UTStarcom Korea Technologies FSUC800 User Manual

Rhein Tech Laboratories, Inc. Client: UTStarcom
360 Herndon Parkway Model: FSU C800
Suite 1400 FCC ID: O6Y-FSUC800
Herndon, VA 20170 Standards: FCC Part 22
http://www.rheintech.com RTL WO#: 2004232

APPENDIX I: MANUAL

Please refer to the following pages.

34 of 55

CDMA FSU C800

USER GUIDE

_______________________________________

Trademark Statement: “‘UTStarcom’, ‘iPAS’, and the UTStarcom logo are
trademarks of UTStarcom, Inc.”

Copyright Statement: “©UTStarcom, Inc. 2004. All rights reserved. No
part of this publication may be reproduced in any form or by any means
without the prior written permission of UTStarcom, Inc.”

Warranty Language: “The contents of this manual, whether in whole or in
part, do not constitute any express or implied warranty with respect to any
products of UTStarcom, Inc., or its subsidiaries.”

i

Table of Contents

SAFETY PRECAUTIONS.................................................... 1

FCC RF EXPOSURE COMPLIANCE ....................................................... 1

HANDLING THE PHONE, BATTERY AND CHARGER ..................................2

HANDLING THE PHONE ........................................................................ 3

HANDLING THE BATTE RY...................................................................... 5

HANDLING THE CHARGER ....................................................................6

1. GETTING STARTED ....................................................... 7

1.1 PACKAGE CONTENTS.....................................................................7

1.2 PHONE DESCRIPTION .................................................................... 8

1.2.1 Front View........................................................................................8

1.2.2 Rear View ......................................................................................10

1.3 DISPLAY INDICATORS ...................................................................10

1.4 SAFETY INSTRUCTIONS ................................................................ 11

1.5 PROTOCOL SUPPORT ..................................................................12

1.6 FUNCTIONS, FEATURES AND SPECIFICATIONS ...............................12

1.6.1 Phone Functions............................................................................12

1.6.2 Phone Features .............................................................................13

1.6.3 Technical Specifications.................................................................14

2. BASIC OPERATIONS ................................................... 15

2.1 SWITCH THE PHONE ON/OFF .......................................................15

2.2 MAKE A CALL...............................................................................15

2.3 REDIAL A CALL.............................................................................15

2.4 STORE A PHONE NUMBER ............................................................15

2.5 ACCESS MENU/LIST OPTIONS ......................................................16

2.6 USE SHORTCUTS......................................................................... 16

3. MENU OVERVIEW ........................................................ 17

ii

4. MENU OPERATIONS .................................................... 21

4.1 PHONE BOOK ..............................................................................21

4.1.1 View Contacts................................................................................22

4.1.2 New Entry ......................................................................................22

4.1.3 Find Name .....................................................................................23

4.1.4 Groups...........................................................................................23

4.1.5 Delete All .......................................................................................23

4.1.6 Speed Dial .....................................................................................23

4.1.7 Memory State.................................................................................24

4.2 SHORT MESSAGE SERVICE (SMS) ............................................... 25

4.2.1 Voice Mail ......................................................................................25

4.2.2 New Message................................................................................25

4.2.3 Inbox..............................................................................................27

4.2.4 Outbox...........................................................................................28

4.2.5 Delete Messages ...........................................................................28

4.3 RECENT CALLS............................................................................30

4.3.1 Incoming Calls ...............................................................................30

4.3.2 Outgoing Calls ...............................................................................30

4.3.3 Missed Calls ..................................................................................30

4.3.4 Delete Lists.................................................................................... 31

4.4 TOOLS ........................................................................................32

4.4.1 Schedule........................................................................................32

4.4.2 Alarm Clock....................................................................................33

4.4.3 Voice Memo...................................................................................34

4.5 SETTINGS ...................................................................................38

4.5.1 Sound ............................................................................................38

4.5.2 Display...........................................................................................41

4.5.3 Security..........................................................................................43

4.5.4 Call Setup ......................................................................................45

4.5.5 Dial Delay Time..............................................................................46

4.5.6 1x Data ..........................................................................................46

4.5.7 Network service .............................................................................48

4.5.8 Phone Info .....................................................................................49

iii

5. DATA SERVICE............................................................. 51

5.1 HARDWARE CONNECTION ............................................................51

5.2 INTERNET.................................................................................... 51

5.2.1 Computer Configuration.................................................................51

5.3 DATA FAX ....................................................................................60

5.3.1 Computer Configuration.................................................................60

5.3.2 Phone Configuration ......................................................................60

6. TEXT INPUT METHOD.................................................. 61

6.1 SWITCH INPUT METHOD...............................................................61

6.2 UPPERCASE/LOWERCASE LETTER................................................61

6.3 DIGIT ..........................................................................................61

6.4 SYMBOL ...................................................................................... 62

iv

Safety Precautions

SAFETY PRECAUTIONS

FCC RF Exposure Compliance

This PCS phone has been tested and complies with the Federal
Communications Commission (FCC) RF exposure limits for the General
Population/Uncontrolled exposure environment. In addition, it complies
with the following Standards and Guidelines:

z FCC 96-326, Guidelines for Evaluating the Environmental Effects of

Radio-Frequency Radiation

z FCC OET Bulletin 65 Edition 01-01 (2001) Supplement C, Evaluating

Compliance with FCC Guidelines for Human Exposure to Radio
Frequency Electromagnetic Fields

z ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with

Respect to Human Exposure to Radio Frequency Electromagnetic
Fields, 3 kHz to 300 GHz

z ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the

Measurement of Potentially Hazardous Electromagnetic Fields - RF
and Microwave

1

Safety Precautions

Handling the Phone, Battery and Charger

DANGER

Only use the battery and charger specified for the
phone. Failure to do so can result in damage to the
phone, electric shock or fire.

CAUTION

Do not store or operate the phone or charger in hot,
damp, or dusty areas, which can damage electrical and
mechanical components. Avoid prolonged exposure to
temperatures below 5°C or in excess of 35°C.

DANGER

Do not drop, shake or throw the phone or charger.
Rough handling can damage internal circuit boards and
the battery pack.

