UVI Group T30G User Manual

T30G

Personal GPS Tracker User Manual

Designer and Manufacturer of GPS Tracking System & Solutions. 1

UVI GROUP CORPORATION Email/MSN: [e-mail]

Export Office:

Address: 403, F/4, Rainbow Building, ShangMeiLin,Shenzhen, China

Tel: [phone] (Mobile phone: [phone])

Fax: [phone]

Website: www.uvi-group.com

General Business: [e-mail] (Pls c.c. to [e-mail] for backup)

Table of Contents

A. Working Directions········································································································4
B. System Introduction······································································································5
C. The button operations. ·································································································6

1. Function set·················································································································7

2. System set···················································································································8

D. Operating instructions.······························································································· 12

1. Position Report Function·······················································································14

2. Tracking Function····································································································14

3. Stop tracking function.···························································································15

4. GPRS function of:····································································································15

5. Parameter setting： ·································································································15
A. Set the APN····································································································15
B. Set the center IP and Port···········································································15
C. Set the terminal ID························································································15

Designer and Manufacturer of GPS Tracking System & Solutions. 3

A. Working Directions

Thank you for your purchase of T30G personal GPS Tracker. In order to realize the

full functions of this product, please read this manual carefully before starting to use the

product.

1. This product can only be maintained and repaired by qualified professional service

personnel. If you detach this product for maintenance or repair, your warranty will be

invalidated.

2. When connecting the other devices, read carefully their instruction manuals, so as to

carry out correct installation; do not connect incompatible device.

3. Please use genuine original parts and qualified batteries and peripheral equipments,

so as to avoid damage to this product.

4. As this product is a high-tech product, please read carefully this manual before

starting to use the product, so as to avoid inappropriate operation.

5. This product can work properly only when GSM communication is in good condition.

6. Please reduce electromagnetic wave interference to the product; and use it properly.

7. GPS communication is liable to be affected by environmental shielding; may fail to

carry out positioning during certain circumstances. It will resume the positioning

function as soon as it leaves the shielding environment. This is normal. Please do not

worry when encountering such problem.

8. Each signal sent out from the system will be confirmed for successful transmission in

the base station of the mobile operator. However, if system stoppage occurs or if the

mobile telephone is preset to a switch off state by the customer, it cannot ensure

successful transmission.

9. For safety reason, do not tell the other people your T30G mobile number, without

taking precautions. Otherwise, your privacy may be compromised along with other

safety problem.

Designer and Manufacturer of GPS Tracking System & Solutions. 4

B. System Introduction

T30G is a high-tech product through cooperation with mobile operators. It combines

GPS Global Positioning System and GSM communication system, which can clearly

inform you the position & situation of your Pets, the elderly and children.

GPS is the abbreviation for Global Positioning System, which based on 24 position

location satellites around the earth orbit. Their locating precision can be kept within 10 to

15 meters.

GSM is the second digital mobile communication system (GPRS, second and fifth

digital mobile communication system), and at present it is the mobile communication

system that has the largest coverage and owns the most number of users. This product

combines GPS and GSM/GPRS technologies together. It uses GPS system to locate your

Pets, the elderly and children, and sends the position/ situation report back to you via

GSM/GPRS communication system.

With a delicate mobile-phone, you can monitor the present situation in your Pets, the

elderly and children from a faraway place. You can use the telephone remote control

function to set monitoring mode, which will report the situation of your Pets, the elderly

and children to you periodically.

Our products have added A-GPS functions; it can greatly short the locating time, so

as to achieve rapid orientation purposes.

Designer and Manufacturer of GPS Tracking System & Solutions. 5

C. The button operations.

There are two buttons on the product. One is five-directional button, and another is a

side key. Press side key for a long time, you can turn on/off the device. Figure 1 shows the

main time page while the products are working.

Side Key

Five-Directional Button

Figure 1

The icons on the top of the page are: signal strength, detecting of the SIM card, SMS

state or GPRS state, the power of the battery.

