Page 1
IR REMOTE CONTROL SYSTEM
User’s Manual
Please read this instruction thoroughly before operation
and retain itfor future reference.
USER’S MANUAL
601 V1.2
IR REMOTE CONTROL SYSTEM
User’s Manual
Please read this instruction thoroughly before operation
and retain itfor future reference.
USER’S MANUAL
601 V1.2
Page 2
Thank-You Note Before You Get Start
First of all, we would like to express our gratitude to you for purchasing CPcam
products. Once again, this product is designed uniquely to meet all your personal needs
with our great industry-designing ability and our everlasting perseverance to the quality
of all our products.
This manual will introduce you how to install this camera. Please keep it well for your
future reference.
Now, we would like to invite you to personally experience this user-friendly manual and
all of the powerful functions this CPcam product offers.
http://www.cpcamcctv.com
Thank-You Note Before You Get Start
First of all, we would like to express our gratitude to you for purchasing CPcam
products. Once again, this product is designed uniquely to meet all your personal needs
with our great industry-designing ability and our everlasting perseverance to the quality
of all our products.
This manual will introduce you how to install this camera. Please keep it well for your
future reference.
Now, we would like to invite you to personally experience this user-friendly manual and
all of the powerful functions this CPcam product offers.
http://www.cpcamcctv.com
Page 3
WARNING
WARNING
All the safety and operating instructions should be read before operation. The improper operation may cause permanent damage.
• Please lift and place this equipment gently.
• Do not expose this equipment to open sunlight.
• Do not use this equipment near water or in contact with water.
• Do not spill liquid of any kind on the equipment.
• Do not attempt to have this equipment serviced by yourself.
• Installation should be made by qualified service personnel.
** The operating humidity is between 0%~80%.
The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the
presence of uninsulated"dangerous voltage" within the product's enclosure that may beof sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intendedto alert the user to the presence of important
operating and maintenance-(servicing) instructions in the literature accompanying the appliance.
WARNING
WARNING
All the safety and operating instructions should be read before operation. The improper operation may cause permanent damage.
• Please lift and place this equipment gently.
• Do not expose this equipment to open sunlight.
• Do not use this equipment near water or in contact with water.
• Do not spill liquid of any kind on the equipment.
• Do not attempt to have this equipment serviced by yourself.
• Installation should be made by qualified service personnel.
** The operating humidity is between 0%~80%.
The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the
presence of uninsulated"dangerous voltage" within the product's enclosure that may beof sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intendedto alert the user to the presence of important
operating and maintenance-(servicing) instructions in the literature accompanying the appliance.
Page 4
SPECIFICATIONS
ª
SPECIFICATIONS
SPECIFICATIONS
1.Support PTZ camera & DVR control
2.Connected to RS-485 by transmission line
3.IR Receiver
4.Control up to 255 PTZ & LIGHT
5.Control up to 255 DVR
6.Enabling different ID
7.Current Consumption: DC 12V, 25mA
ª
SPECIFICATIONS
SPECIFICATIONS
1.IR control for PTZ camera, DVR, LIGHT
2.IR emission distance:straight-line is 10m; transmit at left and right 22.5
degree is 8m
3.Control up to 255 PTZ camera & LIGHT
4.Control up to 255 DVR
5.Enabling different ID
6.Current Consumption: AAA Size battery x 2
7.Not support digital zoom.
ª
SPECIFICATIONS
SPECIFICATIONS
1. Home Electronics (lights, TV,etc.)
2. Connected to RS-485 by transmission line
3. DC IN x 1, DC OUT x 1
4. Output Terminal
5. Current Consumption: 50mA
IR RECEIVER
IR RECEIVER
IR TRANSMITTER
IR TRANSMITTER
REMOTE SWITCH
REMOTE SWITCH
SPECIFICATIONS
ª
SPECIFICATIONS
SPECIFICATIONS
1.Support PTZ camera & DVR control
2.Connected to RS-485 by transmission line
3.IR Receiver
4.Control up to 255 PTZ & LIGHT
5.Control up to 255 DVR
6.Enabling different ID
7.Current Consumption: DC 12V, 25mA
ª
SPECIFICATIONS
SPECIFICATIONS
1.IR control for PTZ camera, DVR, LIGHT
2.IR emission distance:straight-line is 10m; transmit at left and right 22.5
degree is 8m
3.Control up to 255 PTZ camera & LIGHT
4.Control up to 255 DVR
5.Enabling different ID
6.Current Consumption: AAA Size battery x 2
7.Not support digital zoom.
