VacuMaid EB-210 SuperGroom II Model User Manual

EB-210EB-210

EB-210EB-210

EB-210
12” Electric Brush12” Electric Brush

12” Electric Brush12” Electric Brush

12” Electric Brush

FF

FF

F

eaea

eaea

ea

turtur

turtur

tur

es inces inc

es inces inc

es inc

lude:lude:

lude:lude:

lude:

• 3-level height adjustment--adjusts to match
surface being cleaned.

• Soft Bumper--wraps around brush to
protect baseboards and furniture.

• Reset Button--A flat belt drive with a belt

protector reset button means years of
trouble-free service.

Use this powerbrush to
vacuum wall to wall carpeting,
handmade carpets, fine rugs,
and other flooring.

This powerbrush must be used
with the top and lower wands.

REMEMBER: As with all electric appliances, risk of shock is possible. Do not
remove brush, pull wands out, or attempt maintenance while power is on.

Pile Height

Adjustment Knob

Overload Protector

(reset button)

Light Cover

Edge Cleaner

(not shown)

Light Bulb:
Replacement: EB21016

Belt
Replacement:EB21010

The overload protector pro­tects the motor from brush
jamming and belt breakage.
If the brush stops or is stalled,
the overload protector will shut the brush off.

TT

TT

T

o ro r

o ro r

o r

eset the oeset the o

eset the oeset the o

eset the o

vv

vv

v

erer

erer

er

loadload

loadload

load

prpr

prpr

pr

otectorotector

otectorotector

otector

,,

,,

, turn the vacuum off, press the reset button on the brush.

Now, you may turn your vacuum back on and continue cleaning.

WW

WW

W

andsands

andsands

ands

1.

(EB368793) Lo(EB368793) Lo

(EB368793) Lo(EB368793) Lo

(EB368793) Lo

ww

ww

w

er er

er er

er

WW

WW

W

andand

andand

and

• Connects to top wand when operating the floor brush. Curled end
connects to top wand, other end is inserted into electric brush.

2.

(W(W

(W(W

(W

-540) -540)

-540) -540)

-540)

TT

TT

T

op op

op op

op

WW

WW

W

andand

andand

and

• Connects to lower wand when operating the floor brush

• Cord management--keeps cords out of the way and allows you to
disengage the hose handle from the electric brush

1

2

3

CB-180CB-180

CB-180CB-180

CB-180
Mesh Mesh

Mesh Mesh

Mesh

TT

TT

T

ool Cadool Cad

ool Cadool Cad

ool Cad

• Holds accessories and tools making them
more manageable.

• For storing and transporting tools & accessories

Accessories shown may not be to scale.

WPH-219WPH-219

WPH-219WPH-219

WPH-219
2-Blac2-Blac

2-Blac2-Blac

2-Blac

k Strk Str

k Strk Str

k Str

• Can use one or both--depending on the
length of wand that you need.

• Attach any of your standard suction tools such
as the upholstery tool or dusting brush for whatever
cleaning needs you may have.

(Not intended for use with EB210 or other electric powerheads)

Electric Brush Assembly & Use

Wand Insertion and Release

WARNING

!

DO NOT attach or remove handle or wands while cleaner is ON. This
could cause sparking and damage the electrical contacts.

For the EB-210--insert wand, snap wand button into
place. Turn wand button past the stop position. This
slotted area allows you to turn the handle to the side to
reach farther under furniture.

Button

Stop Position

Slotted Area

HOW TO ST ART
EB-210 SuperGroom II™ Model:

1. To lower wands hold EB-210 SuperGroom II™
down with foot and pull back on wands.

2. St art vacuum and electric brush.

Pile height adjustment for the EB-210:
Rotate the pile height control. The pile height setting
is shown on the control. The deeper the pile of the
carpet, the higher the setting.

OVERLOAD PROTECTOR

The overload protector protects the motor from brush jamming and belt break­age. If the brush stops, the overload
protector will stop the electric brush.

To correct problem: Unplug the
electrical cord. Check brush area for
excessive lint buildup or jamming.

T o reset: Press reset button on top of
the brush. Plug in and turn on vacuum
and brush.

Overload Protector

(reset button)

4

5

EB-210 SuperGroom II™ Care

Electric Shock Hazard
Disconnect electrical supply before servicing or
cleaning the unit. Failure to do so could result
in electrical shock or personal injury.

LIGHT CHANGING
EB-210 SuperGroom II™:

1. Remove light cover by pressing in and
lifting both sides as shown.

2. Push in and turn bulb to remove.

3. Replace bulb and snap light cover in place.

Note: replacement bulb number is EB21016.

BEL T CHANGING AND BRUSH CLEANING
EB-210 SuperGroom II™:

Disconnect hose and brush from electrical outlet. Frequently check and

remove hair , string and lint buildup in the EB-210 SuperGroom II™ brush area. If
buildup becomes excessive, disconnect EB-210 SuperGroom II™ from wand
and follow steps below .

