polycarbonate
Dome with three (3) stainless steel
screws attached
White Spin-formed Trim Ring
and White Screws
Not Assembled
*
These parts are pre-assembled.
DomeVIEW HD - 12” Indoor Flush Mount Dome Manual 342-0186 Rev. B Page 3 of 8
Not
Loading...