UTStarcom F1000 Vonage Handbook
F1000 Series
F1000 Series
www.utstar.com
i
_______________________________________
Copyright Statement: “© 2005 UTStarcom, Inc. All rights reserved. No
part of this publication may be reproduced in any form or by any means
without the prior written permission of UTStarcom, Inc.”
Warranty Language: “The contents of this handbook, whether in whole
or in part, do not constitute any express or implied warranty with respect
to any products of UTStarcom, Inc., or its affiliates.”
Doc. Code: 8810027700.0510
Table of Contents
SAFETY PRECAUTIONS.................................................... 1
REGULATORY STATEMENT (R&TTE / WLAN IEEE 802.11B) ................1
CE DECLARATION OF CONFORMITY .....................................................1
FCC RF EXPOSURE COMPLIANCE.......................................................2
HANDLING THE PHONE, BATTERY AND CHARGER ..................................3
HANDLING THE PHONE ........................................................................4
HANDLING THE BATT ERY ......................................................................6
HANDLING THE CHARGER ....................................................................7
1. GETTING STARTED ....................................................... 8
1.1 CONVENTIONS USED IN THIS HANDBOOK........................................ 8
1.2 PACKAGE CONTENTS.....................................................................9
1.3 PHONE SPECIFICATIONS .............................................................. 10
1.4 HANDSET DESCRIPTION............................................................... 11
1.5 DISPLAY INDICATORS ................................................................... 12
1.6 CHARGE THE BAT TERY ................................................................13
1.7 REPLACE THE BAT TERY ...............................................................15
1.8 ACCESS MENU/LIST OPTIONS ......................................................17
2. BASIC OPERATIONS ................................................... 18
2.1 SWITCH THE PHONE ON/OFF .......................................................18
2.2 MAKE A CALL .............................................................................. 18
2.3 USE SPEED DIAL ......................................................................... 19
2.4 ANSWER A CALL ..........................................................................19
2.5 REJECT A CALL ...........................................................................19
2.6 CALLING FEATURES..................................................................... 20
2.6.1 Hold a Call .....................................................................................20
2.6.2 Call Waiting....................................................................................20
2.6.3 Make a New Call............................................................................21
2.6.4 Conference Call.............................................................................22
2.6.5 Transfer a Call ...............................................................................23
2.6.6 Call Return.....................................................................................23
ii
iii
2.6.7 Caller ID Block...............................................................................23
2.6.8 Repeat Dial on Busy ......................................................................24
2.6.9 Mute the Microphone Volume ........................................................24
2.6.10 Access the Phonebook ................................................................24
2.6.11 Adjust the Listening Volume .........................................................25
2.7 STORE A PHONE NUMBER............................................................ 25
2.8 CALL LOG SHORTCUT.................................................................. 26
2.9 CUSTOM FUNCTIONS SHORTCUT .................................................26
2.10 CURRENT PROFILE SHORTCUT ..................................................27
2.11 VIBRATION SHORTCUT ...............................................................27
2.12 KEYPAD LOCK ...........................................................................27
3. PHONEBOOK (NAMES) ............................................... 28
3.1 SEARCH...................................................................................... 28
3.1.1 Edit ................................................................................................29
3.1.2 Delete Entry...................................................................................29
3.2 ADD ENTRY................................................................................. 29
3.3 DELETE ENTRY ...........................................................................31
3.3.1 One by One ...................................................................................31
3.3.2 All...................................................................................................31
3.4 GROUP INFO ...............................................................................31
3.4.1 Ring Tone.......................................................................................32
3.4.2 Browse...........................................................................................32
3.5 SPEED DIAL ................................................................................32
3.6 MEMORY.....................................................................................33
4. MENU ............................................................................ 34
4.1 CALL LOG ...................................................................................34
4.1.1 Missed Log ....................................................................................34
4.1.2 Received Log.................................................................................36
4.1.3 Dialed log.......................................................................................37
