Useco SC-15-AF User Manual
Project: Quantity: Item #:
Skate Wheel Conveyor
Models
SC-length-AF
example SC-15-AF
Skate wheel conveyors are specifically designed for
centralized food service systems, where trays are
moved manually along a straight food assembly line.
They may be used separately or attached together for
greater flexibility in creating longer traylines.
FEATURES
• Available in 5’ to 24’ lengths in one
foot intervals. Contact factory for
lengths greater than 24 feet.
• Flexibility — Conveyors may be
used separately or joined together to
form longer assembly line.
• Quiet operation — Trays roll
smoothly and quietly on 2”
diameter, non-marking wheels.
There are only two rows of wheels to
minimize sound.
• Easy to clean and maintain — the
entire stainless steel conveyor can be
steam or hot water cleaned without
removing the wheels.
• Conveyor is mounted on sturdy
stainless steel legs, with adjustable
bullet feet.
• Optional correctional package
available.
PRODUCT INFORMATION
• Construction: Shall be stainless steel,
supported as necessary with aluminized steel
to provide maximum strength and rigidity.
• Conveyor: Trays shall move manually on 2”
diameter wheels which are spaced on 3”
centers in two rows. Wheels shall be molded
of high grade non-marking compound with
self-lubricating bearings.
• Legs: Shall be 1
cross braces equipped with adjustable bullet
feet. Optional casters are available and add
to overall height of 37”.
• Electrical: Construction shall be such that a
separate, stainless steel, drip-resistant wire
raceway is located below the conveyor top
deck. Electric outlets shall be mounted in the
raceway and shall be furnished with water
resistant covers. A circuit breaker panel shall
be furnished with water resistant covers. A
circuit breaker panel shall be furnished located
at the loading end of the conveyor. Standard
wiring shall be 120/208/240 volt, single phase,
125 amp load center with four standard
electrical outlets (up to 30 amps each) with a
maximum of 100 amperes, full load. Additional
outlets will require an optional electrical
system.
5
⁄8” O.D. stainless steel with 11⁄4”
1
⁄2”
Savannah, TN 38372 www.americanfoodserviceco.com
731-925-2200 / 800-447-4693 / FAX 731-925-2840
Skate Wheel Conveyor
SC-length-AF (SC-15-AF)
TECHNICAL SPECIFICATIONS
Dimensions
Model #
SC-05-AF
SC-06-AF
SC-07-AF
SC-08-AF
SC-09-AF
SC-10-AF
SC-11-AF
SC-12-AF
SC-13-AF
SC-14-AF
SC-15-AF
SC-16-AF
SC-17-AF
SC-18-AF
SC-19-AF
SC-20-AF
SC-21-AF
SC-22-AF
SC-23-AF
SC-24-AF
NOTE:
conveyors require width adapter.
*For conveyors mounted on optional casters add suffix
“C” to model number. For optional electrical raceway add
suffix “E”.
**Height with casters is 371⁄2”.
Approx. Shipping
L W H** Weight (lbs.)
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
Please state tray size to be used. Skate wheel
18”
18”
18”
18”
18”
18”
18”
18”
18”
18”
18”
18”
18”
18”
18”
18”
18”
18”
18”
18”
37”
37”
37”
37”
37”
37”
37”
37”
37”
37”
37”
37”
37”
37”
37”
37”
37”
37”
37”
37”
200
230
260
290
320
350
370
390
410
430
450
460
470
480
490
500
510
520
530
540
BID SPECIFICATIONS
Model _______ Skate Wheel Conveyor. Overall
dimensions shall be __” wide x __” long x __” high.
All seams shall be continuously welded and
polished. A 3⁄8” stainless steel support rod shall run
the length of the unit and be welded to each spacer
in the center. Tray wheels shall be 2” diameter and
non-marking and set in two rows. Electric shall be
separate in a stainless steel drip-resistant wireway
with water resistant cover on all outlets mounted in
the raceway. Leg stands shall be 15⁄8” O.D. stainless
steel with 11⁄4” cross braces and equipped with
adjustable leveling bullet feet.
OPTIONAL ACCESSORIES
• Three shelf starter station shelves on 8” spacing.
First and second shelves cut out for 12” x 20” pans.
(Pans not included.)
• Circuit breaker panel and electric raceway.
• Casters in lieu of legs with adjustable feet. Add 1⁄2”
to overall height.
• Optional correctional package available.
Savannah, TN 38372 www.americanfoodserviceco.com
731-925-2200 / 800-447-4693 / FAX 731-925-2840
Due to continued product improvement, specifications are subject to change without notice. 2013 USA
Loading...