Do not use the phone in the vicinity of volatile gases.
Leave the area before using the phone. Failure to leave
the area can result in the risk of fire or an explosion.

Do not disassemble or modify the phone, charger, or
battery. Incorrect modifications, reassembly, or
tampering may result in malfunction or personal injury.

2

Handling the Phone

DANGER

Do not use the phone while operating a vehicle.

Observe local regulations for specialized areas
(hospital, aircraft, etc) when using the phone.

This phone has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This phone
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this phone does cause harmful interference to radio or
television reception, which can be determined by
turning the phone off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the phone and

receiver

- Connect the phone into an outlet on a circuit different
from that to which the receiver is connected

- Consult the dealer or an experienced radio/TV
technician for help

Safety Precautions

3

Safety Precautions

CAUTION

Changes or modifications not expressly approved by
UTStarcom, Inc. could void the user’s authority to
operate the phone.

The antennas used for this transmitter must be installed
to provide a separation distance of at least 20cm from
all persons and must not be co-located with or operated
in conjunction with any other antenna or transmitter.

Keep all storage media (magnetic cards, floppy disks,
credit cards, etc.) away from the phone. Close
encounters or contact can erase or damage the storage
media.

Keep all sharp metal objects (pins, nails, hairpins etc.)
away from the phone handset. The handset earpiece
contains a strong magnet that can attract and hold
metal objects. Remove any objects from the handset
earpiece before using, to avoid personal injury.

In case of emergency, key in the emergency number
(911 for example in US), then press the Talk key and let
the operator know your specific location. Don’t hang up
until you are told to do so.

4

Handling the Battery

DANGER

Do not dispose of the battery pack in a fire. It may
explode. Check with local waste management codes for
disposal instructions.

Do not force the battery pack into the phone. Improper
installation can cause malfunctions or damage the
battery pack. This may result in fire or personal injury.

Use caution in handling batteries in order not to short
the battery on conductive materials such as rings,
bracelets, and keys. The battery and/or conductor may
overheat and cause burns.

If the battery becomes too hot while recharging, it
should be removed immediately from the charger.

When clothes or skin are exposed to battery leakage,
rinse with clean water at once to prevent skin irritation.

Do not use a cracked, leaking or odor-emitting battery
pack near an open flame or high temperatures.

CAUTION

If a fully discharged battery is stored for a long period of
time, it may not be possible to recharge the battery.

Observe local waste management codes for proper
battery disposal instructions.

Safety Precautions

5

Safety Precautions

Handling the Charger

DANGER

Only use a power source that provides the appropriate
voltage (AC100~240 V) for the charger. An unsuitable
power source can result in damage to the charger,
electric shock or fire.

Do not use the charger if the power supply cord or plug
is damaged or frayed (exposed or broken wires, etc).
This can result in the risk of fire or electric shock.

Do not short circuit the charger connector jack. This may
result in fire or electric shock.

Immediately unplug the charger from the wall outlet in
the event that liquid is spilled into the unit to prevent fire
or electric shock.

CAUTION

Always unplug the charger from the wall outlet before
cleaning to avoid the risk of electric shock.

Do not place heavy objects on the cord to avoid
damage.

Always grip the power plug when removing the charger
from the wall outlet. Do not pull on the power supply
cord to avoid damage and the risk of electric shock.

6

Getting Started

1. GETTING STARTED

1.1 Package Contents

Thank you for purchasing this phone. Please check the package contents
by comparing them with the following list. If you find anything missing or if
the documentation set is incomplete, contact your local phone dealer
immediately

z CDMA FSU C800 Phone

z Backup battery

z Power adapter

z Receiver

z Cord

z User Guide

7

Getting Started

1.2 Phone Description

1.2.1 Front View

1. LCD Screen

2. Antenna

3. <BACK/CLR> key

This key is used to delete characters/digits or to return to the previous
menu level

4. <LEFT> and <RIGHT> keys:

These keys are used to move the cursor left or right or to perform
functions indicated on the screen

5. <UP> and <DOWN> keys:

These keys are used to scroll up and down through menu lists

8

Getting Started

6. <SELECT> key:

This key is used to select the highlighted menu option

7. Input keys:

These keys are used to enter digits, characters or symbols

8. <END> key:

This key is used to return to standby mode without changing menu
settings

9. <SND/RDL> key:

This key is used to make a call

10. <SPK> key:

This key is used to place a call on Speaker Phone

11. <SMS> key:

This key is used to access the Messages menu

12. <RCL> key:

This key is used to access the Recent Calls menu

13. <DND/MUTE> key

14. <ON/OFF> key

15. Power LED indicator

Lights when the power adapter is connected to the phone

16. Receiver

~ Note: This is only a brief introduction to the keypad functions.

Please refer to the contents of this user guide for detailed
descriptions and operations

9

Getting Started

1.2.2 Rear View

1. Antenna RF Connector

2. DC Power Jack

3. Power Switch

4. Serial Port Choice

5. Serial Port

1.3 Display Indicators

z Indicates digital mode. Indicates analog mode

z Shows the current signal strength. The higher the bar, the

stronger the signal

Strong Weak

z Indicates in calling mode. Indicates call connection failure

z Indicates in roaming mode

z Indicates the Alarm function is active

z Indicates a new short message has been received

10

Getting Started

z Indicates the DND (Don not Disturb) function is active

z Indicates the battery charge level. The higher the bar levels, the

greater the battery power

High Low

1.4 Safety Instructions

Basic safety precautions should always be followed to reduce risk when
using this product. Please read and follow all instructions marked on the
product

z To reduce the risk of electric shock - do not disassemble this product.

When the product is subsequently used, incorrect reassembly can
cause electric shock. When service is required, take the product to a
qualified service department

z Do not hold or make contact with the antenna while making a call

z Do not overload the wall outlets and the extension cord

z Do not use this product near water and never spill any liquid on the

product. This may result in the risk of fire or electric shock

z Do not place this product on an unstable location (cart, stand or table).

