U-tec Ultraloq UL3 Installation Instructions Manual
Ultraloq UL3
Fingerprint and Touchscreen
Smart Lock
Installation Instructions ( V1.3 )
Welcome
Important Notes
• Only use a power drill for making a hole.
Do not use it for installation.
• Install and test the lock with the door open to avoid being
locked out.
• Please read all the instructions before contacting customer
support.
• Please contact customer support before returning the
product to the store.
• DO NOT install the batteries before installing the lock! Follow
the instructions in sequential order!
• If you have previously installed this lock on another door, you
must perform a Factory Default Reset FIRST! See the User
Guide for more information.
• This lock is designed for the following operating tempera tures:
• Outside Lock Body (exterior mounted): -31˚F (-35˚C) to
158˚F (70˚C)
• Inside Lock Body (interior mounted): 14˚F (-10˚C) to 131˚F
(55˚C)
Please watch our easy step by step installation video
before attempting to install your Ultraloq UL3 Fingerprint
and Touchscreen Smart Lock.
If you have questions regarding the installation process
Please contact us at customerservice@u-tec.com
- 1 -
Installation Video
www.u-tec.com/support
Need Help?
For technical documents and more
Please visit www.u-tec.com/support
Tel: 844-HEY-UTEC (844-439-8832)
Email: customerservice@u-tec.com
Included in the box
Exterior
Assembly
LatchStrike
Screw A
Screw B
Screw C
Screw D Screw E
Backup Keys
Interior
Assembly
Interior
Mounting Plate
Spindle
Handle
Drill Screwdriver
AA alkaline
AA Batteries
- 2 -
Spring
Check the door’s dimensions
Drill a hole in the door
Use the Drill Template
provided in the box.
- 3 -
2
3
/
4
”
2
3
/
8
”
(70 mm)
(35 mm-44mm)
OR
(60 mm)
2
1
/
8
”(53 mm)
Hole
1” (25 mm)
Door Edge
Preparing Door
1
3
/
8
” 1
3
/
4
”
~
!
If your door thickness is over 16.5”(42mm),
Please install this spring.
- 4 -
Preparing Door
Interior
Spring ×1
!
Loading...