To Remove:

1. Raise the pile height adjustment rollers. Remove
the two cover screws from the EB-210 SuperGroom
II™ base.

2. Insert and twist flat screwdriver under both back
cover tabs.

GSH-430CGSH-430C

GSH-430CGSH-430C

GSH-430C
“T“T

“T“T

“T

earear

earear

ear

-Dr-Dr

-Dr-Dr

-Dr

op”op”

op”op”

op”

VV

VV

V

oltaolta

oltaolta

olta

gg

gg

g

e Hose with Pigtail Core Hose with Pigtail Cor

e Hose with Pigtail Core Hose with Pigtail Cor

e Hose with Pigtail Cor

The “tear-drop” style handle has 360° ro-
tation to minimize kinks, effort, and in-
hand weight. Its unique “tear-drop” de-
signed handle allows the hose to drape to
the floor reducing the weight
supported in your hand. For use with the
electric brush.

IMPORIMPOR

IMPORIMPOR

IMPOR

TT

TT

T

ANTANT

ANTANT

ANT
and handle from the wand. Arcing or damage to the electrical contacts can
occur if the wand is removed while brush power is on.

Hose Handling:Hose Handling:

Hose Handling:Hose Handling:

Hose Handling: Hold the hose and handle in any way you find to be the
most comfortable. With this new style handle, numerous hand positions are
offered and reduce strain and increase ease of use.

Also, for added ease while vacuuming, try keeping the hose behind you rather
than out in front of you. Use one hand to hold the handle and the other hand
to hold and guide the hose. Again, do what feels comfortable to you.

L6178

3. Turn EB-210 SuperGroom II™ right side up.
Tilt cover forward from back until front snaps free.

4. Carefully insert and lift screwdriver at
each brush support to free brush from
base.

5. Remove belt from motor shaft.

To Replace:

1. Slide on washers and brush supports.

6. Remove broken or worn belt.

7. Slide brush supports off to check and clean
brush support areas. See Brush Assembly-EB-
210 SuperGroom II™ for picture of complete
brush.

Base

Brush Support

Belt

Belt

2. Install new belt in belt groove on the brush
assembly , then over motor shaft as show .

Note: Replacement belt number is EB21010.

Belt

Motor

Belt

6

3. Insert both front support tabes into base
slots. Then snap brush supports into place.

Front
Support Tab

4. Line up tabs on front of base with slots
inside the cover front.

5. Tilt cover to back. Press cover firmly until rear
tabs snap into place. Turn EB-210 SuperGroom
II™ over, replace the cover screws and lower the
pile height adjustment rollers into place.

BRUSH SERVICING
EB-210 SuperGroom II™:

Disconnect hose and brush from electrical outlet and disconnect EB-210

SuperGroom II™ from wand so brush will not operate while being serviced.

T o Check:

When brush is worn to the level of the base
support bars, replace the brush.

Base Support Bar

Rear
Base
T abs

Cover
Slots

Front
Base T abs

To Replace:

Remove light cover, EB-210 SuperGroom II™
cover, belt and brush assembly (follow to remove
section in Belt Changing and Brush Cleaning”.

7

Please note when ordering that you must include the identification number for
the brush. For the EB-210 SuperGroom II™ this is EB210 (i.e. to order a light
bulb you would order an EB21016).

-10 Belt

-1 1

- 12 Floor nozzle lower unit

- 13 Motor assembly

- 14 Motor bracket

-1 5 Overload protector

-1 6 Light bulb

- 1 7 Light bulb socket

-1 8 Swivel catch

-19 Swivel

-2 0 Furniture guard

-2 1 Roller shaft

-2 2 Swivel bearing seal

-2 3 Nozzle roller

-24

-25

- 2 6 Front axle assembly

- 27 Brush and bearing assembly

-28

-2 9 Window cover (not shown)

-30

-31

- 32 Cord and plug assembly (not shown)

-3 3 Power head cover assembly (not shown)

- 34 Floor nozzle upper unit (not shown)

EB-210 SuperGroom II™ Parts List

Rear
Base
T abs

1. Remove brush support and washers from brush assembly .

2. Remove brush assembly and replace with new brush.

3. Reassemble brush assembly .

4. Replace belt, brush assembly, EB-210 SuperGroom II™
cover .

Please note when ordering that you must include the identification number for
the brush. For the EB-210 SuperGroom II™ this is EB210 (i.e. to order a light
bulb you would order an EB21016).

-10 Belt

-1 1

- 12 Floor nozzle lower unit

- 13 Motor assembly

- 14 Motor bracket

-1 5 Overload protector

-1 6 Light bulb

- 1 7 Light bulb socket

-1 8 Swivel catch

-19 Swivel

-2 0 Furniture guard

-2 1 Roller shaft

-2 2 Swivel bearing seal

-2 3 Nozzle roller

-24

-25

- 2 6 Front axle assembly

- 27 Brush and bearing assembly

-28

-2 9 Window cover (not shown)

-30

-31

- 32 Cord and plug assembly (not shown)

-3 3 Power head cover assembly (not shown)

- 34 Floor nozzle upper unit (not shown)

EB-210 SuperGroom II™ Parts List

8

L6178

3. Turn EB-210 SuperGroom II™ right side up.
Tilt cover forward from back until front snaps free.

5. Remove belt from motor shaft.

To Replace:

1. Slide on washers and brush supports.

7. Slide brush supports off to check and clean
brush support areas. See Brush Assembly-EB-
210 SuperGroom II™ for picture of complete
brush.

Brush Support

Belt

Brush
Support

BRUSH ASSEMBL Y
EB-210 SuperGroom II™:

Brush

Washer

Brush
Support

Belt Groove

Washer

10

13

12

14

15

17

16

18

19

22

20

27

26

21

23

9