US ROBOTICS USB 3.0 PCI-E CARD User Manual
USB 3.0 PCI-E
Card
User Guide
Guide de l'utilisateur
Bedienungsanleitung
Guía del usuario
rev 1 7/10
Contents
English . . . . . . . . . . . . . . . . . . . . . . . 1
Introduction...........................................1
Installation ............................................ 1
Specifications ........................................4
Regulatory .............................................5
Regulatory .............................................5
Français . . . . . . . . . . . . . . . . . . . . . . 6
Introduction...........................................6
Installation ............................................6
Caractéristiques techniques .....................9
Réglementation .................................... 10
Réglementation .................................... 10
Deutsch . . . . . . . . . . . . . . . . . . . . . 11
Einführung ........................................... 11
Installation .......................................... 11
Technische Daten ................................. 14
Vorschriften ......................................... 15
Vorschriften ......................................... 15
Español . . . . . . . . . . . . . . . . . . . . . 16
Introducción ........................................ 16
Instalación .......................................... 16
Datos técnicos ..................................... 19
Información normativa .......................... 20
Información normativa .......................... 20
English
English
Introduction
The USB 3.0 PCI-E Card is compliant with USB 3.0 specifications.
The hub lets your connect USB 3.0 devices to your computer, such
as an MP3 players, digital cameras, external USB drives, or USB
printers.
Features
y
Add 2 ports to USB 3.0 devices.
y Install easily into any PCI Express slot.
y Supports USB 3.0 transfer rate.
y Plug and play.
y ATX Power.
Package Contents
y
USB 3.0 PCI Express Card
y CD-ROM
y Quick Installation Guide
System Requirements
y
An available PCI express slot
Installation
1. Unplug all peripherals and power cords connected to your computer.
2. Shut down your computer.
1
English
3. Remove the cover from the computer case.
4. Locate an available PCI Express slot
and remove the bracket cover.
5. Insert the card into the open PCI
Express slot and fasten the bracket to
the case.
6. Connect 4P power cable from the
computer's power supply to the card.
7. Place the cover back onto the computer.
8. Plug your computer in and turn it on.
9. Insert the provided CD into your disc drive. Double-click the
setup.exe file in the Driver folder to launch the installation pro-
gram.
10. Accept the End User License Agreement and click Next.
11. Click Browse to choose the Destination Folder, then click
Next.
12. Click Install.
13. Click Finish to complete the setup process.
Verification
After finishing driver installation, the system will detect the USB 3.0
PCI-E Card. You can go to Device Manager on your computer to
verify the entire installation.
2
English
Windows XP
Windows Vista/ Windows 7
This product is subject to the U.S. Robotics Corporation Limited Warranty. To view a copy of the Limited Warranty and for
information on how to contact U.S. ROBOTICS Technical Support,
please see the U.S. ROBOTICS corporate web site at:
www.usr.com/support
3
English
Specifications
y Compliant with Universal Serial Bus 3.0 Specification Revision
1.0.
y Supports the following speed data rates:
Low-speed (1.5 Mbps)
Full-speed (12 Mbps)
High-speed (480 Mbps)
Super-speed (5 Gbps)
y Supports 2 downstream ports for all levels of speed.
y Supports all USB compliant data transfer types:
Control
Bulk
Interrupt
Isochronous transfer
y Compliant with PCI Express Base Specification 2.0.
y Supports PCI Express Card Electromechanical Specification
Revision 2.0.
y Supports PCI Bus Power Management Interface Specification
Revision 1.2.
y Supports power each port up to 900 mA.
Regulatory
FCC Conditions
This equipment has been tested and found to comply with Part 15 of
the FCC Rules. Operation is subject to the following two conditions:
4
English
(1) This device may not cause harmful interference
(2) This device must accept any interference received. Including
interference that may cause undesired operation.
CE
This equipment is in compliance with the requirements of the following regulations: EN 55 022: CLASS B
WEEE Information
For EU (European Union) member users: According to the WEEE
(Waste electrical and electronic equipment) Directive, do not dispose
of this product as household waste or commercial waste. Waste electrical and electronic equipment should be appropriately collected and
recycled as required by practices established for your country. For
information on recycling of this product, please contact your local
authorities, your household waste disposal service or the shop where
you purchased the product.
5
Loading...