User Manual
UTEMVE-105H
HEVC H.265 HDMI Streaming Encoder
All Rights Reserved
Version: UTEMVE-105H_2017V1.0
Distribution by
U.T.E. Electronic GmbH & Co. KG
Friedrich-Ebert-Str. 112a | 58454 Witten, Germany
+49 (0)2302 / 28 28 3-0 | www.ute.de
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
U.T.E. electronic GmbH & Co. KG
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
SAFETY PRECAUTIONS
• To prevent fire or shock hazard, do not expose this equipment to an environment of high humidity
and/or dust. Do not use in an unprotected outdoor installation or any area classified as overly damp
or wet.
• The temperature for installation should be kept between 0°C - 60°C. Avoid direct sunlight exposure
or extreme changes of temperature over a short period of time.
• Do not disassemble the unit or put it on an unstable base.
• Do not drop it and avoid heavy impact.
• Ventilation: Any openings in the enclosure are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating. These openings, if any, must not be blocked
or covered. This unit should not be placed in a built-in installation unless proper ventilation is
provided.
• Cleaning: Unplug the unit from the mains outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners, only use a damp cloth.
• Do not overload outlets and extension cords as this may result in a risk of fire or electric
shock.
• Enclosure Entry of any kind is dangerous. Never push objects of any kind, including liquids, into
this unit through openings as they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock.
• Service: Do not attempt to open or service this unit yourself as opening or removing covers may
expose you to dangerous voltage of other hazards.
• There are no user-serviceable parts inside the unit. If the unit requires service please contact your
authorized dealer, or an authorized repair service company.
U.T.E. electronic GmbH & Co. KG
UTE
-105H: HEVC H.265 IP Streaming Encoder
MVE
UTEMVE-105H - HEVC H.265 Video + Audio Encoder
The HEVC encoder UTEMVE-105H is a hardware device used for high-definition video signal (720P /
1080P, etc.) encoding and network transmission, using the latest and high-efficient high-definition
digital video compression technology H.265, with the characteristics of reliable, high-definition, low bit
rate and low latency.
The launch of this product, using a hardware DSP encoder, fills the gap in the industry, which is a
direct replacement for the traditional capture card or software coding method. Input the HDMI video
signal to conduct the encoding process, after compression processing of the DSP chip, output the
standard TS network stream.
The system is more stable and image quality is more perfect, which can be used in a wide variety of
needs for high-definition video and high-resolution and high frame rate acquisition-based IP network
transmission. Its powerful scalability makes it more easily to respond to the needs of different
industries and can be used as live video encoder too.
Industrial controlled and precision design, the small size, the power consumption is less than 5W,
offers an easy and energy efficient installation.
Includes
• 1 Encoder
• 1 Power Supplies, 12 V DC / 2 A
Features
• H.264\H.265 HDMI Encoding
• Equipped with 1 channel HDMI video input
• Dual channels encoder which can output TS dual stream with different signals
• Support settings of the bit rates and resolution for each channel as required
• Widely used in variety of digital distribution systems such as CATV digital head-end, satellite and
terrestrial digital TV etc.
• Be able to replace of HD capture card and support VLC decoding
U.T.E. electronic GmbH & Co. KG
1
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
The Encoder Hardware
The transport-stream hardware encoder UTEMVE-105H features;
• Support standard H.265\H.264 encoding
• Save bandwidth up to 33% when choose H.265 codec, i.e 1.5 MBps bandwidth will be workable to
transport 1080P video.
• Audio coding support MPEG1 Audio Layer2
• CBR/VBR/ABR code rate controlling, 16 kbit/s ~ 16 Mbit/s
• Support Network interface full-duplex mode 1000M
• Support HTTP, UTP, RTSP, RTMP, ONVIF, unicast and multicast
• Output stream format: TS/VES/AES
• The WEB operating interface, configuration interface in English and Chinese are optional
• Support web management
• Support resolution setting
• Support switching between mono and stereo audio
• Support decoding the set-top box
• Support transmit in LAN and WAN
Hardware I/Os
All I/Os are placed on one front for easy installation.
• Power input: 12 V DC input , using 12 V 1 A power supply
• Status indication: Lit if there is internet connection, off when there is no network. At reset, if the
light is not on after 10 seconds, the device is restarted.
• Power indication: Lit to indicate if the power is normal
• Reset button: it is used to reset the device, when turned on, press and hold for 10 seconds, the
device IP will back to factory IP, 192.168.1.168
• HDMI input: it is used for HDMI signal input (SDI model UTEMVE-105S available)
• Analog audio input: use to combine analog audio sources with HDMI signals
• Ethernet port: 10/1000M network port
U.T.E. electronic GmbH & Co. KG
2
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
Specifications
Video:
Video input HDMI-A 1.3 (HDCP conform)
1080p / 1080i / 720p
Resolution
Frame rate 60 Hz max.