If it should fall from an unstable location, there is a risk of serious
product damage

z Do not cover the slots and openings on the product. They are provided

for ventilation and protection against overheating. Do not place this
product near a heater or radiator where proper ventilation is not
provided

z This product should only be operated from the type of power source

marked on the product. If you are not sure of the type of power
available, consult your dealer or local power company

11

Getting Started

z Never push objects of any kind into this product, since this may result

in a serious voltage short and may result in the risk of fire or electric
shock

z During thunderstorms, avoid using this product. There may be a

remote risk of an electric shock from lighting

z Disconnect the external power adapter and take out the back-up

battery when the product is not to be used for a long time

z Unplug this product from the wall outlet and obtain service from an

authorized service center under the following conditions:

- When the power supply plug is damaged or frayed

- If liquid has been spilled on, or into this product-or if this product has

been exposed to water or rain

- If this product does not work properly when the operating

instructions are followed

- If this product has been dropped or damaged

- If this product exhibits a distinct change in performance

1.5 Protocol Support

The phone supports IS-2000 Release 0, and is backward compatible with
IS95A/B. Software will be upgraded to support IS-2000 Release A, and
Release C in the future

1.6 Functions, Features and Specifications

1.6.1 Phone Functions

z High Quality Voice Service

- Making calls, receiving calls, call auto-answering and recording

- Vocoder: 13K QCELP, 8K EVRC

- Supports the speaker phone (hands-free) function

12

Getting Started

z Data Service

- Packet data service: Complies with IS707A.5, and supports

153kbps dual links for Internet

z Short Message Service (SMS)

- English and Spanish SMS: Supports write, read, send, receive,

delete, reply and forward of short messages

1.6.2 Phone Features

z Multi-language: English and Spanish

z Phone book: 200 entries

z Recent call record: Phone numbers of the last 28 incoming/outgoing

calls, and the call time

z Phone setup: Backlight, ring tone and volume, voice volume, key beep

volume

z Variety of alert sounds: Recharging prompt, low voltage, SMS prompt,

key beep, in-call minute alert

z Variety of ring tones: 6-chord polyphonic melodies

z Alarm clock and schedule

z Real time clock and calendar

z Incoming call display (requires network support)

z Abbreviated number dial / speed dial

z Call forward (unconditionally, if no answer, if busy) and call waiting

z Banner modification

z Do not disturb (DND) function, rejects incoming calls

z Emergency call

z Mute the microphone volume

13

Getting Started

1.6.3 Technical Specifications

Items Descriptions

RF Specifications

Air Interface

Vocoder 13K QCELP, 8K EVRC

Frequency Range

Frequency Accuracy <±300Hz
Receiver Sensitivity <-104dBm @FER 0.5%

Bandwidth 1.25MHz

Main Processor VIA CBP4.0

Maximum Data Rate 153.6Kbps

Environmental Requirements

Operating Temperature -10°C ~ +45°C

Storage Temperature -40°C ~ +66°C

Humidity 5 ~ 95%

Atmosphere Pressure 86 ~ 106kPa

Mechanical Size and Weight

Size 222 (L) x 175 (W) x 75 (H) mm

Weight 1000g

Safety Parameters

EMC/EMI Conforms to Internal/China standards,

ESD Protected to 1.5KV

IS-2000 1XRTT; backward compatible
with IS95A

TX: 824～849MHz

RX: 869

complies with IS98D requirements

／B

～894MHz

14

Basic Operations

2. BASIC OPERATIONS

2.1 Switch the Phone On/Off

Turn the “Power” button on the phone to “ON” or “OFF” to switch the
phone on or off

2.2 Make a Call

1. Pick up the receiver or press <SPK>

2. Key in the phone number

To delete the last entered digit, press <BACK/CLR>

3. Press <SND/RDL> or wait a moment (if the Dial Delay function is
active). The phone will begin to dial

4. After the call, hang up the receiver or press the <END> key

2.3 Redial a Call

1. Pick up the receiver or press <SPK>

2. Press <SND/RDL>. The most recently dialed phone number will be
dialed

2.4 Store a Phone Number

In standby mode, new entries can be added to the phone book

1. Enter the desired phone number and press <LEFT>

2. Enter the name according to the prompts and press <LEFT> to confirm
and complete the operation

~ Note: The name cannot be left blank. If blank, the phone will prompt

for an entry upon pressing <LEFT>

15

Basic Operations

2.5 Access Menu/List Options

A variety of options are available for the phone menu

1. In standby mode, press <LEFT>/<SELECT> to access the phone
menu

2. Press the <UP>/<DOWN> key to highlight the desired submenu, and
then press the <SELECT> key to access this submenu. You can also
access the submenu (option) by pressing its corresponding number
key

~ Note: To return to the previous menu level, press <BACK/CLR>

To return to standby mode without changing the menu settings,
press <END>

2.6 Use Shortcuts

In standby mode, these shortcuts access the following submenus or
options:

z Pressing <RIGHT> will access the View Contacts option

z Pressing <SMS> will access the Messages submenu

z Pressing <RCL> will access the Recent Calls submenu

z Pressing <UP> will access the Volume option

16

Menu Overview

3. MENU OVERVIEW

The entire menu layout is as shown below:

View Contacts

Add Number

Add Email

New Entry

Find Name

Contacts
(Phone Book)

Groups

Delete All

Speed Dial

Memory State

Messages

Voice Mail

New Message

Inbox

Add Address

Add URL

Add Note

No Group

Family

Friends

Colleagues

Business

Classmates

New Address

Message

17

Menu Overview

A

A

A

A

Outbox

Inbox

Delete Messages

Incoming Calls

Recent Calls

Tools

Settings Sounds

Outgoing Calls

Missed Calls

Delete Lists

Schedule

Alarm Clock

Voice Memo

Outbox

Delete All

New

List

Clear

Memo List

Voice List

nswering 1

nswering Rec.

Ringer

Volume

nswering 2

nswering 3

In Contacts

Not in Contacts

Alarm Clock

Ringer

Key Beep

18

Display

Security

Call Setup

Menu Overview

Handset

Handfree

Service Change

Alert

Banner

Backlight

Language

Hyphen

Lock Phone

Change Password

Load Default

Auto Answer

Answering Sel. Default

Minute Beep

Call Connect

Power On/off

7 Seconds

15 Seconds

30 Seconds

Always off

English

Español

no

yes

Unlock

Lock

On Power Up

Off

After 3 Seconds

Answering
Machine

19

Menu Overview

Voice Privacy

Dial Delay Time

Data/Fax

1x Data

Port Speed

Call Forward

Network Service

Phone Info.