1
IR RECEIVER
IR RECEIVER
IR TRANSMITTER
IR TRANSMITTER
ª
SPECIFICATIONS
SPECIFICATIONS
1. Home Electronics (lights, TV,etc.)
2. Connected to RS-485 by transmission line
3. DC IN x 1, DC OUT x 1
4. Output Terminal
5. Current Consumption: 50mA
REMOTE SWITCH
REMOTE SWITCH
1
Page 5
SITUATION SIMULATE
PTZ CAMERA
: connect
: transmit
SITUATION SIMULATE
REMOTE
SWITCH
DVR
IR RECEIVER
IR TRANSMITTER
2
: connect
: transmit
REMOTE
SWITCH
PTZ CAMERA
DVR
IR RECEIVER
IR TRANSMITTER
2
Page 6
RS 485
3
RS 485
RS485-B
(green color line)
Note:
Connect “RS485-A(red color line)” to 11thaperture on DVR’s Sub-D Plug, PTZ or Remote Switch.
Connect “RS485-B(green color line)” to 10thaperture on DVR’s Sub-D Plug, PTZ or Remote Switch.
RS485-A
(red color line)
3
Note:
Connect “RS485-A(red color line)” to 11thaperture on DVR’s Sub-D Plug, PTZ or Remote Switch.
Connect “RS485-B(green color line)” to 10thaperture on DVR’s Sub-D Plug, PTZ or Remote Switch.
RS485-B
(green color line)
RS485-A
(red color line)
Page 7
PANEL DESCRIPTION
Preset
CAMERA
Zoom max
Zoom min
Zoom +
Zoom -
UP
Auto Menu
Left
Digital Zoom
Down
Light
DVR
Number selection
buttons
Right
ENTER
ID
1.BLUE LINE AREA – Control CAMERA
2.RED LINE AREA – Control DVR
3.OTHERS – Support CAMERA & DVR
4.Digital Zoom is not supported now.
PANEL DESCRIPTION
PIP/+
QUAD/-
Pause
Stop
Menu
Search
Preset
CAMERA
Zoom max
Zoom min
Zoom +
Channel selection buttons
Zoom
Rec
F.F.
REW
Play
4
Light
DVR
Number selection
buttons
1.BLUE LINE AREA – Control CAMERA
2.RED LINE AREA – Control DVR
3.OTHERS – Support CAMERA & DVR
4.Digital Zoom is not supported now.
Zoom -
UP
Auto Menu
Left
Digital Zoom
Down
PIP/+
QUAD/-
Pause
Stop
Menu
Search
4
Right
ENTER
ID
Channel selection buttons
Zoom
Rec
F.F.
REW
Play
Page 8
FUNCTIONDEFINITION -CAMERA
•Zoom max
Press the Zoom max button, the picture will become the biggest size directly.
•Zoom min
Press the Zoom min button , the picture will become the smallest size directly.
•Zoom + / –
Press the Zoom + or Zoom- button to change the ratio.
•Auto
Please refer to PTZ User’s Manual.
•Menu
Press Menu to enter Camera setting menu.
•Preset
Please refer to PTZ User’s Manual.
•Light
Press Light button to control remote switch (ON/OFF).
•UP, DOWN, L, and R
Press UP,DOWN,L and R to control PTZ camera.
If you press over 2 seconds, PTZ camera will move continuously.
5
FUNCTIONDEFINITION -CAMERA
•Zoom max
Press the Zoom max button, the picture will become the biggest size directly.
•Zoom min
Press the Zoom min button , the picture will become the smallest size directly.
•Zoom + / –
Press the Zoom + or Zoom- button to change the ratio.