4.1.4 Delete Log .....................................................................................38
4.1.5 Duration .........................................................................................38
4.2 PROFILES ...................................................................................39
4.2.1 Standard ........................................................................................39
4.2.2 Meeting..........................................................................................41
iv
4.2.3 Outdoor..........................................................................................41
4.2.4 User Define....................................................................................41
4.3 SETTINGS ...................................................................................42
4.3.1 Scheme .........................................................................................42
4.3.2 Date/Time ......................................................................................44
4.3.3 Answer Mode .................................................................................44
4.3.4 Language.......................................................................................45
4.3.5 Display...........................................................................................45
4.3.6 Set Security ...................................................................................47
4.3.7 Input Method..................................................................................50
4.4 TOOLS ........................................................................................51
4.4.1 Calculator ......................................................................................51
4.4.2 Calendar ........................................................................................52
4.4.3 Alarm .............................................................................................52
4.4.4 Time Zone......................................................................................53
4.4.5 DST Setting ...................................................................................54
4.4.6 Time Format...................................................................................54
4.5 WIFI-SETTINGS...........................................................................55
4.5.1 Net Search.....................................................................................55
4.5.2 WiFi Config ....................................................................................56
4.5.3 Web Configuration .........................................................................58
4.5.4 Network Parameter........................................................................63
4.6 MISC .........................................................................................66
4.6.1 Vendor Information.........................................................................66
4.6.2 PC Config ......................................................................................66
4.6.3 Local TFTP Update........................................................................66
4.6.4 Local Log .......................................................................................67
4.6.5 Factory Reset ................................................................................67
5. INPUT METHOD............................................................ 68
5.1 SWITCH INPUT METHOD............................................................... 68
5.2 PINYIN AND SIM STROKE ............................................................. 68
5.3 ENGLISH ..................................................................................... 68
5.4 LETTER....................................................................................... 70
5.5 DIGIT .......................................................................................... 71
6. TROUBLESHOOTING................................................... 72
Safety Precautions
SAFETY PRECAUTIONS
Regulatory Statement (R&TTE / WLAN IEEE
802.11b)
European standards dictate maximum radiated transmit power of 100mW
EIRP and frequency range 2.400-2.4835GHz; In France, the equipment
must be restricted to the 2.4465-2.4835GHz frequency range and must be
restricted to indoor use.
CE Declaration of Conformity
For the following equipment: WiFi handset F1000
Is herewith confirmed to comply with the requirements set out in the
Council Directive on the Approximation of the Laws of the Member States
relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage
Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the
procedures given in European Council Directive 99/5/EC and
89/3360EEC.
The equipment was passed. The test was performed according to the
following European standards:
EN 300 328 V.1.4.1 (2003-04)
EN 301 489-1 V.1.3.1 (2001-09) / EN 301 489-17 V.1.1.1 (2000-09)
EN 50371: 2002
EN 60950: 2000
1
Safety Precautions
FCC RF Exposure Compliance
This PCS phone has been tested and complies with the Federal
Communications Commission (FCC) RF exposure limits for the General
Population/Uncontrolled exposure environment. In addition, it complies
with the following Standards and Guidelines:
FCC 96-326, Guidelines for Evaluating the Environmental Effects of
Radio-Frequency Radiation
FCC OET Bulletin 65 Edition 01-01 (2001) Supplement C, Evaluating
Compliance with FCC Guidelines for Human Exposure to Radio
Frequency Electromagnetic Fields
ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with
Respect to Human Exposure to Radio Frequency Electromagnetic
Fields, 3 kHz to 300 GHz
ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the
Measurement of Potentially Hazardous Electromagnetic Fields - RF
and Microwave
Note: For body-worn operation, this phone has been tested and
meets FCC RF exposure guidelines when used with an accessory
that contains no metal and when the back of the phone faces your
body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The antenna used for this transmitter must not be co-located or
must not operate in conjunction with any other antenna.