Coding
Rate 0.8 ~ 12 Mbit/s
Rate control CBR / VBR
GOP type Adjustable
Video preprocessing de-interlacing noise reduction, sharpening
Latency <200 ms
1600x1200 / 1400x1050 / 1440x900 / 1280x1024 / 1280x960 /
1280x800 / 1024x768 / 800x600 etc.
H.265 Main Profile encoding
H.264 Main Profile encoding
H.264 Baseline Profile encoding
H.264 High Profile encoding
Audio:
Encoding format AAC, MP3
Input connector
Sampling rate self-adaption
Bit rate 32k, 44.1k, 48k, 64k, 96k, 128k, 160k, 192k
Sampling accuracy 24 bit
Code rate 64 ~ 320 kbit/s
Network:
Network port RJ45 Ethernet
Data rate <1000 Mbit/s
Head stream HTTP, UTP, RTSP, RTMP, ONVIF protocol
Data stream TS Standard Stream, Dual Code Stream
Configuration WEB based operation interface
Firmware Updatable through internet
Electrical & Mechanical:
Input Power Requirements: DC 12 V @ 1 A
Power Adapter: AC 90 V~240 V
Power Consumption: < 5 W
Dimensions: 165 mm × 85 mm × 24 mm
Weight: 300 g
Digital: HDMI embedded
Analog: 3,5 mm TRS
Environmental:
Operating Temperature: -20°C ~ +60°C
Storage Temperature: -20°C ~ +80°C
Relative Humidity: 0% ~ 95% (non-condensing)
MTBF: >100,000 hours
U.T.E. electronic GmbH & Co. KG
3
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
Operating System
The UTEMVE-105H can be controlled by the WEB GUI interface. Connect the encoder to a PC
using the Ethernet connection. To acces a standard WEB browser is best.
Log-In to the System
Standard Log-In
Change the administrator’s computer IP address (in case of WIN 7) as : 192.168.1.* to avoid IP
conflicting with dashboard IP. (mark “*” numbers range will be 0-254 except 168 )
Open the Log-In Dash Board in your web browser. Enter 192.168.1.168 in URL address, the Log-In
window appears. Type the user name and password.
Default Address
The System comes with default address and password.
Default address 192.168.1.168
Default User admin
Default Password admin
Reset & Initialization
Input the power supply to turn on encoder and press reset (RST) on the encoder's front constantly for
about 10 seconds. The system will be restarted and initialized. The default IP of the encoder is
192.168.1.168 after initialization.
U.T.E. electronic GmbH & Co. KG
4
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
System Menue
Using the WEB-GUI just after Log-In the System Menue appears.
It contains six sections of information or settings.
Status Display
The Status Display shows the current settings of the HEVC encoder system.
Input Status: Shows the video and audio format at the input HDMI
Mainstream Status: Shows the settings for the main stream
Secondstream Status: Shows the settings for the second stream
Mainstream Live View: Shows the live stream address for the mainstream
Secondstream Live View:Shows the live stream address for the secondstream
U.T.E. electronic GmbH & Co. KG
5
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
Network
In this section the network settings are accessible.
Ethernet: Select Ethernet as network
DHCP: Enables DHCP mode
IP: Shows the current IP address, here you can enter your individual IP
Netmask: Shows the current netmask, here you can enter your individual netmask
Gateway: Shows the current gateway, here you can enter your individual gateway
DNS: If you want to push stream by RTMP to media server, the DNS need be
same as your router’s .
MAC: The physical address of the device, after you reset it, it will change.
In case this is a WiFi version of UTEMVE-105H an additional window appears.
Wifi settings: You need buy the wifi version of the device if you need wifi connecting .
The device will be WIFI status after reboot when there is no network cable
connected.
U.T.E. electronic GmbH & Co. KG
6
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
Mainstream
In this section the mainstream settings are accessible.
Encoder type: Selector for the type of compression H.264 & H.265
Profile: Selector for baseline profile / main profile / high profile
Frame rate: Selector for frame rate 5 to 60 fps (when the input resolution is 1080i50, the
frame rate will choose 25)
Bitrate mode: Selector for VBR / CBR
Group of picture: Selector for 5 - 200 pictures
Output Size: When you select Auto, the input and output resolution is the same
Bitrate: Selector for bit rate 16 - 1200k (Network bandwidth setting)
HTTP protocol: main enable / Disable
HTTP port: selectable 1-65535
RTSP protocol: main enable / Disable
RTSP port: selectable 1-65535
Multicast IP: 232.255.42.42, can be modified to disable / RTP / UDP
Multicast port: selectable 1-65535
U.T.E. electronic GmbH & Co. KG
7
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
RTMP server address: Can be modified according to the streaming server IP or domain name
RTMP server port: selectable 1-65535
RTMP app name: Customized
RTMP user name: Customized
ONVIF: Enable / disable security monitoring with protocol
OnScreen Display
The UTEMVE-105H HEVC Encoder allows to insert individual watermarks or logos. Use the OSD
menu to arrange setting for position of the picture or text you want to put in the web-interface.
