The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence dangerous voltage within the
inside of the product that may be sufficient level to constitute a risk of electric
shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and servicing instructions.
Safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this LCD TV near water.
6) Clean only with dry cloth. Do not use liquid, alcohol, or aerosol cleaners.
7) Do not block any ventilation openings. Install your LCD TV in a well ventilated
area.
8) Keep your LCD TV away from moisture, excessive dust and any heat sources,
such as radiators, heat registers, stoves, or any other apparatus (including
amplifiers) that produce heat.
9) Do not remove the back cover. There are no user-serviceable parts inside.
10) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
11) Protect the power cord from being walked on or pinched particularly at plugs,
receptacles, and the point where they exit from the LCD TV.
12) Never rest objects on the power cord or place it in high traffic areas.
13) Only use attachments/accessories specified by the
manufacturer.
14) Use only with stand, tripod, bracket, or table specified by
the manufacturer, or sold with the LCD TV. When a cart is
used, use caution to avoid injury from tip-over.
15) Unplug this LCD TV during lightening storms or when
unused for long periods of time.
16) Refer all servicing to qualified service personnel-Servicing may be required if the LCD TV has been damaged in any way, such as
power-supply cord or plug damage, liquid has been spilled or objects have fallen
into the LCD TV, the LCD TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.
17) Do not expose your LCD TV to dripping or splashing, and do not place objects
filled with liquids on it.
18) The Shock Hazard Marking and Associated Graphical Symbol are provided on the
back panel of unit.
19) This product is only to perform the useful function of entertainment and visual
display tasks are excluded.
20) Wall or ceiling mounting: When mounting the product on a wall or ceiling, be sure
to install the product according to the method recommended by the manufacturer.
Use only the mounting hardware recommended by the manufacturer. This is a
safety feature.
21) The readily operable appliance coupler will serve as the disconnect device of this
apparatus.
22) The apparatus must be connected to a mains socket outlet with a protected
earthling connection.
CAUTION: Any damage caused by incorrectly attempting to mount this
LCD TV is not covered under the terms of the manufacturers warranty.
WARNING: To reduce the risk of fire or electric shock, do not expose this
LCD TV to rain or moisture.
Thank you for purchasing this LCD-TV.
This LCD-TV package comes with:
LCD TV
User’s Guide
Warranty Card
Remote control
Battery AA x 2
Power Cord
VGA Cable
RCA A/V Cable
1
FRONT PANEL BUTTONS
Volume Down
Volume Up
On Screen Display Menu On/Off
CH Down
CH Up
Input Source Selection (Enter)
Power ON/OFF button
Power LED Indicator/ Remote Control Receiver
2
BACK PANEL BUTTONS
A
BC DEFGH I J
A Power (AC input)
B Headphone Jack
C PC/ DVI Audio input
D VGA signal input
E Composite Video input
F YPbPr signal input
G AV/ S-Video/ YPbPr signal Audio input (left/right)
H S-Video input
I HDMI Input Terminal
J Cable/ Air TV input
3
REMOTE CONTROL
4
Remote control button function as follows:
1 INPUT Input source select
2 ENTER Confirm selection or enter selected menu
3 TV Direct to TV source
4 - VOL + Adjust volume UP/DOWN
5 LIST Select channel from program list
6 GUIDE Select electronic program guide (EPG)
7 0~9, - number Directly channel select
8 POWER Power ON/OFF
9 UP/ DOWN/ LEFT/
RIGHT
10 MENU On Screen Display (OSD) menu ON/OFF
11 ▼ CH ▲
12 FAV Select from preset Favorite Channels
13 ZOOM Adjust window size
14 MUTE Volume mute ON/OFF
15 INFO Display current information
16 SLEEP Set timer to turn off TV
17 MTSSelect Mono, Stereo or SAP sound
18 C.C
19 LAST
Move the cursor In OSD menu: UP/ DOWN for OSD function
select and LEFT/ RIGHT for function adjust
Adjust channel UP/DOWN
Select caption mode
Return to previous channel
5
INSTALLATION
Connecting RF antenna and Cable TV
Make sure the power is OFF before installing your LCD TV.
1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV
channels into memory with Auto Scan function when using an antenna TV system. This air
input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV
system (ATSC) can be found by the scanning of “AIR” with Auto Scan function. See page 21.
2) Cable TV: Connect the LCD TV to the cable with CATV and Digital cable. Preset the cable TV
channels into memory with Auto Scan function when using a cable TV system. The cable
input jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV)
and Digital cable system (clear QAM) can be found by the scanning of “Cable” with Auto Scan
function. See page 21.
RF Cable, CATV/ Digital cable
or Adapter (not supplied)
Note: Users can select either Air or Cable TV cable to be connected to the TV IN jack. To
watch both of them, use an adapter to connect both Air and Cable cables to the jack.
Connecting to DVD / Set Top Box
Connect Video/Audio cables from compatible devices into the back panel of LCD TV.
1) With AV cable:
VCD or DVD Player
RCA A/V Cable
6
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.