When the SIM card was detected, the no-card icon will disappear. Whether the

system works at GPRS or SMS state was identified by the third icon, the S denote the

SMS state, and the G denote the GPRS state.

As shown in the figure 1. 00:21 is the time; 09-01-01 was the date.

The moving speed is displayed on the right of the date.

If GPRS signal can’t be detected, there is no speed displayed.

The last two lines below the page are the longitude and the latitude. If there is no

GPRS signal, there is nothing displayed.

Designer and Manufacturer of GPS Tracking System & Solutions. 6

1. Function set

Press the 5-directional button to lighten the backlight. Press the side button to enter

the function settings page (as shown in figure 2).

In the function settings page, we can choose the function using the up and down

button. In the first item, it will send the SOS signal if anyone presses the 5-directonal

button. In the second item, we can choose turn on or turn off GPRS state using the right

and left key, and presses the 5-direction button down will affirm the state of current

choose. In the second item, we can choose turn on or turn off A-GPS state using the right

and left key, and presses the 5-direction button down will affirm the state of current

choose.

Press the side key to go back to the last settings page.

Figure 2

Designer and Manufacturer of GPS Tracking System & Solutions. 7

2. System set

Press the 5-directional button down to enter the system settings page (as shown in

figure 3). In the system set page, we can set the time, the date, and the wait time of the

GPRS return.

Press down the 5-directional button will affirm the choice and enter the corresponding

settings page, and press the side key to go back to the last page.

Figure

3

Designer and Manufacturer of GPS Tracking System & Solutions. 8

Figure 4 is the time settings page, up or down will change the time value, and right or

left button change the position. Pressing down the 5-directional button will affirm the

settings, the time is saved and return to the last page. Press the side key to go back to the

last page.

Figure 4

Designer and Manufacturer of GPS Tracking System & Solutions. 9

Figure 5 is the date settings page. They are the year, the month, the date in turn. up

or down will change the time value , and right or left button change the position. Pressing

down the 5-directional button will affirm the settings, the date is saved and returns to the

last page if the date format is right and if the date is wrong, and it won’t be saved. Press

the side key to go back to the last page.

Figure 5

Designer and Manufacturer of GPS Tracking System & Solutions. 10

Figure 6 shows the settings of the wait time of GPRS signal’s return page. The

maximum value is 59999 seconds. Up or down change the time value, and right and or

button change the position. Pressing down the 5-directional button will affirm the settings,

the time is saved and return to the last page. Press the side key to go back to the last

page.

Figure 6

The long time press on the side key will shut up the product. And the small hole near

the side key is the reset hole.

Designer and Manufacturer of GPS Tracking System & Solutions. 11

D. Operating instructions.

SMS protocol of, the default password of is 000000

SMS Instruction Format Remark

1 Request one position V******,000

2 Modify user password V******,001,######

****** is old password

###### is new password

3

Set the time internal of position

refresh

V******,002,XXX

XXX(3 digital) =000,stop

=[1——999] time internal (unit: min)

4

Set a preset phone number for

SOS button.

When this button is pressed,

Will send the SOS and position

message to the preset number.

V******,003,1,TelNumber

V******,003,2,TelNumber

TelNumber: Preset Tel. number, can set

2 numbers

(TelNumber must <20 digits )

5

Set low power alarm

When the voltage is lower than the

preset value, will send one lower

power alarm SMS to the control

number.

V******,004,X

X (voltage preset value)

=0 , close (default )

=1 , <3.5V send SMS alarm

=2 , <3.6V send SMS alarm

=3 , <3.7V send SMS alarm

=4 , <3.8V send SMS alarm

=5 , <3.9V send SMS alarm

6

Set over speed alarm

When the speed higher than the

preset value, will send one over

speed alarm SMS to the control

number.

V******,005,XX

XX (the speed preset value)

=00 , close

=[01≤XX≤20] (unit: 10Km)

7 Inquire the system state V******,008

Including the software version,

password, interval, speed limit, area

limit, I/O state, LED display state, GPS

state, SOS number, control number,

etc.

