6
Playback
1. Playback on DVR site
Click on remote controller, to enter record list, using
to select footage , click again to enter playback screen.
(Use remote controller)
Playback menu Playback screen
2. 3G client software for viewing directly
Executive “3G ClientApp.exe software and login (bus/123456) ,
the software interface shown as below.
(Select models with 3G modules)
5
Choose split screen
Add the vehicle information
Login
Preview
Vehicle name
Camera Channel
The event log and
vehicle driving records.
Google Map and inquiry the date
and time record of the vehicle.
Vehicle information
Google Map
Real-time image
«For more detailed information, please check the manual
in CD for reference.
H12A650H01
3. Through Carbox Player on PC site (Use HDD to playback directly)
★GPS Coordinate, Speed and Google Map
(select models with 3G modules)
Viewer interface schematic
Note:
before running CarBox2 software.
Caution: It needs to install DirectX 9.0 or above
Pos ition
Latitude &
Longitude
G Sen sor
Speed
Video Searching BAR
Play Speed
Volume
Control Interface
Description
Hard Disk Backup
Configuration
Google Map
Open Folder
Snapshot
3G client software
Note: To perform this software will require DirectX 9.0 or more.
★Power on / Record
Turn on the power, and it will take approximately 40 seconds to
boot up. During the recorder booting up, the HDD indicator LED will
start flashing as the recording is in progress.
1. Red light: light on, means power on; light off, means no
power/power off.
2. Green light: light flashing, means HDD take recording; light off
means non-recording.
★Power off/Stop recording
Power off also stop recording, at then you can take out HDD to
read the recorded files.
Quick Guide
Vehicle
4-CH DVR System
Power On( ) / Record( )Turn off Stop record
.Sta ndard : Main Mac hine, R emote Control , 3 Pin Power Cable ,
Harne ss Plug f or Video I nput , Alarm C able, D river CD,
Quick G uide
2.Op tiona l: 3G Modu le, G-M ouse
1
Accessories
Feature
Select Decode Items
Start Record Time
2011/06/30 17:05:13
2011/06/30 18:09:42
2011/06/30 19:14:06
2011/06/30 20:18:30
2011/06/30 21:22:54
Page 00001
2011/06/30 16:00:46
End Record Time
2011/06/30 18:09:41
2011/06/30 19:14:05
2011/06/30 20:18:30
2011/06/30 21:22:53
2011/06/30 22:27:14
Total Pages 00003
2011/06/30 17:05:13
Execute the CarBox2.exe from CD-ROM , the display as showing
below.
G-sensor: Detect & record G-force data.
X: Induct about level of vehicles moving
Y: Induct around level of vehicles moving
Z: Induct Height fluctuation around level of
vehicles moving
Setting
Recording Set Up
Please follow the steps below:
1. Plug the into PC directly or through USB converter.
2. Execute the player CarBox2.exe into main page.
3.Click icon to into the screen as below.
HDD
Select the location
of HDD
format
restore
êFo r more detail ed informati on, please che ck the
manual i n CD for referen ce.
HDD Format / Restore
Q: Two ways to format the HDD, format and restore.
When should you「format」or「restore」the HDD?
Ans:
1.「Format」HDD: When you use the HDD for the very first time or a
brand new HDD, you should format it in order to use it correctly.
2.「Restore」HDD: When you have backup the recorded files into PC and
want to use the HDD for other purposes, you have to restore it first
so it can be used correctly.
1. On Screen Set up
2. Through CarBox2 Player in case without Monitor
A:Remove the HDD and plug it to PC
B:Launch the software enter setup page show below:
Before start recording, please configure the setting well and then
into the host. The configuration interface of its options detailed instructions,
please see the operation manual of CD-ROM.
plug HDD
2011 D EC V1.0
optional
TYPE B: 3G Module
TYPE A: Without 3G Module
H.264
-20~+65℃
(inside vehicle)
120/100fps
NTSC/PAL
ALARM
Audio
4CH
3D
G-Sensor
SATA HDD
2.5"