•Auto
Please refer to PTZ User’s Manual.
•Menu
Press Menu to enter Camera setting menu.
•Preset
Please refer to PTZ User’s Manual.
•Light
Press Light button to control remote switch (ON/OFF).
•UP, DOWN, L, and R
Press UP,DOWN,L and R to control PTZ camera.
If you press over 2 seconds, PTZ camera will move continuously.
5
Page 9
FUNCTIONDEFINITION -DVR
•CH1、CH2、CH3、CH4
Press Ch1-4to select channel.
• / -
Under DVR play mode, it can display the 4 channels in QUAD mode.Under setup mode, it can decrease value.
• / +
Under DVR play mode, it can display Picture in Picture screen.Under setup mode, it can increase value.
•Zoom
Press Zoom button to enlarge the digital picture.
•Rec
Press Rec to start recording.
•;
Under DVR play mode, it can pause the video.
•¢
Under DVR playback mode, it can stop the action.
•uu
FF: Play video fast forward.
•tt
REW: Play video fast backward.
•Menu
Press Menu button to enter DVR setting menu.
•Search
Press Search button to search.
•u
Play: Press Play to see previous recorded video.
6
FUNCTIONDEFINITION -DVR
•CH1、CH2、CH3、CH4
Press Ch1-4to select channel.
• / -
Under DVR play mode, it can display the 4 channels in QUAD mode.Under setup mode, it can decrease value.
• / +
Under DVR play mode, it can display Picture in Picture screen.Under setup mode, it can increase value.
•Zoom
Press Zoom button to enlarge the digital picture.
•Rec
Press Rec to start recording.
•;
Under DVR play mode, it can pause the video.
•¢
Under DVR playback mode, it can stop the action.
•uu
FF: Play video fast forward.
•tt
REW: Play video fast backward.
•Menu
Press Menu button to enter DVR setting menu.
•Search
Press Search button to search.
•u
Play: Press Play to see previous recorded video.
6
Page 10
ADJUSTMENT AND SETTINGS
Turning On the Power of IR TRANSMITTER
• Press DVR, CAMERA and Digital Zoom button one by one to turn on IR Transmitter.
• IR Transmitter will turn off automatically after 8 minutes if there is no operation.
Please restart again.
• If IR Receiver receives IR signal, the indicator of IR Receiverwill flash.
Step 1
Step 1
Step 1
1.Press “DVR” button.
Step 2
Step 2
Step 2
2.Press “CAMERA” button.
Step 3
Step 3
Step 3
3.Press “Digital Zoom” button.
ADJUSTMENT AND SETTINGS
Turning On the Power of IR TRANSMITTER
• Press DVR, CAMERA and Digital Zoom button one by one to turn on IR Transmitter.
• IR Transmitter will turn off automatically after 8 minutes if there is no operation.
Please restart again.
• If IR Receiver receives IR signal, the indicator of IR Receiverwill flash.
Step 1
Step 1
Step 1
1.Press “DVR” button.
7
Step 2
Step 2
Step 2
2.Press “CAMERA” button.
Step 3
Step 3
Step 3
3.Press “Digital Zoom” button.
7
Page 11
ADJUSTMENT AND SETTINGS
vID Setting – CAMERA
For example: Changing Camera ID from 001 to 003
Step 1
Step 1
Step 1
1.Press “CAMERA” button.
Step 5
Step 5
Step 5
5.Press “ENTER” button.
Step 2
Step 2
Step 2
2. Press”0”“0”“1”.
*Note :
1.If CAMERA ID is 8, please press “0”、 “0”、”8” and “ENTER”.
2.If CAMERA ID is 68, please press “0”、 “6”、”8” and “ENTER”.
3.If CAMERA ID is 168, please press “1”、 “6”、”8” and “ENTER”.
4.If CAMERA ID is 100（or 200）, please press “+100” button(or “+200”) and “ENTER”.
5.The ID range is from 0 to 254.
If the setting is OK à when you press the “ID” button, the screen will show “CAMERA ID” at the
same time.