Call Waiting

CNIR

Phone Number

SW Version

Answering 1

Answering 2

Answering 3

Enhanced

Standard

Off

Fax In Once

Fax In Always

Data In Once

Data In Always

9600

19200

115200

230400

FWD If Busy

FWD If No Answer

FWD All Calls

Disable

Enable

Enable

Disable

20

Menu Operations

y

4. MENU OPERATIONS

4.1 Phone Book

In standby mode, pressing <LEFT> will access the menu and display the
submenu list shown in the following figure:

1 Contacts

2 Messages

3 Recent Calls

4 Tools

5 Settings

Then, press <SELECT> or <1> to access the
display options shown in the following figure:

Contacts

1 View Contacts

2 New Entry

3 Find Name

4 Groups

5 Delete All

6 Speed Dial

7 Memor

State

Contacts submenu and

21

Menu Operations

4.1.1 View Contacts

Select this option to view phone book entries:

Press <LEFT> <1> <1> to select
list will be displayed. Press <UP>/<DOWN> to browse through entries

z Press <SELECT> to view details of the highlighted entry. Then, you

can press <LEFT> to edit the entry

z Press <RIGHT> to display Erase, Delete All and Send Message

options

View Contacts. The phone book entry

4.1.2 New Entry

Select this option to add new phone book entries:

Press <LEFT> <1> <2> to select
options:

1 Add Number

2 Add Email

3 Add Address

4 Add URL

5 Add Note

Press the corresponding number key to select

Add Address, Add URL or Add Note. Follow the phone prompts to enter

the corresponding information, and then press <LEFT>. Enter the name
and press <LEFT> to confirm and complete the operation

New Entry and display the following

New Entry

Add Number, Add Emai l,

22

Menu Operations

4.1.3 Find Name

Select this option to search for a phone book entry:

Press <LEFT> <1> <3> to select
are searching for, or the first character(s) of the name, and then press the
<LEFT> key. The phone will search through the records in the phone book,
and highlight the matched name

Find Name. Key in the name that you

4.1.4 Groups

Select this option to view information of a group, add entries to a group or
create a new group:

Press <LEFT> <1> <4> to select
can perform the following operations:

z Press <LEFT> to create a new group. Enter the group name, and then

press the <LEFT> key to confirm and complete the operation

z Press the corresponding number key to display the entry list of a group.

If there are no entries in the group, the phone will prompt you. Press
<LEFT> to add entries to the group. Press <UP>/<DOWN> to highlight
the desired entry, and then press <SELECT>. Press <LEFT> to
confirm and complete the operation

z Press <UP>/<DOWN> to highlight the desired group. Press <RIGHT>

and press <1> or <2> to select

Groups and display the group list. You

Edit title or Erase group

4.1.5 Delete All

Select this option to delete all phone book entries:

Press <LEFT> <1> <5> to select
complete the deletion

Delete All. Then, press <LEFT> to

4.1.6 Speed Dial

Select this option to assign a phone number in the phone book to one of
the 2-digit speed dial numbers (02~99) for greater convenience when
dialing:

23

Menu Operations

Press <LEFT> <1> <6> to select Speed Dial and display the speed dial
number list, as shown in the following figure:

Speed Dial

02: <empty>

03: <empty>
…

Options Cancel

z To assign a phone number, press <UP>/<DOWN> to highlight the

desired speed dial number and press <SELECT>. The phone book
entry list will be displayed. Press <UP>/<DOWN> to highlight the
desired entry, and then press <SELECT> to view the phone number of
the entry. When the desired phone number is displayed, press
<SELECT> to assign the phone number to the speed dial number

z To cancel a speed dial setting, press <UP>/<DOWN> to highlight the

target speed dial number. Press <LEFT> and then press <1> to select

Remove. Press <LEFT> to confirm and complete the operation

z To cancel all speed dial settings, press <LEFT> and then press <2> to

select

Remove All. Press <LEFT> to confirm and complete the

operation

Use Speed Dial

In standby mode, key in a 2-digit speed dial number and press the <#>
key. The corresponding phone number will be displayed

4.1.7 Memory State

Select this option to view the phone book capacity (Total and Free):

Press <LEFT> <1> <7> to access the

Memory State option

24

Menu Operations

4.2 Short Message Service (SMS)

The phone supports transmitting and/or receiving simple text or voice
messages

In standby mode, press <LEFT> to access the phone menu. Press <2> to
access the
following figure:

4.2.1 Voice Mail

Select this option to check voice messages

4.2.2 New Message

Select this option to send a new message:

Press <LEFT> <2> <2> to select
shown in the following figure:

Messages submenu and display options shown in the

1 Voice Mail

2 New Message

3 Inbox

4 Outbox

5 Delete Message

New Message and display options

25

Menu Operations

1 [New Address]

2 [Message]

Send Option

Press <1> to select New Address. Key in the receiver’s phone number
and press <LEFT>. Press <2> to select
contents and press <LEFT>. Press <LEFT> to send the message

To perform other operations, press <RIGHT> and select from

Priority, Callback and Save, as shown in the following figure:

Message. Enter the message

Contact,

1 [New Address]

2 [Message]

Close

z Contact: Select this option to access the phone book entry list and

select the message receiver

z Priority: Select this option to set the message priority

z Callback: Select this option to set the Callback function

z Save: Select this option to save the message

1 Contact

2 Priority

3 Callback

4 Save

26

Menu Operations

4.2.3 Inbox

Received messages are stored in the phone Inbox. A total of 200
messages can be stored in the Inbox and Outbox

There is an icon in front of each message:
not yet been read;

are listed chronologically, with the most recently received message
highlighted at the top of the list

When a new message is received, press <SELECT> to view the message
contents and details (the sender and received time).

z To save the sender’s phone number, call the sender or erase the

message, press <RIGHT> and then select

him/her or Erase

z To forward or reply to the message, press <LEFT>, as shown in the

following figure:

indicates the message has been read. Messages

Message From:

13332885955

XXXXXXXX…

Received at:

11:16:16 10/10/04

Send to

Options

indicates the message has

Save address, Call

27

Menu Operations

1 [New Address]

2 XXXXXXXXX…

3 13332885955

Send Option

4.2.4 Outbox

Sent messages are stored in the phone Inbox

Press <LEFT> <2> <4> to select
displayed. There is an icon in front of each message:
message sending succeeded;

Messages are listed chronologically, with the most recently sent message
highlighted at the top of the list

Press <UP>/<DOWN> to reach the desired message and press
<SELECT>. The message contents and details will be displayed

z To save the receiver’s phone number, call the receiver or erase the

message, press <RIGHT> and then select

him/her or Erase

z To forward or reply to the message, press <LEFT>

Outbox; the sent message list will be

indicates the

indicates the message sending failed.

