U.S. Products DRIMASTER 3 UPHOLSTERY TOOL User Manual

DriMaster III HiFlo Upholstery

Tool Owner’s Manual

Model 000-163-220

HydraMaster / U.S Products

11015 47th Avenue West

Mukilteo, Washington 98275

MAN-45985 Rev. 0, January 31, 2014

No part of this manual may be reproduced or used in any form or by any means (i.e. graphic, electronic, photocopying or electronic

retrieval systems) without the express written permission of HydraMaster / U.S. Products Specications and information in this

document are subject to change without prior notice.

(000-182-102)

All rights reserved. © 2014 HydraMaster /

U.S. Products

This page intentionally left blank.

Table of Contents

GENERAL INFORMATION ........................................................................... SECTION 1

Contact Information ................................................................................. 1-2

Warnings, Cautions and Notices ............................................................. 1-3

OPERATING INSTRUCTIONS ..................................................................... SECTION 2

Optional Accessory Handle Assembly (P/N 000-061-144) ...................... 2-2

Begin Cleaning ........................................................................................ 2-3

TOOL MAINTENANCE ................................................................................. SECTION 3

Cleaning Bar Jet Assembly ..................................................................... 3-1

Cleaning the Filter Cartridge and Orice Plate........................................ 3-2

ASSEMBLIES AND PARTS LISTS ............................................................... SECTION 4

HiFlo Handpiece Assembly Parts List ..................................................... 4-4

Knob Assembly Parts List ....................................................................... 4-5

Bar Jet Assembly Parts List .................................................................... 4-7

Handle Accessory Assembly Parts List ................................................... 4-8

HOW TO ORDER PARTS ............................................................................ SECTION 5

Warranty Parts Orders ............................................................................ 5-1

Parts Orders ............................................................................................ 5-1

Emergencies ........................................................................................... 5-1

WARRANTY INFORMATION ....................................................................... SECTION 6

i - DriMaster HiFlo Upholstery Tool Owner’s Manual

This page intentionally left blank.

DriMaster HiFlo Upholstery Tool Owner’s Manual - ii

List of Figures

Figure 1-1. DM III Shown with Hide-A-Hose Attached.................................................1-1

Figure 2-1. Attach Optional Accessory Handle to the DM III .......................................2-2

Figure 2-2. Attach Solution Hose and Adjust Solution Control Knob ........................... 2-3

Figure 2-3. Turning Knob to “HiFlo” Position Forms

Sheet of Solution Across Bar Jet ..............................................................2-4

Figure 3-1. Clean Bar Jet Assembly with Feeler Gauge..............................................3-1

Figure 3-3. Remove Filter Cartridge and Orice Plate ................................................3-2

Figure 3-2. Disassemble Quick Connect ..................................................................... 3-2

Figure 3-4. Remove Four 4-40 Screws (Circled) from Nose of Tool ............................3-4

Figure 3-5. Re-install Nose .......................................................................................... 3-4

Figure 4-1. Adhesive/Sealant Material Reference .......................................................4-2

Figure 4-2. HiFlo Handpiece Assembly .......................................................................4-3

Figure 4-3. Knob Assembly .........................................................................................4-5

Figure 4-4. Hide-a-Hose Assembly..............................................................................4-6

Figure 4-5. Bar Jet Assembly ......................................................................................4-7

Figure 4-6. Handle Accessory Assembly .....................................................................4-8

iii - DriMaster HiFlo Upholstery Tool Owner’s Manual

This page intentionally left blank.

DriMaster HiFlo Upholstery Tool Owner’s Manual - iv

1 - General Information

Congratulations on purchasing the very latest in upholstery cleaning technology.

The patented DriMaster III HiFlo Upholstery Tool, shown in Figure 1-1, is perfect for
cleaning upholstery, fabric and stairs. It has no trigger valve and never needs a separate
dry pass.*

Figure 1-1. DM III Shown with Hide-A-Hose Attached

The tool’s new design incorporates light weight, extremely durable materials, giving the
tool increased levels of strength and comfort.

The DriMaster III HiFlo Upholstery Tool accommodates high volume jobs where production
rate is important.

It is capable of solution ow rates for jobs that require a ushing action which makes the
tool particularly efcient for stair cleaning.

An optional accessory handle is available to increase comfort on long cleaning jobs.

We trust that you will enjoy many years of reliable upholstery cleaning with the DriMaster
III HiFlo Upholstery Tool.

The DriMaster III HiFlo Upholstery Tool can be used with a variety of HydraMaster
cleaning systems.

* U.S. Patent No. RE41,367; 7,070,662; RE39,623; D590,111.

1-1: General Information

CONTACT INFORMATION

If you have any questions regarding the operation, maintenance or repair of this tool,

please contact your local distributor.

To nd a local distributor, please visit our website at

http://hydramaster.com/HowToBuy/DealerLocator.aspx.

If your question cannot be resolved by your distributor or by the information within this

manual, you may contact HydraMaster direct using the following phone numbers.

HOURS TELEPHONE NUMBERS E-MAIL ADDRESSES

Monday-Friday

Technical Support

[phone]

FAX : [phone]

[e-mail]

Technical Support

7:00 a.m. to 5:00 p.m.

Pacic Time

Customer Service/Parts

[phone]

FAX: [phone]

Customer Service/Parts

[e-mail]

When calling your distributor, be sure to reference the date of purchase.

FOR YOUR REFERENCE:

Date of Purchase:_____________________________________________

Purchased From (Distributor): __________________________________

General Information: 1-2

WARNINGS, CAUTIONS AND NOTICES

HydraMaster uses this WARNING symbol throughout the manual to warn of
possible injury or death.

This CAUTION symbol is used to warn of possible equipment damage.

This NOTICE symbol indicates that federal or state regulatory laws may apply,
and also emphasizes supplemental information.

1-3: General Information

This page intentionally left blank.

General Information: 1-4