Page 1
GPS NAVIGATION NAV740
Function keys and I/O interfaces:
Quick Start Guide
2
1
Ref Component Description
1) SD/MMC Slot
2) Volume key Turns the volume up/down.
3) Battery Charge
Indicator
4) Touch Screen Displays the output of your appliance. Tap on the screen with your finger to select menu commands
5) On/Off Button Turns the device on or off.
6) Reset button Restarts your appliance. (Reset).
7) Headphone connector
8) Mini-USB- Connector
9) Main switch/
Battery switch
10) External antenna
connector
11) Loudspeaker Plays back music, language statements and warnings.
Accepts an optional SD (Secure Digital) or MMC (MultiMedia Card) card for removable storage.
3 4
9
The loading display will shine red during the charging process. It will shine green when the battery
is completely charged.
or enter data.
Connects to stereo headphones.
Connection for connecting power charge.
For battery charge.
Connector for an optional external GPS antennal.
5
6
7
8
10
11
1
Page 2
Initial Set up:
1.Switching on the navigation system
Remove the protective plastic from the screen and ensure the main power switch on the buttom
side of the unit is in the ON position.
!
Attention: Always leave the main switch in the ON position. The switch should only be set in the OFF position to
preserve battery charge if the unit is to be stored for an extended period of time.
Note:Some settings will be reset.
2.Charging the battery Car adaptor
!
Attention:It is necessary to charge the battery before initially
power on the device.Please switch on the device when charging.
The charging indicator is red until the navigation system is fully charged.When the navigation device is fully charged the
charge indicator turns green.
Note:You can use the navigation system during the charging process.
2
3.Attaching the cradle to car mount
4.Mounting the car holder to windshield or on dashboard
or
5.Attaching navigation device
1
!
Attention: Only fix the holder for the
navigation device to the windshield/
dashboard in a position that does not
impede driver’s view of the road.
6.Power ON/OFF the device
Press the power button to turn the unit on.The unit will display the main screen. Tap the “V7 Navigation”
button on the screen to start the navigation system.
2
Page 3
Initial setup
Languages Set Date Set Time Mainpage
V7 Navigation
The Map
When the V7 Navigation first starts,
the Map screen appears. From here
you can reach all three tabs of the V7
Navigation menu by tapping the
button.
On the tab, you can specify your destination as an Address, a POI (Point of Interest), or by its GPS
Coordinates. You may also select a destination from Favorites, or one of your recently visited destinations from
the History list.
Tap to edit or cancel your route. You can also view detailed trip information or change route parameters.
Tap to change your preferences or advanced features of your device.
Tap to stop or suspend the V7 navigation.
Find an address
From the Find & Go menu, tap to
open the list of recent cities and states. If
your destination city or state is on the list,
tap it to select that location.
Tap Other City if your destination is not displayed. This will take you to the screen where you can specify a new city.
To select a destination out of state, first tap Change State to specify another state. If you need to change the
country, tap , and select that country from the list.
After selecting the city, enter the street name of your destination. Once matching street names are found, the list of
results will be displayed automatically.
Tap any time to display a full list of matching streets immediately.
If your destination is the center of the city, tap . This feature is useful if you do not have an exact
street address.
3
Page 4
From the list of matching streets:
Tap a listed search result to select that
street,
Or, tap to show only the
streets containing a given house number,
Use the buttons to see additional results.
After the city and street are selected, you may now enter the house number. The range of available house numbers will
be displayed.
Tap to select a cross street, or
Use the keyboard to enter the house number, and tap when finished.
You have now finished setting the destination. Your V7 Navigation will automatically plan your route so that you can
begin your trip.
Find a POI (Point of Interest)
To select a POI, open the Find & Go
menu and tap to view the list
of POI groups. From this list you can:
Tap a POI group to open a list of
subcategories.
Tap to search POIs by name.
For a complete list of POIs near your reference location, tap .
Use the buttons to see additional POI groups.
To find POIs around a different reference location, tap .
A list of POIs will be displayed.
Tap to narrow the list by entering
a part of the POI name.
To see the name and address of additional
POIs, tap the buttons.
When you select an item from the list, the View POI screen will display the details of the selected POI.
Tap the button in the bottom left corner to return to the list and select a different POI, or
To complete your search, and return to the Map screen with the selected POI highlighted on the map, tap in
the View POI screen.
4
Page 5
Using the selected map point
Whenever you select a point on the map,
you can open the cursor menu to set up
or manage routes. To open the cursor
menu, tap :
Tap to replace the previous
destination with this point.
To add this point as a stop along your route, tap .
Tap to add the point to the end of the route.
Tap to see the list of nearby POIs, then tap to save this point as a new POI.
To save this point as a location of a road safety camera, tap .
The route itinerary with a list of route maneuvers can be displayed by tapping .
To save a camera, first select the type of the camera, the direction of the monitored traffic, and set the speed limit.
The V7 Navigation will warn you when you approach one of these points in the given direction. (Warning: Detecting
speed cameras may be prohibited by law in certain countries.)
The map screen
The V7 Navigation has a map screen for
both map browsing and navigation. The
map looks like a conventional road-map.
The blue arrow represents your current
position, and the green line shows the
recommended route.
If there is an active route, the three data fields at the bottom will display time, distance and other route information.
Also, the turn preview in the top left corner will display the type and distance of the next maneuver.
Use the and buttons to zoom in or zoom out.
is a three-state button. The map can be displayed in three different views according to the state of the button.
You can select Overview , 2D North-up or 3D track-up.
All sounds can be muted by tapping .
The satellite dish icon opens the GPS Data screen.
If you have moved the map, or modified the zoom level, the button appears. Tap this button to release the hold
and return back to your current position and re-enable Smart Zoom.
5
Page 6
Settings
The Settings menu lets you fine-tune the
way your V7 Navigation works.
Tap to set the general parameters,
like Speed Warning Options or Night Mode.
Tap to adjust keypad tones and voice guidance settings,
Tap to reach the TMC (Traffic Messaging Channel) Control Center to setup Real-Time traffic (where available),
Tap to manage which POIs will display on the map,
Tap to set the language of text and voice prompts, or units of measurement.
Tap to stop or suspend the V7 navigation.
You will find similar controls on all settings screens:
Tap Switches to turn features on or off ,
Move the handle of Sliders to adjust numeric values, or
Tap List selectors to change their values.
6
Loading...