Save address, Call

4.2.5 Delete Messages

Select this option to delete all received messages, sent messages, or to
delete all

Press <LEFT> <2> <5> to select
shown in the following figure will be displayed:

Delete Messages and the options

28

Menu Operations

1 Inbox

2 Outbox

3 Delete All

Press the corresponding number key to select the desired option and
press <LEFT> to complete the deletion

29

Menu Operations

4.3 Recent Calls

The phone records missed, received and dialed calls as well as their call
durations

Press <LEFT> <3> to select
following figure will be displayed:

1 Incoming Calls

2 Outgoing Calls

3 Missed Calls

4 Delete Lists

4.3.1 Incoming Calls

This option enables you to view the last 30 received calls

Press <LEFT> <3> <1> to select
list will be displayed. Press <UP>/<DOWN> to reach the desired entry.
Press <LEFT>, to select:

4.3.2 Outgoing Calls

This option enables you to view the last 30 outgoing calls

Press <LEFT> <3> <2> to select
list will be displayed. Press <UP>/<DOWN> to reach the desired entry.
Press <LEFT>, to select:

Recent Calls, and the options shown in the

Recent Calls

Incoming Calls and the incoming call

Details, Send Message, Delete or Delete All

Outgoing Calls, and the outgoing call

Details, Send Message, Delete or Delete All

4.3.3 Missed Calls

This option enables you to view the last 30 missed calls

Press <LEFT> <3> <3> to select
will be displayed. Press <UP>/<DOWN> to reach the desired entry. Press

Missed Calls, and the missed call list

30

Menu Operations

<LEFT>, and then you can select Details, Send Message, Delete or

Delete All

4.3.4 Delete Lists

This option enables you to delete all call records
Press <LEFT> <3> <4> to select
complete the deletion

Delete Lists, and then press <LEFT> to

31

Menu Operations

4.4 Tools

From this submenu, you can use the Schedule, Alarm Clock or Voice
Memo function

Press <LEFT> <4> to select
figure will be displayed:

1 Schedule

2 Alarm Clock

3 Voice Memo

4.4.1 Schedule

This option enables you to set daily schedules as well as alarm reminders
for these schedules

When a schedule’s preset alarm time expires, the phone will sound the
alarm; the schedule contents will be displayed. To dismiss the alarm and
return to standby mode, press any key

Press <LEFT> <4> <1> to select
following figure will be displayed

1 New

2 List

3 Clear

Tools, and the options shown in the following

Tools

Schedule, and options shown in the

32

Menu Operations

4.4.1.1 New

Select New to set a new schedule. A calendar will be displayed. Press
<UP>/<DOWN> or <LEFT>/<RIGHT> to reach the desired date, and then
press <SELECT>. Enter the schedule contents and press <LEFT>. Key
the alarm time for the schedule, and then press <LEFT> to confirm and
complete the operation

4.4.1.2 List

Select List to display the schedule list. Press <UP>/<DOWN> to highlight
the desired schedule entry

z To view contents of the schedule, press <RIGHT>

z To delete this schedule, press <LEFT>. Then, press <LEFT> again to

complete the deletion

4.4.1.3 Clear

This option enables you to delete all schedules

Clear and then press <LEFT> to complete the deletion

Select

4.4.2 Alarm Clock

This function enables you to set the alarm for a specified time. Once
activated, the alarm indicator

If the alarm function is active, the alarm will sound every day at the preset
time, and an alarm icon and the current time will be displayed. The alarm
will sound for 30 seconds unless you dismiss it. To dismiss the alarm and
return to standby mode, press any key

Press <LEFT> <4> <2> to select
screen will be displayed. If the alarm function is activated,
be displayed; if the alarm function is deactivated,
displayed

will be displayed

Alarm Clock, and the alarm setting

Alarm On will

Alarm Off will be

33

Menu Operations

z To change the alarm time and activate the alarm function, press

<RIGHT>. Enter the alarm time in 24-hour format, and then press
<LEFT> to confirm and complete the operation

z When Alarm Off is displayed, you can press <LEFT> to activate the

alarm function without changing the alarm time

z When Alarm On is displayed, you can press <LEFT> to deactivate the

alarm function

4.4.3 Voice Memo

This option enables you to record voice memos and auto-answer
messages, or to listen to voice messages

Press <LEFT> <4> <3> to select
following figure will be displayed:

1 Memo List

2 Voice List

3 Answering Rec.

4.4.3.1 Memo List

The phone can record 10 voice memos via the microphone or speaker
phone. Each voice memo can be up to 30 seconds in length

Press <LEFT> <4> <3> <1> to select
be displayed, as shown in the following figure:

Schedule, and the options shown in the

Voi ce Mem o

Memo List; the voice memo list will

34

Menu Operations

Memo List

1 Voice Memo 1

2 Voice Memo 2

…

New

z To record a new voice memo, press <LEFT>. Press <LEFT> again to

start to record. Press <LEFT> to complete the record

z To delete all voice memos, press <RIGHT>, and then press <LEFT>

to complete the deletion

z To listen to or erase a voice memo, press <UP>/<DOWN> to highlight

the memo and press <SELECT>. Details of the memo will be
displayed. Press <LEFT> or <RIGHT> to play or erase the voice
memo

Record Start at:

2004-10-10 12:14:56

End at:

2004-10-10 12:15:26

Memo length: 30s

Delete All

Play Erase

35

Menu Operations

4.4.3.2 Voice List

The phone can store up to 10 caller voice messages

If the auto-answer recording function is active, the phone will
automatically record the caller’s voice after the phone rings three times. A
maximum of 10 voice messages can be recorded. Each message can be
up to 30 seconds in length

