UTC M2100 LINEAR INTEGRATED CIRCUIT
SINGLE OPERATIONAL
AMPLIFIER
DESCRIPTION
The UTC M2100 is a low supply voltage and low
saturation output voltage (+-2.0V p-p at supply voltage
+-2.5V) operational amplifier. It is applicable to handy
type CD, radio cassette CD, and portable DAT, that
are digital audio apparatus which require the 5V single
supply operation and high output voltage.
FEATURES
*Single Supply Operation
*Operating Voltage (+-1.0V~+-3.5V)
*Low Saturation Output Voltage
*High Slew Rate (4V/ µs typ.)
*Package Outline
*Bipolar Technology
PIN CONFIGURATION
SOP-8
DIP-8
A OUTPUT
A -INPUT
A +INPUT
V-
1
A
- +
2
B
+ -
3
4
8
7
6
5
V+
B OUTPUT
B -INPUT
B +INPUT
UTC UNISONIC TECHNOLOGIES CO., LTD.
1
QW-R105-011,A
UTC M2100 LINEAR INTEGRATED CIRCUIT
BLOCK DIAGRAM
ABSOLUTE MAXIMUM RATINGS (Ta=25°C )
Supply Voltage V+/V- +-3.5 V
Differential Input Voltage VID +-7 V
Power Dissipation PD 500 (DIP8)
Operating Temperature Range Topr -20~+75
Storage Temperature Range Tstg -40~+125
PARAMETER SYMBOL VALUE UNIT
mW
250 (SOP8)
°C
°C
ELECTRICAL CHARACTERISTICS (Ta=25°C )
(V+=5V,Ta=25°C,unless otherwise specified)
Input Offset Voltage VIO
Input Bias Current IIB 100 300 nA
Large Signal Voltage Gain Av
Maximum Output Voltage Swing VOM
Input Common Mode Voltage Range VICM +-1.5 V
Common Mode Rejection Ratio CMR 60 74 dB
Supply Voltage Rejection Ratio SVR 60 80 dB
Operating Current Icc
Slew Rate SR Av=1,VIN=+-1V 4
Gain-Bandwidth product GB f=10kHz 12 MHz
NOTE1: Applied circuit voltage gain is desired to be operated within the range of 3 dB to 30dB.
NOTE2: Special care being required for input common mode voltage range and the oscillation due to the capacitive
NOTE3: Special care being required for the oscillation, yet having the gain when the supply voltage is applied at
PARAMETER SYMBOL TEST CONDITIONS MIN TYP. MAX UNIT
load when operating on voltage follower.
more than 5V (single supply voltage 5V)
Rs<=10kΩ
RL>=10kΩ
RL>=2.5kΩ
VIN=0,RL=∞
60 80 dB
+-2 +-2.2 V
1 6 mV
3.5 5 mA
V/µS
UTC UNISONIC TECHNOLOGIES CO., LTD.
QW-R105-011,A
2