Uticor Tough Smart Marquee Selection Guide

Part Numbers and Specications

TSM - XXXXX - X - X - X - X - X - X

How to select Part Numbers and Order ?

1 2 3 4 5 6 7

1. Size of display, for example 4L20C ­ 4 Lines of 20 2” Characters

2. Red or Tricolor

3. Master or Slave

4. Option card for Master or Network Interface for Slave
Master options -
0 - No card selected, RS232 and RS422/485 ports
C - Mitsubishi CCLink
D - DeviceNet
E - Ethernet
H - DH+ and Remote I/O
M - Modbus Plus
N - Netview-Control and Data storage
P - Probus
Slave options -
0 - No card selected, RS232 and RS422/485 ports
D - DeviceNet
E - Ethernet
P - Probus

W for Welded housing

Model Dimension

(WxHxD)

Character

Height

Characters

Per Line

# of Lines Weight

2L10C 20” X 6.25” X 4.25” 2”/4” 10/5 2/1 20 lbs.

1L20C 40” X 4” X 4.25” 2” 20 1 30 lbs.

2L20C 40” X 11.5” X 4.25” 2”/4” 20/10 2/1 47 lbs.

4L20C 40” X 16.3” X 4.25” 2”/4”/6”/8”/8N 20/10/6/5/10 4/2/1/1/1 65 lbs.

8L20C 40” X 25.9” X 4.25” 2”/4”/6”/8”/8N 20/10/6/5/10 4/2/1/1/1 101 lbs.

2L40C 72” X 11.5” X 4.25” 2”/4” 40/20 2/1 81 lbs.

4L40C 76” X 16.3” X 4.25” 2”/4”/6”/8”/8N 40/20/13/10/20 4/2/1/1/1 112 lbs.

8L40C 76” X 25.9” X 4.25” 2”/4”/6”/8”/8N 40/20/13/10/20 4/2/1/1/1 178 lbs.

2L80C 150” X 11.5” X 4.25” 2”/4” 80/40 2/1 189 lbs.

4L80C 150” X 16.3” X 4.25” 2”/4”/6”/8”/8N 80/40/26/20/40 4/2/1/1/1 250 lbs.

Model Dimension

(WxHxD)

LED

Type

Character

Height

Characters

Per Line

# of Lines Weight

2L20C 37.05” x 7.28” x 4.18” Red 2”/4” 20/10 2/1 18 lbs.

4L20C 37.05” x 12.08” x 4.18” Red/Tricolor 2”/4”/6”/8”/8N 20/10/6/5 4/2/1/1 34 lbs.

2L40C 73.25” x 7.28” x 4.18” Red 2”/4” 40/20 2/1 34 lbs.

4L40C 73.25” x 12.08” x 4.18” Red/Tricolor 2”/4”/6”/8” 40/20/13/10 4/2/1/1 70 lbs.

“W” Welded Housing Dimension and Weights

“X” Aluminum Extrusion Housing Dimension and Weights

Model Housing

W - Welded

X- Extrusion

2L10C N or X or W

1L20C N or X or W

2L20C N or X or W

4L20C N or X or W

8L20C N or X or W

2L40C N or X or W

4L40C N or X or W

8L40C N or X or W

2L80C N or X or W

4L80C N or X or W

Available Housings

5. Type of enclosure,
N for Aluminium Nema 12,
X for Aluminum Nema 4,
W for Welded housing.

6. Housing Material,
A is always used when ‘N’ is used in pos.5,
X is always used when ‘X’ is used in pos.5,
C is for Cold Roll Steel when ‘W’ is used
in pos.5,
S is for Stainless Steel when ‘W’ is used
in pos.5

7. H - for high bright outdoor use marquee
0 - for normal brightness

All product names and trademarks are the property of their respective manufacturers.
Uticor disclaims any proprietary interest in the marks or names of others.

Tel:: [phone]

www.balmoral.net.au

15

Uticor Tough Smart Marquee