Press <LEFT> <4> <3> <2> to select
will be displayed, as shown in the following figure:

1 Voice Memo 1

2 Voice Memo 2

…

Delete All

z To listen to or erase a voice message, press <UP>/<DOWN> to

highlight the voice message and then press <SELECT>. Details of the
voice message will be displayed. Press <LEFT> or <RIGHT> to play
or erase the voice memo

z To delete all voice memos, press <RIGHT>, and then press <LEFT>

to confirm and complete the deletion

Voi c e Li s t; the voice message list

Voice List

4.4.3.3 Answering Rec.

The phone can record three auto-answer voice messages. If the
auto-answer recording function is enabled, the phone will play the
auto-answer voice message when it is called

36

Menu Operations

Press <LEFT> <4> <3> <3> to select “Answering Rec.”; the voice
message list will be displayed, as shown in the following figure:

Answering Rec.

1 Answering 1

2 Answering 2

3 Answering 3

Press <UP>/<DOWN> to highlight the desired auto-answer message, and
press <SELECT>. The corresponding auto-answer message will be
played. To replace this message, press <LEFT> and record a new
auto-answer message. Press <LEFT> to complete the record

Now you can record.

Waiting

Record

37

Menu Operations

4.5 Settings

From this submenu, you can perform various phone settings

Press <LEFT> <5> to select
following figure will be displayed:

1 Sounds

2 Display

3 Security

4 Call Setup

5 Dial Delay Time

6 1x Data

7 Network Service

8 Phone Info

4.5.1 Sound

This option enables you to customize the phone alert settings

Press <LEFT> <5> <1> to select
following figure will be displayed:

1 Ringer

2 Volume

3 Alert

Settings, and the options shown in the

Settings

Sound, and the options shown in the

Sounds

38

Menu Operations

4.5.1.1 Ringer

This option enables you to specify ring tones for incoming calls and
alarms

Press <LEFT> <5> <1> <1> to select
the following figure will be displayed

1 In Contacts

2 Not In Contacts

3 Alarm Clock

In Contacts

Select In Contacts to specify a ring tone for incoming calls from the
phone numbers that have been stored in the phone book

Press <UP>/<DOWN> to scroll through the ring tones and listen to a
sample of each. After highlighting the desired ring tone, press <SELECT>
to confirm and complete the operation

Not In Contacts

Select Not In Contacts to specify a ring tone for incoming calls from the
phone numbers that are not stored in the phone book

Press <UP>/<DOWN> to scroll through the ring tones and listen to a
sample of each. After highlighting the desired ring tone, press <SELECT>
to confirm and complete the operation

Ringer, and the options shown in

Ringer

MUSIC1

39

Menu Operations

Alarm Clock

Select In Contacts to specify an alarm tone for the alarm clock

Press <UP>/<DOWN> to scroll through the alarm tones and listen to a
sample of each. After highlighting the desired alarm tone, press
<SELECT> to confirm and complete the operation

4.5.1.2 Volume

This option enables you to set volumes for Ringer, Key Beep, Handset
(Receiver) and Handfree (Speaker Phone)

Vol um e

1 Ringer

2 Key Beep

3 Handset

4 Handfree

Press <LEFT> <5> <1> <2> to select
the above figure will be displayed. Select the desired option. Press
<UP>/<DOWN> to scroll through the volume levels and listen to a sample
of each. After highlighting the desired volume level, press <SELECT> to
confirm and complete the operation

4.5.1.3 Alert

Users can enable or disable the alert. Options can be configured as
displayed in the following screen:

This option enables you to activate or deactivate Service Change, Minute
Beep, Call Connect and Power On/Off alert functions

Med

Vol ume, and the options shown in

40

Menu Operations

Alert

1 Service Change

2 Minute Beep

3 Call Connect

4 Power On/Off

Press <LEFT> <5> <1> <3> to select
above figure will be displayed. Select the desired option. Press
<UP>/<DOWN> to highlight
confirm and complete the operation

Off

Alert, and the options shown in the

On or Off, and then press <SELECT> to

4.5.2 Display

Press <LEFT> <5> <2> to select Display; options shown in the following
figure will be displayed:

Display

1 Banner

2 Backlight

3 Language

4 Hyphen

Welcome

41

Menu Operations

4.5.2.1 Banner

This option enables you to specify the text displayed in standby mode

Press <LEFT> <5> <2> <1> to select
(20 characters maximum), and then press <LEFT> to confirm and
complete the operation

The default banner is “welcome”

4.5.2.2 Backlight

If the Backlight function is active, the LCD screen will light when you press
keys or the phone receives a call or message

This option enables you to define how long the backlight will last after the
last keystroke, or to deactivate (Always off) the Backlight function

Press <LEFT> <5> <2> <2> to select
to highlight
then press <SELECT> to confirm and complete the operation

4.5.2.3 Language

This option enables you to select the language of the phone’s text display

Press <LEFT> <5> <2> <3> to select
to highlight
confirm and complete the operation

4.5.2.4 Hyphen

If this function is active, when you dial a number with more than six digits,
a hyphen will be inserted before the last four digits; for remaining digits,
every three digits will be led by a hyphen

For example, “11234567890” will be displayed as “1-123-456-7890”

Press <LEFT> <5> <2> <4> to select
deactivate or activate this function

7 Seconds, 15 Seconds, 30 Seconds or Always off, and

English or Español (Spanish), and then press <SELECT> to

Banner. Enter the banner contents

Backlight. Press <UP>/<DOWN>

Language. Press <UP>/<DOWN>

Hyphen. Then, select no or yes to

42

Menu Operations

4.5.3 Security

Press <LEFT> <5> <3> to select Security. You will be prompted to enter
the security code. Key in the security code and press <SELECT>. If
correct, options shown in the following figure will be displayed:

Security

1 Lock Phone

2 Change Password

3 Load Default

4.5.3.1 Lock Phone

If the phone is locked, you cannot operate the phone before entering the
security code

After accessing the
Press <UP>/<DOWN> to highlight
then press <SELECT> to confirm and complete the operation

z Unlock: Select this option to deactivate phone lock function

z Lock: Select this option to lock the phone immediately. To unlock the

phone, press <RIGHT>. Enter the security code and press <SELECT>

z On Power Up: If this option is selected, after the phone is switched on,

the phone will prompt you to enter the security code

Security option, press <1> to select Lock Phone.