If you forget the ID(IR Receiver and Remote Switch)
àyou can press any three digits instead of Step2 and set the ID as default value ”000”.
8
Step 3
Step 3
Step 3
3. Press “ID” button.
Forget the ID
Forget the ID
Step 4
Step 4
Step 4
4. Press”0”“0”“3”.
ADJUSTMENT AND SETTINGS
vID Setting – CAMERA
For example: Changing Camera ID from 001 to 003
Step 2
Step 1
Step 1
Step 1
1.Press “CAMERA” button.
Step 5
Step 5
Step 5
5.Press “ENTER” button.
*Note :
1.If CAMERA ID is 8, please press “0”、 “0”、”8” and “ENTER”.
2.If CAMERA ID is 68, please press “0”、 “6”、”8” and “ENTER”.
3.If CAMERA ID is 168, please press “1”、 “6”、”8” and “ENTER”.
4.If CAMERA ID is 100（or 200）, please press “+100” button(or “+200”) and “ENTER”.
5.The ID range is from 0 to 254.
If the setting is OK à when you press the “ID” button, the screen will show “CAMERA ID” at the
same time.
If you forget the ID(IR Receiver and Remote Switch)
àyou can press any three digits instead of Step2 and set the ID as default value ”000”.
Step 2
Step 2
2. Press”0”“0”“1”.
Step 3
Step 3
Step 3
3. Press “ID” button.
Forget the ID
Forget the ID
Step 4
Step 4
Step 4
4. Press”0”“0”“3”.
8
Page 12
ADJUSTMENT AND SETTINGS
vID Setting – DVR
Use DVR panel to set DVR ID.
Step 1
Step 1
Step 1
1.Enter the main menu of DVR
and choose “SYSTEM”.
MENU
RECORD
CAMERA
DETECTION
DISPLAY
USER
SYSTEM
SYSTEM
EVENT
2. Enter “REMOTE” setup.
SYSTEM
KEY MUTE ON
BUZZER SETUP
MESSAE LATCH OFF
DATE DISPLAY D/M/F
DATE 1 JAN 2005
TIME 01:38:28
HDD FORAMT NO
SYSTEM RESET NO
LANGUAGE ENGLISH
UPGRADE SETUP
REMOTE SETUP
REMOTE SETUP
Step 2
Step 2
Step 2
Step 3
Step 3
Step 3
3. Set the REMOTE MODE as
RS-485, BAUD RATE as
2400 and DVR ID is on the
list.
REMOTE
REMOTE MODE RS-485
BAUD RATE 2400
ID 001
•If your command to the DVR won't be recognized by the receiver, you can set DVR’s ID as default value 000.
•If the Remote Mode is RS-485, then you can’t control PTZ via DVR’s panel*.
(*When you connect IR Receiver, PTZ and DVR, then the RS-485 will just be recognized between
IR Receiver and DVR)
9
ADJUSTMENT AND SETTINGS
vID Setting – DVR
Use DVR panel to set DVR ID.
Step 1
Step 1
Step 1
1.Enter the main menu of DVR
and choose “SYSTEM”.
MENU
RECORD
CAMERA
DETECTION
DISPLAY
USER
SYSTEM
SYSTEM
EVENT
•If your command to the DVR won't be recognized by the receiver, you can set DVR’s ID as default value 000.
•If the Remote Mode is RS-485, then you can’t control PTZ via DVR’s panel*.
(*When you connect IR Receiver, PTZ and DVR, then the RS-485 will just be recognized between
IR Receiver and DVR)
Step 2
Step 2
Step 2
2. Enter “REMOTE” setup.
SYSTEM
KEY MUTE ON
BUZZER SETUP
MESSAE LATCH OFF
DATE DISPLAY D/M/F
DATE 1 JAN 2005
TIME 01:38:28
HDD FORAMT NO
SYSTEM RESET NO
LANGUAGE ENGLISH
UPGRADE SETUP
REMOTE SETUP
REMOTE SETUP
Step 3
Step 3
Step 3
3. Set the REMOTE MODE as
RS-485, BAUD RATE as
2400 and DVR ID is on the
list.