2
Safety Precautions
Handling the Phone, Battery and Charger
DANGER
Only use the battery and charger specified for the
phone. Failure to do so can result in damage to the
phone, electric shock or fire.
CAUTION
Do not store or operate the phone or charger in hot,
damp, or dusty areas, which can damage electrical and
mechanical components. Avoid prolonged exposure to
temperatures below 5°C or in excess of 35°C.
DANGER
Do not drop, shake or throw the phone or charger.
Rough handling can damage internal circuit boards and
the battery pack.
Do not use the phone in the vicinity of volatile gases.
Leave the area before using the phone. Failure to leave
the area can result in the risk of fire or an explosion.
Do not disassemble or modify the phone, charger, or
battery. Incorrect modifications, reassembly, or
tampering may result in malfunction or personal injury.
3
Safety Precautions
Handling the Phone
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference
This device must accept any interference received, including
interference that may cause undesired operation
DANGER
This phone has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This phone
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this phone does cause harmful interference to radio or
television reception, which can be determined by
turning the phone off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the phone and
receiver
- Connect the phone into an outlet on a circuit different
from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV
technician for help
Observe local regulations for specialized areas
(hospital, aircraft, etc) when using the phone.
4
Safety Precautions
Do not use the phone while operating a vehicle.
CAUTION
Changes or modifications not expressly approved by
UTStarcom, Inc. could void the user’s authority to
operate the phone.
Keep all storage media (magnetic cards, floppy disks,
credit cards, etc.) away from the phone. Close
encounters or contact can erase or damage the storage
media.
Keep all sharp metal objects (pins, nails, hairpins etc.)
away from the phone handset. The handset earpiece
contains a strong magnet that can attract and hold
metal objects. Remove any objects from the handset
earpiece before using, to avoid personal injury.
In case of emergency, key in the emergency number
(911 for example in US), then press the Talk key and let
the operator know your specific location. Don’t hang up
until you are told to do so.
5
Safety Precautions
Handling the Battery
DANGER
Do not dispose of the battery pack in a fire. It may
explode. Check with local waste management codes for
disposal instructions.
Do not force the battery pack into the phone. Improper
installation can cause malfunctions or damage the
battery pack. This may result in fire or personal injury.
Use caution in handling batteries in order not to short
the battery on conductive materials such as rings,
bracelets, and keys. The battery and/or conductor may
overheat and cause burns.
If the battery becomes too hot while recharging, it
should be removed immediately from the charger.
When clothes or skin are exposed to battery leakage,
rinse with clean water at once to prevent skin irritation.
Do not use a cracked, leaking or odor-emitting battery
pack near an open flame or high temperatures.
CAUTION
If a fully discharged battery is stored for a long period of
time, it may not be possible to recharge the battery.
Observe local waste management codes for proper
battery disposal instructions.
6
Safety Precautions
Handling the Charger
DANGER
Only use a power source that provides the appropriate
voltage (AC100-240 V) for the charger. An unsuitable
power source can result in damage to the charger, fire
or electric shock.
Do not use the charger if the power supply cord or plug
is damaged or frayed (exposed or broken wires, etc).
This can result in the risk of fire or electric shock.
Do not short circuit the charger connector jack. This may
result in fire or electric shock.
Immediately unplug the charger from the wall outlet in
the event that liquid is spilled into the unit to prevent fire
or electric shock.
CAUTION
Always unplug the charger from the wall outlet before
cleaning to avoid the risk of electric shock.
Do not place heavy objects on the cord to avoid
damage.
Always grip the power plug when removing the charger
from the wall outlet. Do not pull on the power supply
cord to avoid damage and the risk of electric shock.
