U.S. Stamp & Sign B1600314, B1600248, B1600323, B1600327, B1600264 User Manual

Date printed 10.11.2014, Revision 10.11.2014

Version 01

Page 1 / 7

Trodat GmbH

Safety Data Sheet (SDS) conforms to ANSI Z400.1/Z129.1-2010 (29 CFR 1910) (US)

7011 Trodat Ideal Black

4600 Wels

SECTION 1: Identification of the substance/mixture and of the company/undertaking

Product identifier

7011 Trodat Ideal Black

Relevant identified uses of the substance
or mixture and uses advised against

Paint

Identified use

none

Company

Trodat GmbH
Linzerstr. 156
4600 Wels / AUSTRIA
Phone [phone] - 0
Fax [phone] - 940
Homepage www.trodat.net
E-mail [e-mail]

Address enquiries to

Emergency telephone number Advisory
body

[phone] (24h)

Emergency telephone number Company

[phone] - 0 Mo-Fr 8:00 - 16:00

Technical information

[e-mail]

Safety Data Sheet

[e-mail]

SECTION 2: Hazards identification

Emergency Overview

Appearance, Odor:

liquid, black, characteristic

OSHA Regulatory Status

This product is classified as non-hazardous in accordance to OSHA Standard 29 CFR

1910.1200.

Potential health effects

Potential environmental effects

Does not contain any PBT or vPvB substances.

SECTION 3: Composition / Information on ingredients

The product is a mixture.

Range [%]

Substance

30 - < 50

CAS: 56-81-5

Glycerol

5 - < 10

CAS: 8005-03-6

Acid Black 2

1 - < 5

CAS: 1333-86-4

Carbon Black

< 1

CAS: 7757-82-6

Sodium sulphate

< 1

CAS: 25322-68-3

Polyethylene glycol

< 0,1

CAS: 62-53-3

Aniline

Comment on component parts

Substances of Very High Concern - SVHC: substances are not contained or are below 0,1%.
For full text of H-statements and R-phrases: see SECTION 16.

www.chemiebuero.de, Phone [phone], [e-mail], 140812a

trk00061 US

Date printed 10.11.2014, Revision 10.11.2014

Version 01

Page 2 / 7

Trodat GmbH

Safety Data Sheet (SDS) conforms to ANSI Z400.1/Z129.1-2010 (29 CFR 1910) (US)

7011 Trodat Ideal Black

4600 Wels

SECTION 4: First aid measures

Description of first aid measures

Take off contaminated clothing and wash before reuse.

Inhalation

Ensure supply of fresh air.
In the event of symptoms seek for medical treatment.

Skin contact

When in contact with the skin, clean with soap and water.
Consult a doctor if skin irritation persists.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.

Ingestion

Seek medical advice immediately.
Rinse out mouth and give plenty of water to drink.
Do not induce vomiting.

Indication of any immediate medical
attention and special treatment needed

Treat symptomatically.

SECTION 5: Fire-fighting measures

Suitable extinguishing media

Extinguish blanket.
Carbon dioxide.
Foam.

Extinguishing media that must not be used

Full water jet.

Special exposure hazards arising from the
substance or preparation itself or
combustion products

Risk of formation of toxic pyrolysis products.
Carbon monoxide (CO)

Special protective equipment for
firefighters

Use self-contained breathing apparatus.

Additional information

Fire residues and contaminated firefighting water must be disposed of in accordance within
the local regulations.

SECTION 6: Accidental release measures

Personal precautions, protective
equipment and emergency procedures

High risk of slipping due to leakage/spillage of product.
Ensure adequate ventilation.
Keep away from all sources of ignition.

Environmental precautions

Prevent spread over a wide area (e.g. by containment or oil barriers).
Do not discharge into the drains/surface waters/groundwater.

Methods and material for containment and
cleaning up

Pick up with absorbent material (e.g. sand, sawdust, universal absorbent, diatomaceous
earth).
Dispose of absorbed material in accordance within the regulations.

SECTION 7: Handling and storage

Precautions for safe handling

Use only in well-ventilated areas.

Requirements for storage rooms and
vessels

Keep only in original container.
Prevent penetration into the ground.
Provide floor with bunding.

Advice on storage compatibility

Do not store together with oxidizing agents.

Further information on storage conditions

Keep container in a well-ventilated place.
Keep container tightly closed.
Protect from heat/overheating.

www.chemiebuero.de, Phone [phone], [e-mail], 140812a

trk00061 US

Date printed 10.11.2014, Revision 10.11.2014

Version 01

Page 3 / 7

Trodat GmbH

Safety Data Sheet (SDS) conforms to ANSI Z400.1/Z129.1-2010 (29 CFR 1910) (US)

7011 Trodat Ideal Black

4600 Wels

SECTION 8: Exposure controls / personal protection

Additional advice on system design

Ensure adequate ventilation on workstation.

Ingredients with occupational exposure
limits to be monitored (US)

Range [%]

Substance

35 - < 50

Glycerol

CAS: 56-81-5, EINECS/ELINCS: 200-289-5

Long-term exposure: 15 mg/m³, (mist) total dust

1 - < 3

Carbon Black

CAS: 1333-86-4, EINECS/ELINCS: 215-609-9

Long-term exposure: 3,5 mg/m³, OSHA

< 0,1

Aniline

CAS: 62-53-3, EINECS/ELINCS: 200-539-3, EU-INDEX: 612-008-00-7

Long-term exposure: 2 ppm, 7,6 mg/m³, ACGIH

Respiratory protection

Breathing apparatus in the event of high concentrations.
Short term: filter apparatus, combination filter A-P2.

Hand protection

Butyl rubber, >480 min (EN 374).
The details concerned are recommendations. Please contact the glove supplier for further
information.

Eye protection

If there is a risk of splashing:
Safety glasses.

Skin protection

light protective clothing

General protective measures

Avoid contact with eyes and skin.
Personal protective equipment should be selected specifically for the working place,
depending on concentration and quantity of the hazardous substances handled. The
resistance of these equipments to chemicals should be ascertained with the respective
supplier.

Hygiene measures

Take off contaminated clothing and wash before reuse.
Do not eat, drink or smoke when using this product.
Wash face and/or hands before break and end of work.
Use barrier skin cream.

Delimitation and monitoring of the
environmental exposition

Comply with applicable environmental regulations limiting discharge to air, water and soil.

SECTION 9: Physical and chemical properties

Form

liquid

Color

black

Odor

characteristic

pH-value

not determined

pH-value [1%]

not determined

Boiling point [°C]

not determined

Flash point [°C]

> 146

Flammability [°C]

ca. 225

Lower explosion limit

not applicable

Upper explosion limit

not applicable

Oxidizing properties

no

Vapour pressure/gas pressure [kPa]

ca. 0,01 (20 °C)

Density [g/ml]

not determined

Bulk density [kg/m³]

not applicable

Solubility in water

completely miscible

Partition coefficient [n-octanol/water]

not determined

Viscosity

not determined

Relative vapour density determined in air

not determined

Evaporation speed

not determined

Melting point [°C]

not determined

Autoignition temperature [°C]

not determined

Decomposition temperature [°C]

not determined

www.chemiebuero.de, Phone [phone], [e-mail], 140812a

trk00061 US