REMOTE
REMOTE MODE RS-485
BAUD RATE 2400
ID 001
9
Page 13
ADJUSTMENT AND SETTINGS
vFunction : How to enter the main menu
Step 2
Step 1
Step 1
Step 1
Step 2
Step 2
Step 3
Step 3
Step 3
1.Press “CAMERA” button
or “DVR” button.
.
Step 4
Step 4
Step 4
4. Press “ENTER” button.
2.Press the ID number
3.Press “Menu” button and Menu list will be on the screen.
(0-254) .
.
Menu
( for DVR)
Menu
( for CAMERA)
*Note :
1.If ID number is 8, please press “0”、 “0”、”8”.
2.If ID number is 68, please press “0”、 “6”、”8”.
3.If ID number is 168, please press “1”、 “6”、”8”.
4.If ID number is 100（or 200）, please press “+100” button(or “+200”).
10
ADJUSTMENT AND SETTINGS
vFunction : How to enter the main menu
Step 2
Step 1
Step 1
Step 1
1.Press “CAMERA” button
or “DVR” button.
.
Step 4
Step 4
Step 4
4. Press “ENTER” button.
2.Press the ID number
(0-254) .
.
*Note :
1.If ID number is 8, please press “0”、 “0”、”8”.
2.If ID number is 68, please press “0”、 “6”、”8”.
3.If ID number is 168, please press “1”、 “6”、”8”
4.If ID number is 100（or 200）, please press “+100” button(or “+200”).
Step 2
Step 2
Step 3
Step 3
Step 3
3.Press “Menu” button and Menu list will be on the screen.
Menu
( for DVR)
Menu
( for CAMERA)
10
Page 14
ADJUSTMENT AND SETTINGS
vPreset
For example: In PTZ mode, if you want to see the 6thpreset position.
Step 2
Step 1
Step 1
Step 1
1.Press “Preset” button.
2. Press “0”、“0” 、“6”
and it will move to the 6
position.
Step 2
Step 2
vAuto
In PTZ mode,press “Auto” button and PTZ
will enter the Auto Mode.
Press any key can stop the Auto Mode.
Step 1
Step 1
Step 1
th
Press “Auto” button.
ADJUSTMENT AND SETTINGS
vPreset
For example: In PTZ mode, if you want to see the 6thpreset position.
Step 2
Step 1
Step 1
Step 1
1.Press “Preset” button.
2. Press “0”、“0” 、“6”
and it will move to the 6
position.
Step 2
Step 2
11
vAuto
In PTZ mode,press “Auto” button and PTZ
will enter the Auto Mode.
Press any key can stop the Auto Mode.
Step 1
Step 1
Step 1
th
Press “Auto” button.
11
Page 15
REMOTESWITCH
vID Setting:
DC POWER INPUT
DC POWER INPUT
The ID setting is the same as the CAMERA ID.
SET UP
(ON/OFF
Switch)
DC OUTPUT
RWARNING
If the input voltage is too high, the product
longevity would be affected. And it might also
cause the product to break down.
RJ-11
DC INPUT
DC
SOURCE
To DC Power Source
AC POWER INPUT
AC POWER INPUT
AC PLUG
To AC Power Source
12
+
-
DC LAMP
DC BUZZER
+
REMOTE
SWITCH
N
AC LAMP
L
L
REMOTE
SWITCH
AC BUZZER
REMOTESWITCH
vID Setting:
The ID setting is the same as the CAMERA ID.
SET UP
(ON/OFF
Switch)
DC OUTPUT
RWARNING
If the input voltage is too high, the product
longevity would be affected. And it might also
cause the product to break down.
RJ-11
DC INPUT
DC POWER INPUT
DC POWER INPUT
DC
SOURCE
To DC Power Source
AC POWER INPUT
AC POWER INPUT
AC PLUG
To AC Power Source
-
+
N
L
+
REMOTE
SWITCH
L
REMOTE
SWITCH
DC LAMP
DC BUZZER
AC LAMP
AC BUZZER
12
Loading...