Designer and Manufacturer of GPS Tracking System & Solutions. 12

8 Set the APN

V******,011,APN,user

name, password

e.g.:V000000,011,CMNET,,(CMNET
has no user name, password, however,

the comma must be there)

9 Set the center IP and Port

V+Password,+012,+IP:P

ort

The IP and Port is the IP and Port of the

platform that customers used

10

Switch between SMS mode &

GPRS mode

V******,013,X

X=0 SMS mode

X=1 GPRS mode

This command is effective in GPRS

mode.

11

Set the phone number

These phone numbers can

Request one position through

dialing.

V******,014,X,telnumber

X:=1-5 position number of the phone

number

12 Set the terminal ID V******,015,terminal ID

The terminal ID is a 15 bit character

string; it can be capital letter or number.

eg: V000000,015,VICZONE00000001

13 Modify the IP and port of AGPS V******,020,ip:port

The IP and port is AGPS Server’s IP

and Port

14

Modify the username and

password of AGPS Server

V******,021,username,pa

ssword

Username and password is the

username and password of AGPS

Server

15 Turn on/off A-GPS Function V******,022,X

X =1, Turn on A-GPS (Default setting)

=0, Turn off A-GPS

16 Reboot the terminal V******,502

17 Clear all parameter V******,888 Including all configure and password

Notice: If you want to use low power alarm function, you must
set the time internal of position refresh function first.

Designer and Manufacturer of GPS Tracking System & Solutions. 13

1.

Position Report Function

No matter where you are, when you want to know the position of the terminal, send a

SMS message or make a telephone call to the ; it will report its location back to you by

SMS.

Edit a message as following format, and then send it to

Format: V+Password,+000

(Default password is: 000000)

For example: V000000,000

The send back one SMS, which including the position information

Lat: 2232.6022N, Lon: 11402.2969E

This mean your position is on North Latitude 22 degree 32.2232 cent and East Longitude

114 degree 2.2969 cent

Apply for one position service by another way: you need pre-storage the phone number in

SIM card

(a) Make a cell phone call to

(b) Then, listen the rings of, it will hold off after two rings.

(Its non-alarm and monitoring number)

(c) Then, after 10 second, the cell phone will receive the Position SMS.

2.

Tracking Function

Tracking report function can be turned on or off according to the requirements of the

user. Tracking function will continually report terminal position until it get stop

command .In this tracking mode, will send one position message at a preset time

interval.

Step1.Edit a message as following format, then send it to :

----- V+Password,+002,+XXX

(Note: XXX Unit: preset minute interval

-- if XXX=000 it is STOP tracking)

For example: V000000,002,003

(It means is will send Position Data every 3 minute.)

Step2. will send back one SMS-----Set Time OK.

This SMS means that is in tracking mode now and preset time interval is 3 minutes.

Step3. will send back position SMS at preset time interval.

In this example, the SMS will send back at preset time interval: 3 minute

Designer and Manufacturer of GPS Tracking System & Solutions. 14

Designer and Manufacturer of GPS Tracking System & Solutions. 15

3.

Stop tracking function.

This function is used to turn off tracking report function.

Edit a message as following format, and then send it to:

Format: V+passwaord,+002,+000

For example: V000000,002,000

4.

GPRS function of:

If you want to use the GPRS functions of, first you must set the GPRS parameters (APN,

Terminal ID, IP, port) in the SMS mode. Send V******, 013, 1 to turn into SMS mode

5.

Parameter setting：

A. Set the APN

Send the SMS to the tracker as following format

----- V+Password,+011,+APN,+user name,+password

For example: V000000,011,CMNET,,

(CMNET has no user name, password)

B. Set the center IP and Port

Send the SMS to the tracker as following format

----- V+Password,+012,+IP:Port

For example: V000000,012,121.34.241.160:8086

C. Set the terminal ID

Send the SMS to the tracker as following format

----- V+Password,+015,+terminal ID

The terminal ID is a 15 bit character string; it can be capital letter or number.

For example: V000000,015,VICZONE00000001

After setting the parameters, send V******,013,1 to turn to GPRS mode.