7
Getting Started
1. GETTING STARTED
1.1 Conventions Used in this Handbook
In this handbook, “press the key” means to release the key after you
press it; “press and hold the key” means to press the key for over 2
seconds before releasing it
The text displayed on the screen is indicated in bold in this handbook,
for example Menu
Most operations need to be performed in standby mode. When the left
soft key function is Menu, the phone is in standby mode (refer to the
figure illustrated in “Display Indicators” on page 12)
Navigation key operations follow:
Press the “Up”, “Down”, “Left”, and “Right” directions on the
Navigation key to execute operations such as browsing, selecting,
adjusting and setup; key directions are as follows:
Up Down
Up or
Down
Left Right
Left or
Right
8
Getting Started
1.2 Package Contents
Please check the package contents by comparing them with the following
list. If you find anything missing or if the documentation set is incomplete,
contact your local phone dealer immediately.
Model F1000 (with one battery)
Charger (one)
Handbook (one)
Quick Start Guide (one)
Certificate of quality
9
Getting Started
1.3 Phone Specifications
Dimensions
About 107.8 x 44 x 23.5 (L×W×H) mm
Weight Approximately 100g
Battery DC 3.6V 1500mAh Li-ion battery
Charger
Input: 100-240V AC, 50-60Hz
Output: 5.2V DC, 600mA
Charger Weight Approximately 80g
Charging Time 3-4 hours
Standby Time 50-100 hours
Talking Time Approximately 5 hours
Standby time refers to the state in which the phone is on continuously
without being used for calls, or moved to different service areas
The standby time depends on the network conditions, phone usage
and surrounding area. The phone consumes more battery power
under the following conditions:
- In areas with weak signals, with high or low temperatures, or when
used outside the service coverage area
- When the phone frequently searches for network signal due to
location changes
- When you talk on the phone for long periods of time
- The Alarm, Backlight or Vibration function is active
- Ring or listening volume is set to maximum
10
Getting Started
1.4 Handset Description
Functionality of Keys:
4-Way Navigation Key:
This key is used to scroll up and down through menu lists.
Left Soft Key:
This key is used to perform the function indicated on the screen above
it.
Talk Key:
This key is used to make or receive a call. It can also be used to
access outgoing call logs in standby mode.
- Number Keypad:
These keys are used to enter numbers and characters.
11
Getting Started
* Key/Switch Key:
This key is used to key in “*” or change the text input method.
Right Soft Key:
This key is used to perform the function indicated on the screen above
it.
Power Key:
This key is used to switch the phone on and off, to end a call, or to
return to standby mode.
# Key/Lock Key:
Note: This is only a brief introduction to the keypad functions.
Please refer to the contents of this handbook for detailed
descriptions and operations.
1.5 Display Indicators
1 2 3 4 5 6 7
8
9
1.
Shows the current signal strength. The higher the bar, the stronger
the signal.
Strong Weak
12
Getting Started
2. Indicates a new voice mail has been received.
3.
Indicates the keypad is locked.
4. Means the ring mode is set to Mute; if the ring mode is set to
Ringing,
will be displayed.
5.
Means the ring mode is set to Vibration.
If you press and hold the vibration shortcut key
in standby
mode,
will be displayed (refer to “Vibration Shortcut” on page 27).
6. Indicates the Alarm function is active.
7.
Indicates the battery charge level. The higher the bar, the greater
the battery power.
High Low
8. Content Display Area: Shows phone numbers, characters, etc.
9. Soft key function display area: Shows the functions of the left soft key
and the right soft key .
1.6 Charge the Battery
When the battery power is low and needs recharging, the battery indicator
will flash continuously, and the phone will sound a low battery alarm
(if the alert tone is set to On), reminding you that the battery is running low
and the phone will be switched off automatically.
To charge the battery, follow the steps below:
13
Getting Started
1. Connect the charger to an AC wall outlet (100-240V).
2. Connect the lead from the charger to the charging socket of the phone.
The battery indicator bar starts to scroll (
). If
the phone is off, the text “Charging…” is also displayed on the LCD
screen.
