®
ENGINE SUPPORT BAR
Model
96524
SET UP AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in
the back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
IMPORTANT SAFETY INFORMATION
In this manual, on the labeling, and all other information
provided with this product:
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGERDANGER
WARNINGWARNING
CAUTIONCAUTION
NOTICENOTICE
CAUTIONCAUTION
DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
CAUTION, used with the safety alert
symbol, indicates a hazardous situation
which, if not avoided, could result in minor
or moderate injury.
NOTICE is used to address practices not
related to personal injury.
CAUTION, without the safety alert symbol,
is used to address practices not related to
personal injury.
Page 2SKU 96524 For technical questions, please call 1-800-444-3353.
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
re, and/or serious injury. The term “tool” in all of the warnings listed below
refers to your Engine Support.
SAVE THESE INSTRUCTIONS
1.
2.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
a.
Keep children and bystanders away while using the Engine Support.
b.
Distractions can cause you to lose control.
Personal safety
Stay alert, watch what you are doing and use common sense when operating
a.
the Engine Support. Do not use it while you are tired or under the inuence
of drugs, alcohol or medication. A moment of inattention while operating tools
may result in serious personal injury.
Use safety equipment. Always wear eye protection. Safety equipment
b.
such as dust mask, non-skid safety shoes, hard hat, hearing protection,
and work gloves used for appropriate conditions will reduce personal
injuries.
Do not overreach. Keep proper footing and balance at all times. This
c.
enables better control of the tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
d.
clothing and gloves away from moving parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
3.
Tool use and care
Do not force the Engine Support. Do not try to lift more than 1,000 Pounds
a.
with it. Use the correct tool for your application. The Engine Support will do
the job better and safer at or below the weight for which it is rated.
Store idle tools out of the reach of children and do not allow persons
b.
unfamiliar with the tool or these instructions to operate it. Tools are
dangerous in the hands of untrained users.
Maintain the Engine Support. Check for misalignment or binding of moving
c.
parts, breakage of parts and any other condition that may affect the tools
operation. If damaged, have the tool repaired before use. Many accidents
are caused by poorly maintained tools.
Use the Engine Support in accordance with these instructions and in the
d.
manner intended for the particular type of tool, taking into account the working
conditions and the work to be performed. Use of the tool for operations
different from those intended could result in a hazardous situation.
Page 3SKU 96524 For technical questions, please call 1-800-444-3353.
Loading...