HDD
3G Module
3
G
TYPE B
GPS
1. Provide Video output for playing-back mode in mainframe.
2. Recording format: D1 and CIF
3. Support 1CH Audio Input.
4. User friendly player software, easy to operation.
5. Overall quick search event log.
6. The full recording time and date can be showing in the monitor directly.
7. Wide range voltage design.
8. Auto recording after power supplied.
9. Removable HDD Track compatible with 2.5" HDD or SSD.
10. Provide 4 sets of alarm input ports, built-in buzzer.
11. Firmware can be upgraded via USB port.
12. Support recording audio, video, G-sensor and GPS data at the same time.
13. Optional 3G module, for real time monitoring the driving statue, or talk
to driver
2
4
Remote Controller
3
Front Panel
Rear Panel
CH1 Dis play
CH3 Dis play
Mute
Enter
Fast Re wind
Play
Step/ Pause
CH2 Dis play
Recor ding
Quad Di splay
Menu
Up / Down / L eft / Righ t
Fast Fo rward
Stop
CH4 Dis play
Operating Manual
► Main me nu page s witch
Menu
Delete All Record Data
Default Live View Channel
Power Management
Firmware Update
pag e 1/3 set ting pag e 2/3 set ting
Menu
Set Encode Parameter
Set Video Parameter
Set Time
Set Plate Number
1. Set En code Pa rameter
Menu
Set Encode Parameter
Set Video Parameter
Set Time
Set Plate Number
Set Encode Parameter
Encode Frame Size : D1
Encode Frame Rate : 15
Encode Quality : High
3. Set Ti me
Menu
Set Encode Parameter
Set Video Parameter
Set Plate Number
Set Time
Set Time
Set Time
Please Input Time:
/ / : :
2011 07 01 08 50 50 GMT 08:00
4. Set Pl ate Num ber
Menu
Set Encode Parameter
Set Video Parameter
Set Time
Set Plate Number
Set Plate Number
Set Plate Number
Please Input Plate Number:
5. Dele te All Record Data ( Forma t Disk)
★Cauti on! All data will be d elete d when you c lick “Yes ”.
Menu
Delete All Record Data
Default Live View Channel
Power Management
Firmware Upgate
Delete All Record Data
Delete All Record Data
Warring! Are you sure?
No Yes
6. Defa ult Liv e View Cha nnel Dis play
Menu
Delete All Record Data
Power Management
Firmware Update
Default Live View Channel
Default Live View Channel
Please Choose LiveView Single/Multi
Channel (s) When Starting!
Multi-Channels Channel 1
2. Set Vi deo Para meter
Menu
Set Encode Parameter
Set Time
Set Plate Number
Set Video Parameter
Set Video Parameter
Ch1 Brightness
Ch1 Contrast
Ch1 Hue
3G Moudle(TYPE B)
Video Input
Video Output
GPS(optional)
Audio Output
Power Input DC 8-28V
G O I G O
G 4 3 2 1
ALARM IN
AUDIO VIDEO
Harness Connector
Alarm
Input
Audio Input/Output
Video Output
1.DC12V output (+)
2.Signal and general DC
grounding
3.Signal and general DC
grounding
4.DC8~28V input (+)
5.ACC starter control
6.GNDP car power grounding.
(negative electricity)
Harness Connector:
Assorted cable includes
4 sets of Video input,
power core and
S connector.
G 4 G 3 G 2 G 1
G G G G
+V +V +V +V
DC12V OUT
VIDEO IN
pag e 3/3 (3G m odule )
Menu
Version
MDVR ID
3G Network
Alarm Setting
pag e 3/3 (wi thout 3 G modul e)
Menu
Version
Alarm Setting
Password Setting
7. Powe r Manag ement
Menu
Delete All Record Data
Default Live View Channel
Firmware Update
Power Management
Power Management
Please Choose Stop-Record-Time
After Car stalled!
0 Minute
10. Che ck MDVR I D Information
(Only a vaila ble when D VR with s pecific 3G modu le)
Menu
Version
3G Network
Alarm Setting
MDVR ID
MDVR ID
MDVR ID: TT000255
9. Chec k Firmw are Version
Menu
Version
MDVR ID
3G Network
Alarm Setting
Version
Kernel Version: 3412
RootFs Version: 3412
Application Version: 3412
2011/08/09 09:27:19
8. Firm ware Up date
Menu
Delete All Record Data
Default Live View Channel
Power Management
Firmware Update
Firmware Update
Don’t Power Off in Updating
Update 3339eng.upd
No Yes
11. 3G Netw ork Set ting
(Only a vaila ble when D VR with s pecific 3G modu le)
Menu
Version
MDVR ID
Alarm Setting
3G Network
3G Network
3G-Service:
UserName:
Passwork:
Port:13579
ON
12. Alar m setup
Menu
Version
MDVR ID
3G Network
Alarm Setting
Alarm Setting
Alarm 1 :
Alarm 2 :
Alarm 3 :
Alarm 4 :
Ch1
Ch2
Ch3
Ch4
13. Pas sword S etting
(3G ver sion wi thout th is func tion)
Menu
Version
Alarm Setting
Password Setting
Password Setting
Password Setting
* * * * Sure
F U
1 2 3 4
2.5”HDD
Power Indicator LED
Record Indicator LED
HDD Lock
USB
SIM Card Slot (TYPE B)
IR Receiver
Loading...