Unlock

Unlock, Lock or On Power Up, and

43

Menu Operations

4.5.3.2 Change Password

This option enables you to change the security code

After accessing the

Security option, press <2> to select Change

Password

1. Enter a new security code, and then press <SELECT>

2. Enter the new security code again and press <SELECT> to confirm
and complete the operation

z The security code is “0000” by default

z If the new security code entered in step 2 is different from that entered

in step 1, when you press <SELECT>, the message

Lock Code does

not match will be displayed

z To avoid any inconvenience, please remember the new security code

4.5.3.3 Load Default

This option enables you to restore the phone’s default settings

After accessing the

Security option, press <3> to select Load Default.

The following settings will be restored:

Functions Default Settings

Alarm function Off

In contacts ring type Music 1

Not In Contacts Ring Type Music 2

Alarm Ring Type Music 3

Ring Volume Med

Key Beep Volume Med Low

Handfree Volume High Med

Handset Volume High Med

44

Menu Operations

Functions Default Settings

Power On/Off Alert On

Other Alerts Off

Banner Welcome

Backlight 7 Seconds

Language English

Hyphen No

Network Service Off

Security Code 0000

4.5.4 Call Setup

Press <LEFT> <5> <4> to select Call Setup, and the options shown in
the following figure will be displayed:

Call Setup

1 Auto Answer

2 Answering Sel.

3 Voice Privacy

4.5.4.1 Auto Answer

Press <LEFT> <5> <4> <1> to select Auto Answer. Press
<UP>/<DOWN> to highlight

Machine, and then press <SELECT> to confirm and complete the

operation

z Off: Select this option to deactivate the Auto Answer function

Off

Off, After 3 seconds or Answering

45

Menu Operations

z After 3 seconds: If this option is selected, the phone will answer an

incoming call after three seconds of ringing

z Answering Machine: If this option is selected, an external answering

machine can be connected to the phone

4.5.4.2 Answer Sel.

This option enables you to specify auto-answer voice messages. You can
select from the default setting and three self-recorded voice messages

Press <LEFT> <5> <4> <2> to select
to highlight the desired option, and then press <SELECT> to confirm and
complete the operation

4.5.4.3 Voice Privacy

This function requires network support

Press <LEFT> <5> <4> <3> to select
<UP>/<DOWN> to highlight
<SELECT> to confirm and complete the operation

Answer Sel. Press <UP>/<DOWN>

Voice Privacy. Press

Enhanced or Standard, and then press

4.5.5 Dial Delay Time

While making a call, if you press no keys for a certain period of time, the
dialed number will be called automatically. This option enables you to set
the time duration (seconds)

Press <LEFT> <5> <5> to select
to highlight
complete the operation

the desired option, and then press <SELECT> to confirm and

Dial Delay Time. Press <UP>/<DOWN>

~ Note: If 0 is selected, this function will be deactivated. While making

a call, you must press the <SND/RDL> key to call the dialed number

4.5.6 1x Data

Press <LEFT> <5> <6> to select 1x Data, and the options shown in the
following figure will be displayed:

46

Menu Operations

1x Data

1 Data/Fax

2 Port Speed

Off

4.5.6.1 Data/Fax

This option enables you the define the phone’s Data/Fax status

Press <LEFT> <5> <6> <1> to select

Data/Fax. Press <UP>/<DOWN> to

highlight the desired option, and press <SELECT> to confirm and
complete the operation

z Off: Select this option to deactivate the Data/Fax function

z Fax In Once: If this option is selected, the next incoming call will be a

fax call

z Fax In Always: If this option is selected, all incoming calls will be fax

calls

z Data In Once: If this option is selected, the next incoming call will be a

data call

z Data IN Always: If this option is selected, all incoming calls will be

data calls

4.5.6.2 Port Speed

This option enables you change the phone’s port speed

Press <LEFT> <5> <6> <2> to select
to highlight

9600, 19200 (for data and fax calls), 115299 (for Internet) or

Port Speed. Press <UP>/<DOWN>

230400, and then press <SELECT> to confirm and complete the

operation

z The default port speed is “115200”

47

Menu Operations

4.5.7 Network service

Press <LEFT> <5> <7> to select Network Service, and the options
shown in the following figure will be displayed:

Network Service

1 Call Forward

2 Call Waiting

3 CNIR

4.5.7.1 Call Forward

Through this option, the phone can be set to forward incoming calls to the
specified phone number. The Call Forward function requires network
support

Press <LEFT> <5> <7> <1> to select
shown in the following figure will be displayed:

Call Forward

1 FWD If Busy

2 FWD If No Answer

3 FWD All Calls

Call Forward, and the options

z FWD If Busy: If this function is activated, when another call comes in

during a call, the incoming call will be forwarded to the specified phone
number

48

Menu Operations

z FWD If No Answer: If this function is activated, when there is an

incoming call that remains unanswered for a period of time, the call will
be forwarded to the specified phone number

z FWD All Calls: If this function is activated, all incoming calls will be

forwarded to the specified phone number

After accessing the Call Forward option, press <1>, <2> or <3> to select

FWD If Busy, FWD If No Answer or FWD All Calls. Then, you can

perform the following operations:

z To deactivate the selected function, press <1> to select Disable. The

phone will initiate a call to the network and display the outgoing
number

z To activate the selected function, press <2> to select Enable. Follow

the prompts to key in the forwarding number and press <LEFT>. The
phone will automatically make calling connections with the network
and will display the outgoing number

4.5.7.2 Call Waiting

Press <LEFT> <5> <7> <2> to select Call Waiting, and then press <1> or
<2> to deactivate or activate the Call Waiting function

z This function requires network support

4.5.7.3 CNIR (Calling Number Identification Restriction)

If this function is active, when you dial a call, your phone number will not
be displayed on the called party’s phone. This function requires network
support

