Utica Boilers UB95M-200 Parts list
UB95M-200
Gas-Fired Direct Vent
Modulating Hot Water Boiler
Repair Parts Manual
Ordering Instructions
Order Parts through your nearest supplier.
When ordering parts, obtain Model Number and Serial Number
from data plate on your boiler.
Include following information when ordering.
Part Number
Part Description
Boiler Model Number
Boiler Serial Number
An ISO 9001-2008 Certied Company
Manufactured by:
ECR International, Inc.
2201 Dwyer Avenue, Utica NY 13501
web site: www.ecrinternational.com
P/N# 240010068, Rev. B [11/2014]
JACKET AND BASE ASSEMBLY
5
4
6
7
3
8
2
1
9
2
JACKET AND BASE ASSEMBLY
Item
1
2
3
4
5
6
7
8 Front Panel Kit (*) 550001477
*Not Shown Jacket Replacement Kit (**) 550001322
*
**
Base Replacement Kit
Cross Bar Support
Left Side Panel Kit
Rear Panel Kit
Top Back Panel Kit
Top Front Panel Kit
Right Side Panel
Includes Item #9
Includes Items #2 - #9
DESCRIPTION Part No.
550001473
109005906
550001479
2370023AC
550001472
550001471
2370021AD
ACCESSORY KITS
KIT NO. DESCRIPTION
550001314 Honeywell AM (HAM) Accessory Module
550001315 Gas Conversion Kit (Natural To LP)
29571 3” Concentric Vent Kit, ULC S636
550001893 Left Side Combustion Air Intake Kit
3
BURNER/IGNITER ASSEMBLY
Item Part No. DESCRIPTION Qty
4 12101022 Blower Adapter 1
Kit # 550001938 (95MC-200 modulating burner replacement kit) includes:
1 240007052 Burner, Modulating, Worgas application 1
2 1250016 Grafoil Burner/Casting Gasket 1
3 1250015 Garfoil Burner/Flue Adapter Gasket 1
10 1450011 Stud Threaded ¼-20 x 1½” 5
11 14695810 Nut Hex w/Serrated Washer ¼”-20 5
Kit# 550001939 (95M-200 direct spark igniter replacement kit) includes:
5 240007051 Igniter, Direct Spark, Worgas application 1
6 1250014 Garfoil Igniter/Mixer application 1
7 14695004 Screw 8-32 x ⅜” Slot HWH Self-Tap 2
Kit# 550001329 (95M-200 modulating igniter cable Replacement kit) includes:
8 1240006 Grommet Igniter 1
9 1070001 Cable Igniter 1
4
EXHAUST TEE/CONDENSATE TRAP ASSEMBLY
1
11
9
7
2
3
8
10
3
4
5
6
Item Part No. Description Qty.
Kit# 550001465: 95M-200 Exhaust tee/condensate trap Replacement kit includes:
1 1400012 Pipe Vent 2” CPVC Pre-formed, with hole 1
2 14631101 Hose Adapter, ½” NPT x ½” ID 1
3 14631141 Clamp Snap Grip ¾” 2
4 14631035 Tubing Vinyl ½” ID x ⅛” 1.83 ft
5 240005852 Cleanout, 2” PVC 1
6 1400008 Pipe CPVC 2” x 3⅜” 1
7 14631103 Tube Elbow ½” NPT x ½” ID 1
8 1600004
9 14631306
10 14631322 Nipple ½” x 4” PVC SCH 80 1
11 14631020 Tee PVC ½” SL x ½” NPT 1
* 240005853 Strap, Cable, Push Mount 1
* Not Shown
Washer, Flat 2” OD x 13/16” ID
Coupling ½” NPT PVC SCH 80
1
1
5
Loading...