3. When the battery indicator bar stops scrolling, charging is complete.
The text “Fully Charged!” is also displayed on the LCD screen, if the
phone is off.
The phone takes about 3-4 hours to charge and the exact time may
vary depending on the circumstances
With your phone turned off, charge your new battery for 4 hours before
its first use
When the battery is being charged, it is normal that your charger and
phone become warm to the touch
If the phone is turned on while charging, you can still make and
receive calls as usual, but this will consume battery power, thus
extending the charging time
14
Getting Started
1.7 Replace the Battery
Since battery power is easily consumed, if you find the battery power
diminishes quickly after full charging, please replace your battery.
1. In standby mode, switch the phone off by pressing and holding
.
(Otherwise, some user settings will be lost.)
2. Remove the battery cover.
With the back of the phone facing
you, press the battery cover
release button and lift the cover
off in the direction of the arrow.
3. Remove the old battery.
Disconnect the cord by firmly
gripping the connector (not the
battery connection wire) and
pulling gently as illustrated.
15
Getting Started
4. Install the new battery.
Connect the cord of the new battery by firmly inserting the connector
into its place. Do not reverse the connector.
5. Replace the battery cover until it clicks into place.
16
Getting Started
1.8 Access Menu/List Options
A variety of options are available for the menus and lists, such as: Menu
and Names.
For example, to access
SettingsAnswer Mode, follow the
steps below:
1. In standby mode, press the left soft key
(Menu).
2. Press
to reach Settings, and then press the left soft key
(Ok).
3. Press
to highlight Answer Mode, and then press the left soft key
(Ok).
Note: To return to the previous menu level, press the right soft key
(Exit). To return to standby mode without changing the menu
settings, press
.
If you stop operating the phone for two minutes, the phone will
return to standby mode without changing the menu settings.
If the screen saver is not set to Off, the clock screen saver will be
displayed after the phone has been in standby mode for one minute.
17
Basic Operations
2. BASIC OPERATIONS
2.1 Switch the Phone On/Off
Press and hold the power key . The phone will display the
power-on/off animation.
If the PowerOn Code function is active, after switching on the phone,
enter the security code (with each input displayed as *) and press the left
soft key
(Ok). If correct, the power-on animation will be displayed;
otherwise Code Error will be displayed.
2.2 Make a Call
Note: Prior to making or receiving calls, the phone must be
connected to a wireless Access Point (AP) and registered with the
Vonage network. See “WiFi-Settings” on page 55 for detailed
instructions.
1. Key in the phone number.
To delete the character or digit to the left of the cursor, press the right
soft key
(Clear). To move the cursor, press . To delete all the
numbers or characters, press and hold the right soft key
(Clear).
2. Press
to call the number. “Connecting..” will be displayed.
To cancel the call attempt, press the right soft key
(Cancel); a
time display of 00:00:00 will appear. You can also press the
key
to cancel the call; the phone will return to standby mode.
3. When the call is connected, the call timer is displayed.
4. To end the call, press the right soft key
(Hangup) or the key.
18
Basic Operations
2.3 Use Speed Dial
If you have assigned a phone number to one of the speed dial keys -
, you can quickly call that phone number:
1. In standby mode, press and hold the corresponding speed dial key to
automatically display the phone number.
2. Press to call the number.
For details of speed dial settings, refer to “Speed Dial” on page 32
2.4 Answer a Call
If the answer mode is set to Talk Key, press the left soft key
(Answer) or the
key to answer an incoming call
If the answer mode is set to Any Key, press any key to answer an
incoming call except the right soft key
, the key or the
key
When there is an incoming call, you may press to stop the
vibration or ring alert without picking up the call
To end an ongoing call, press the right soft key (Hangup) or the
key
2.5 Reject a Call
When there is an incoming call, press the right soft key (Hangup)
or the
key to reject the call
If you press the right soft key (Hangup) to reject an incoming call,
the call duration 00:00:00 will be displayed
19
Loading...