Press <LEFT> <5> <7> <3> to select
<UP>/<DOWN> to highlight

Enable or Disable, and then press

Call Waiting. Press

<SELECT> to confirm and complete the operation

4.5.8 Phone Info

Press <LEFT> <5> <8> to select Phone Info, and the options shown in
the following figure will be displayed:

49

Menu Operations

Phone Info

1 Phone Number

2 SW Version

4.5.8.1 Phone Number

This option enables you to store the phone’s number

Press <LEFT> <5> <8> <1> to select
number, and press <LEFT> to confirm and complete the operation

4.5.8.2 SW Version

This option enables you to view the phone’s software information

After accessing the

SW Version option, the phone’s software version information will be

the
displayed in the lower message box

This option enables you to store the phone’s number

Press <LEFT> <5> <8> <1> to select
number, and press <LEFT> to confirm and complete the operation

Phone Info option, press <UP>/<DOWN> to highlight

0.2.0

Phone Number. Enter the phone

Phone Number. Enter the phone

50

Data Service

5. DATA SERVICE

The phone supports Data Service. Data or facsimile information can be
transmitted and received via a wireless path, by connecting the phone to a
notebook or desktop PC

5.1 Hardware Connection

Serial Port 0

C800

Serial Port 2

Switch

Data Cable

PC

5.2 Internet

5.2.1 Computer Configuration

Download the Automatic Configuration software from:

http://www.gpte.com.cn/product/p34.htm

Extract the files to a folder. Then, perform the following operations:

5.2.1.1 AirAccess Kit Installation

1. Double click “setup.exe” from the extracted folder; the “AirAccess Kit
Setup Wizard” window will be displayed:

51

Data Service

2. Follow the window prompt to click <Next>; the “Select Installation
Folder” window will be displayed:

52

Data Service

3. Click <Next> to accept the default installation folder. (Or, click
<Browse> to specify a different folder, and then click <Next>.) The
“Confirm Installation” window will be displayed:

4. Follow the window prompts, click <Next> to start the installation

53

Data Service

5. When the “Installation Complete” window is displayed, click <Close>
to complete the installation

After completing the installation, you can double click the
Kit” shortcut icon on the desktop to run

AirAccess Kit

“AirAccess

5.2.1.2 Modem Driver Installation

When you run AirAccess Kit for the first time, if the CBP4.0 Modem Driver
has not been installed on the computer, the executive program will prompt
you to install the CBP4.0 Modem Driver. The following window will be
displayed:

54

Would you like to do it now?

Data Service

1. Click <Yes> to display the “Phone and Modem Options” window:

2. Click <Add> to display the “Add Hardware Wizard” window:

55

Data Service

3. Select “Don’t detect my modem. I will select it form a list”, and then
click <Next>

4. Click <Have Disk> to display the “Install From Disk” window

56

Data Service

5. Type the directory name of the AirAccess Kit installation folder or click
<Browse> to locate the directory. Then, click <OK> to display the
following window:

6. Click <Next> to display the following window:

57

Data Service

7. Select the desired port(s), and then click <Next> to start the
installation. The “Digital Signature Not Found” window will be
displayed:

8. Click <Yes> to continue the installation. The following window will be
displayed

58

Data Service

9. Click <Finish> to complete the installation. The installed modem will
be displayed in the “Phone and Modem Options” window:

10. Click <OK> to confirm and complete the operation

5.2.1.3 Dial-up Connection

After Modem Driver installation, the system will automatically establish a
dial-up connection icon. Double click the icon to dial up

59

Data Service

Enter the Internet access number (for example T#777 or #777), and click
<Dial

>

Then, enter the user name and password to access the network. When
connected, you can surf the Internet, send and receive E-mail, use Telnet,
FTP and more

5.3 Data Fax

Using the following configuration, you can use fax software to send and
receive digital G3 faxes

5.3.1 Computer Configuration

Install a standard 19.2 Kbps modem. Set the port rate to 19.2 Kbps,
instead of 115.2 Kbps

Install fax software (either WinFax or Faxpro is recommended). Ensure
the modem is properly configured

5.3.2 Phone Configuration

Switch the “SerialChoice” button on the phone to “InterNet”

From the phone menu, set the
Speed”)

To receive a fax, set the Data/Fax option to Fax In Once (see “Data/Fax”)

Port Speed option to 19200 (see “Port

60

Text Input Method

A

6. TEXT INPUT METHOD

The phone supports three input methods, including Uppercase Letter,
Lowercase Letter and Digit in order to provide easy input for letters and
digits in text editing mode

6.1 Switch Input Method

When you enter text-editing mode, the last active input method is
displayed. Press <#> to switch between the input methods. The current
input method indicator will be displayed at the upper right side of the
screen and include:

Input Method Indicator

Uppercase Letter

Lowercase Letter

Digit

6.2 Uppercase/Lowercase Letter

1. In Uppercase/Lowercase Letter input mode, press <2> ~ <9>
repeatedly until the intended letter on the key appears

2. After you have entered the intended letter, press the appropriate key to
input the next letter. If the next letter and current letter share the same
key, press <DOWN> and then enter the next letter; or simply wait for
one second to input again

3. To enter a space, press <0>

BC

abc

123

6.3 Digit

In Digit input mode, press the number keys <0> ~ <9> to enter the
corresponding digits

61

Text Input Method

6.4 Symbol

To enter symbols in text-editing mode, press <*>. The symbol list will be
displayed. Press <UP>/<DOWN> to highlight the intended symbol, and
then press <SELECT> to enter the selected symbol

62

UTStarcom, Inc. USA

1275 Harbor Bay Parkway Alameda, CA 94502, USA

Tel. [phone] Fax. [phone]

China

Building 3,

Yile Industrial Park

No. 129, Wenyi Road,

Hangzhou 310012 PRC

[phone]

Europe

Campus Kronberg 7,

61476 Kronberg

Germany

[phone]

Copyright © 2004, UTStarcom, Inc. All rights reserved.
May not be reproduced without prior written permission.

India

805 Signature Towers B,

South City I

Gurgaon,

Haryana 122001

[phone]

Latin America

2801 SW 149th Ave

Suite 100

Miramar, FL 33027, USA

954-447-3077

Japan

TT-2 Building 8th Floor,

3-8-1 Nihonbashi

Ningyo-cho, Chuo-ku, Tokyo,

Japan

[phone]