Transmitter
•
•
•
FUNCTION
(1) LED
Power ON/.OFF. While press the button • OR •, The light ON
(2) DATA CODING SWITCH( •and•)
• When press the button •or•; programmed Data automatically connected to the RECEIVER
• If supplied DATA Coincide with receiver, The RECEIVER start operation.
• When press the button one more time, The RECEIVER stop operation.
Receiver
•
•
•
(
• Green_wire : No.1 Switching
• Green_wire : No.1 Switching
• Blue_wire : No.2 Switching
• Blue_wire : No.2 Switching
• Red_wire : 6 ~ 8[V] DC Voltage
• Black_wire : Ground
• N.C : No Connection
• Tact_switc h : Whil e LED on, If pr ess t he switch No.1, then the LED
light off
also be added memory quantity.
• (Be able to add maximum 20pcs, If repeat No.8
action.)
Top view )
Caution : Any changes or modifications in
construction of this device which are not expressly
approved by the party responsible for compliance
could void us er's aut horit y to opera te the equ ipmen t.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUD I NG INT ERF E REN CE THAT MA Y CA USE UNDE S IRE D OPE RA TI ON.
BESTEC.CO
ADDRESS : 1594S. ANAHEIM BLVD.SUITE.C
ANAHEIM. CA 92805
TEL : 714)520-3030
FAX : 714)520)5653
NAME : LEE. JAY.Y
Loading...