Urschel SPRINT User Manual
DiversaCut SPRINT® Dicer
High Performance Small Dicer
SPECIFICATIONS
Length: ....................... 54.33" (1380 mm)
Width: ........................ 53.82" (1367 mm)
Height: ....................... 65.31" (1659 mm)
Net Weight: ..................... 860 lb (391 kg)
Motor: ......................... 1.5 HP (1.1 kW)
APPLICATIONS
The DiversaCut Sprint® Dicer, by Urschel Laboratories, uniformly dices,
strip cuts, granulates, and slices a wide variety of vegetables, fruits,
bakery goods, and meats.
The compact size of the Sprint combined with the ease of switching
over from one cut size or type to another deliver innite production
possibilities.
Maximum product input size is approximately 6.5" (165 mm) in any
dimension. The machine features continuous operation for uninterrupted
production and is designed for easy cleanup and maintenance.
1
2
3
4
DiversaCut SPRINT® Dicer
TYPES OF CUTS
Slices: By removing the crosscut spindle and the circular knife spindle,
the machine can make slices thru the full range of slice thicknesses.
• Flat slices: 1/16 to 1" (1.6 to 25.4 mm)
• Crinkle slices: 1/8 to 1" (3.2 to 25.4 mm)
Strip cuts: Flat and crinkle strip cuts in a variety of widths can be made
by removing either the crosscut knife spindle or the circular knife spindle
assembly.
Minimum at strips such as .079 x 1/8" x length of product (2 x 3.2
mm x length of product); crinkle strips such as 9/32 x 9/32" x length of
product (7.1 x 7.1 mm x length of product); Maximum at strips such as
1 x 1" x length of product (25.4 x 25.4 mm x length of product); crinkle
strips such as 5/8 x 5/8" x length of product (15.9 x 15.9 mm x length of
product). Note: Combinations of circular knives or crosscut knives can
be used to shorten length of strips.
OPERATING PRINCIPLE
Product is delivered to a feed hopper, then enters a rotating impeller [ 1 ].
The resulting centrifugal force holds the product against the inside of
the case as the impeller paddles carry the product past the slicing knife
[ 2 ]. An adjustable case gate on the slicing case allows product to move
outward across the edge of the slicing knife. The distance between the
edge of the slice gate and the slicing knife edge determines the slice
thickness.
As the slices emerge, they are guided between the slicing knife and
stripper plate before entering circular knives [ 3 ] where they are cut into
strips. The strips pass directly into the crosscut knives [ 4 ] which make
the nal cut.
Dices/Granulations: A slicing knife, circular knife spindle, and crosscut
knife spindle are used for dicing. Changing the dice size is done by
using the required cutting spindles and adjusting the slice thickness.
• Circular knife cuts: 1/8 to 3" (3.2 to 76.2 mm)
• Crosscut knife cuts: 3/32 to 1" (2.4 to 25.4 mm)
• Crosscut knife crinkle cuts: 9/32 to 9/16" (7.1 to 14.3 mm)
If your product application is not mentioned on this page, contact your local
Urschel representative to determine the most effective solution to your size
reduction needs.
(over)
DiversaCut SPRINT® Dicer
Dimensional Drawing
Your Product Can Be Test Cut
Urschel Laboratories has a complete network of test facilities and
experienced service and sales representatives around the world
ready to work for you on any size reduction application. Contact
your local Urschel Laboratories’ representative to schedule a comprehensive, no-obligation test today at www.urschel.com.
®DiversaCut, DiversaCut Sprint, and Urschel are registered trademarks of Urschel Laboratories, Inc. L2576 November 2013 (s.s. L2286)
Loading...