TYTON® JOINT PIPE
Tyton® Joint
Pipe Size
In.
Pipe
Thickness In.
From To In. A B
3
.25 .40 3.96 5.80 3.00
4 .25 .41 4.80 7.10 3.15
6 .25 .43 6.90 8.63 3.38
8 .25 .45 9.05 10.94 3.69
10 .26 .47 11.10 13.32 3.75
12 .28 .49 13.20 15.06 3.75
14 .28 .51 15.30 17.80 5.00
16 .30 .52 17.40 19.98 5.00
18 .31 .53 19.50 22.00 5.00
20 .33 .54 21.60 24.12 5.25
24 .33 .56 25.80 28.43 5.50
30 .34 .63 32.00 35.40 6.55
36 .38 .73 38.30 41.84 7.00
*Nominal laying length is 18 ft.
Outside
Diameter
*Dimensions In.
ASSEMBLY INSTRUCTIONS
Step 1. Thoroughly clean out the bell with special
attention to the gasket recess. Remove any
foreign material or excess paint. Clean the
spigot or beveled plain end and remove any
sharp edges with a standard file.
Step 2. After making sure that the correct gasket is
being used, insert it into the recess in the bell
with the small end of the gasket facing the bell
face.
Step 3. Apply lubricant to the inside surface of the
gasket, making sure that the entire surface is
coated. Apply a generous coating of lubricant
to the beveled portion of the plain end.
Step 4. Guide the plain end into the bell and, while
maintaining straight alignment, push the
plain end into the bell socket. Once the joint
is assembled, necessary deflection can be
accomplished. When assembly is complete, the
bell face should be aligned between the two
white depth rings, for Tyton
Joints have only 1 assembly stripe.
®
Joints. Fastite®
NEW JERSEY
183 Sitgreaves St.
Phillipsburg, NJ 08865
908-454-1161
mcwaneductile.com
OHIO
2266 S. 6th St.
Coshocton, OH 43812
740-622-6651
mcwaneductile.com
UTAH
1401 E 2000 S.
Provo, UT 84603
801-373-6910
mcwaneductile.com
CANADA
1757 Burlington St. E
Hamilton, ON L8N-3R5
905-547-3251
canadapipe.com
ISO 9001NSF 61 DIPRA
Loading...