U.S. General 92961, BEAD BREAKER Assembly And Operating Instructions Manual

BEAD BREAKER

92961

ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools. Diagrams within this
manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Revised 09i

SKU 92961 Page 2

Specifications

This tool is ideal for breaking the beads of tires to inspect and repair the tire. It will
accept a wide variety of tire sizes and types of tires. The 4-dimension cam lock
will press the tire open at the best angle for dismounting from the wheel.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be fol­lowed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use machines or power tools in
damp or wet locations. Don’t expose to rain. Keep work area well lit. Do not
use electrically powered tools in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.

4. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.

5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.

6. Dress properly. Do not wear loose clothing or jewelry as they can be

Construction Steel Rod and Tubing

Tire Size Capacity

most tire sizes tting passenger car and

light truck models

Features 4 Height Settings

Dimensions

23-1/4” H x 10-3/4” W x2 7-1/4” L

Net Weight 22.30 Lbs.

SKU 92961 Page 3

caught in moving parts. Protective, electrically non-conductive clothes and
non-skid footwear are recommended when working. Wear restrictive hair
covering to contain long hair.

7. Use eye and ear protection. Always wear ANSI approved impact safety
goggles when working. Wear a full face shield if you are producing metal
filings. Wear an ANSI approved dust mask or respirator when working
around metal, wood, and chemical dusts and mists.

8. Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across running machines.

9. Maintain tools with care. Keep tools maintained and clean for better
and safer performance. Follow instructions for lubricating and changing
accessories. The handles must be kept clean, dry, and free from oil and
grease at all times.

10. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.

11. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician.

12. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.

13. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.

14. Maintenance. For your safety, service and maintenance should be
performed regularly by a qualified technician.

15. Only use this product on a flat, level, solid surface.

16. Do not use for aircraft purposes.

Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.