Two different Text inserts can be arranged.
Text X: Horizontal start point for text [1 - 1920]
Text Y: Vertical start point for text [1 - 1080]
Font size: Selectable font size 8 - 72 pt
Opacity: Selectable font opacity 0 - 128
Font color: Selector for font color
Background color: Selector for background color or transparancy
Text: Window to type the text
U.T.E. electronic GmbH & Co. KG
8
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
Image Quality Settings
Under normal circumstances it is not necessary to change the default settings for the image
processor. If you try to encode critical video material corrections for enhanced image quality can be
done in the Image Quality Settings menu.
Brightness: to modify the brightness of the image (0 to 100)
Contrast to modify the contrast of the image (0 to 100)
Hue: to modify the hue of the image (0 to 100)
Saturation: to modify the saturation of the image (0 to 100)
Secondstream
In this section the secondstream settings are accessible.
The settings are same like Mainstream.
U.T.E. electronic GmbH & Co. KG
9
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
Audio Settings
In this section the audio settings are accessible.
Audio bitrate: Selector for 48 / 64 / 96 / 128 / 160 /192 / 256 kbit/s
Audio type: Selector for AAC or MP3
Audio resample: Selector for disable / 32 kHz / 44.1 kHz
Audio Digital Gain: Selector for disable 2X / 4X / 8X (It's for adjusting the volume flow)
Audio input mode: Selector for Digital / Analog input (Please choose analog input when you
want to use the external analog audio input.)
U.T.E. electronic GmbH & Co. KG
10
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
System Settings
In this section the system settings are accessible.
Change password: Here you can change the default user name and password to your individual
user name and password. Click MODIFICATION to confirm.
System information : Shows device serials number and firmware version
Upgrade setting: Search for software upgrade package and UPLOAD
NOTE: CHOOSE THE COMPRESSED UPGRADE PACKAGE(*.RAR FILE) WITHOUT
DECOMPRESSING PACKAGES. DO NOT REFRESH THE PAGE AND OTHER OPERATIONS
DURING THE UPGRADE.
System Settings: To confirm your individual settings click REBOOT. The system will reboot
and start again using the latest settings.
U.T.E. electronic GmbH & Co. KG
11
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
VLC Operation
The UTEMVE-105H is compatible to be used with VLC open media player
software. Start the VLC application at your PC and open the Network Stream.
Enter the IP address of the encoder to play the stream video.
Click PLAY to start the video.
U.T.E. electronic GmbH & Co. KG
12
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
Frequently Asked Questions
Q: How to access to the encoder web-interface by default IP ?
A: The computer’s IP network segment need be same as the encoder’s default IP. ex: if the encoder’s
default IP is 192.168.1.168, then you need change your computer’s ip to 192.168.1.*( mark “*”
numbers range will be 0-30&30-254).
Q: H.265 will save bandwidth than H.264?
A: YES, H.265 will save nearly 33% bandwidth than H.264.
Q: What is the maximum resolution after encoded ?
A: Our encoder support a maximum resolution of 1080p, but it depends on your signal source , if your
signal source is 720p, then max encoded resolution is 720p.
Q: How to push stream to media server to do live broadcast by Ustream, Youtube or like that?
A: Because most server can not support H.265 for the moment, so if you want to push stream to
server, you need choose encoding level to H.264, and then set RTMP protocol. Put your server’s IP,
server’s port, app name and stream name to the web-interface after enable RTMP protocol. Please
kindly note that you need set the DNS same as your router’s by network setting.
Q: Does the encoder support push stream to WOWZA?
A: YES
U.T.E. electronic GmbH & Co. KG
13
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
Power Supply
The unit is powered by the 12 V DC 1 Amp universal voltage [100 V - 240 V AC 50/60 Hz input range]
AC power adapters, similar to the shown above power supply above.
Note:
The UTEMVE-105H features environmentally conscious packaging material to protect the
UTEMVE-105H system during transportation and can be used for temporary storage when better
forms of storage are not available.
U.T.E. electronic GmbH & Co. KG
14
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
U.T.E. electronic GmbH & Co. KG
UTEMVE-105H: HEVC H.265 IP Streaming Encoder
U.T.E. electronic GmbH & Co. KG
U.T.E. electronic GmbH & Co. KG
Tel: +49-2302-282830
Fax: +49-2302-28283-10
Email: info@ute.de
Website: www.ute.de
Loading...